7% Goods Service Tax (GST) will be imposed over the total invoice value if purchased locally in Singapore. However if you are a tourist visiting Singapore, this GST amount can be
refunded at the Changi International Airport Departure Hall / Seletar Airport Passenger Terminal / Marina Bay Cruise Centre Singapore/ International Passenger Terminal at Harbourfront Centre
GST Refund Centre before departure with goods within 2 months from the date of purchase. Please note that only Tourists who have met the Tourist Refund Scheme's conditions and eligibility criteria can
claim for the GST refund. Please visit: https://www.iras.gov.sg/IRASHome/GST/Consumers/Tourist-Refund-Scheme/
for GST Guide for Visitors on Tourist Refund Scheme. |
|
Product Code: PINMIC
(Discontinued)
 |
• Intuitive And Subtle
• Omni-directional polar pattern
• Removable Mesh Head
• Ultra Discreet Appearance
• Lightweight And Easy To Position
• High Quality Performance
• Low Noise Miniature Microphone Capsule
• Low Handling Noise
• Universal Compatibility
RØDE MiconTM interconnectivity system provides seamless integration with a wide range of wireless systems
Includes mini-furry, anti-trauma case, spare capsule and PinMic tool kit
The RØDE PinMic™ is a discreet lavalier/lapel microphone with an innovative pin-through design that is not only easier to conceal than a traditional lapel microphone, but provides greater mounting versatility.
Comprised of a cabled backplate and a removable omni-directional capsule head,
the PinMic™ is easily mounted onto any clothing or fabric by simply pushing the backplate pins through the back of the fabric and sliding the capsule into place on the front. The microphone backplate and cable are hidden behind the fabric,
and the capsule head can be easily disguised, covered or decorated to further conceal the microphone.
The PinMic™ capsule is discrete at only 9mm deep and 11mm in diameter, and is
supplied with both a black and an unpainted silver mesh head that can be further camouflaged by painting.
The microphone easily mounts through any fabric up to 1.5mm (0.006") thick
without any damage to clothing. A longer pin version (PinMic-Long) is available for mounting on thicker fabrics (up to 3.5mm/0.14" thick).
The microphone capsule is connected via a 1.2m (4') shielded, detachable Kevlar®
reinforced cable that has been rigorously strain tested to ensure reliable performance.
The included mini-furry for high wind protection ensures quality recordings in
adverse environments, while the anti-trauma water resistant case provides rugged and secure protection for the microphone, a spare capsule head, the microphone
cable and included accessories.
The PinMic™ is an ideal solution for film, television, video, theatre, house of worship and anywhere where a high quality microphone needs to be heard but not
seen.
Knowing that versatility is paramount in any product, RØDE has developed the MiCon™ connector system which provides seamless integration between the PinMic™
and a wide range of wireless systems as well as consoles, cameras and portable recorders.
The RØDE PinMic™ lapel microphone is designed and made in Australia and is
covered by RØDE Microphones' innovative 5 year 'no questions asked' warranty which provides 12 months of complete cover, and an optional US$99 replacement
microphone during the extended warranty period.
The package includes
• PinMic Discreet Pin-through Lapel Microphone
• CLIP1 MiCon Cable Management Clip
• Unpainted mesh head
• DeadMouse-Pin
• Anti-Trauma Case
• Tool Kit |
| Acoustic Principle |
Pressure Gradient |
| Active Electronics |
JFET impedance converter |
| Capsule |
0.10" |
| Polar Pattern |
Omnidirectional - picks up all sides equally |
| Address Type |
End |
| Frequency Range |
60Hz - 18kHz |
| Output Impedance |
3000Ω |
| Maximum SPL |
110dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level |
189.0mV (@ 1kHz, 1% THD into 1KΩ load) |
| Sensitivity |
-33.5dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) |
25dB-A |
| Power Options |
+48V phantom power required from mixer or interface |
| Weight |
10.00gm |
| Dimensions |
16.00mmH x 22.00mmW x 33.00mmD |
| Output |
MiCon™ Output - requires MiCon™ adapter (sold separately) |
| Warranty |
1 year with free extension to 5 years |
|
|
|
|
|
