AZDEN 1200SiX UHF Plug-In SYSTEM

Whether you use a Panasonic® or Ikegami® camera with "slot-in" receiver capabilities, or use the Anton-Bauer® Gold Mount®, or a V-Mount battery, there's an Azden 1200 designed specifically for your use.
The all new receivers and transmitters include:

• New compander circuit for more natural sound

• New DTV-compatible (188) frequencies covering 4 UHF TV bands

• True diversity system with 2 complete front-ends and high-gain antennas

• Dielectric filters throughout, for improved image rejection and superior diversity isolation

• High 5th-order filters for improved S/N ratio

• Multi-function LCD shows channel, frequency, battery info, AF level, and diversity operation
  Ships with the 1200XT

RECEIVER SPECIFICATIONS:
RF Carrier Frequency Range: 188 steps ~ 638.125 - 661.875 MHz
MicroComputer Controlled PLL Synth.
Noise Reduction Expander (THAT)
Effective Operating Range: 200 - 300 ft ~ 60 - 100m
Frequency Response: 50 - 15kHz (± 1.5dB)
RF Sensitivity (12dB SINAD): 1.2μV
Adjacent Channel Selectivity: > 70dB (± 250kHz)
Image Rejection: > 93dB
IF Rejection: > 93dB
Audio THD: > 0.8%
Audio Output: -20dBm ± 40kHz Deviation
Output Impedance: 300Ω
Signal/Noise Ratio: > 62dB (± 5kHz Deviation) “A” Weighted
Power Requirements: 10 - 17V DC @ 200mA
Dimensions: 68W x 84H x 18D mm
Operating Temperature Range: -50 - +122 F ~ -10 - +50 C
Weight: 8.8 ounces ~ 250g

PLUG-IN SPECIFICATIONS:
Max Modulation Sensitivity: +20dBM ~ 0dBm
MIC Level / Imped. (Dynamic): -60dBm / 2.2kΩ (± 5kHz Dev.)
Phantom Power: 48V ±2V @ 2mA
Power Requirements: 3V DC (2 “AA” Alkaline) @ > 180mA - 290 mA w/Phantom Power ON
Dimensions: 1.57 (W) x 4.49 (H) x 1.57 (D) inches
40 (W) x 114 (H) x 40 (D) mm
Weight w/Battery: 6.35 ounces ~ 180g