|
The 100LTH System consists of the 100UPR receiver,
a 10HT handheld transmitter/mic and a 10BT bodypack transmitter
with lavalier mic.
The new 100UPR receiver features twin-antennas a 3.5mm -58dbB
balanced mic level output jack a 3.5mm monitor output jack (with
level control) a recessed On/Off switch a Power On/ Signal Received
LED and channel selectors to set the desired frequency. Using
crystal-control and PLL synthesis the 100UPR operates for better
than 8 hours on a single 9V battery. The receiver comes with a
"hot-shoe" mount, hook-and-loop mounting tape and a 3.5mm to 3.5mm
output cable (Azden's MX-1 3.5mm - to - XLR cable is optional).
Included is the new UHF handheld microphone - the 10HT, whicih is
designed to work seamlessly with the on-camera 100UPR receiver. The
new mic features Azden’s special surface coating to reduce
handling noise. Using an electret-condenser unidirectional element,
the 10HT is designed with low-noise PLL circuitry to allow the user
to select any one of 63 UHF channels to assure interference free
reception in the 794-806MHz range.
The 10HT uses two commonly available alkaline “AA”
batteries to operate for better than 8 hours. The 10HT is 230mm
(9") long and 44mm (1.73") in diameter.
Also included is the new 10BT body-pack transmitter, which is
supplied with an Azden EX-503 omni-directional lapel microphone and
a metal belt-clip. In addition to the 3.5mm mic input jack the
transmitter has a Power On switch with an associated LED a separate
Standby switch for audio muting and a set of channel selector
switches. It also runs better than 8 hours on a single 9V
battery.
100UPR
Frequency
Range
UHF 63-Channel Selectable (793.750-805.875MHz)
Type of
Reception
Antenna Diversity
Oscillator
PLL Synthesized
RF Squelch
Level
16dBµV
Frequency
Response
50Hz -15kHz
S/N
Ratio
>70dB “A” Weighted
Audio
Distortion
<1% @ 1kHz
Operating
Temp
0°C –50°C (32°F -122°F)
MIC Out
(Balanced)
–58dBm @ 600 Ω
Monitor
Out
–10dBm (Max) @ 33 Ω
MIC Out
Connector
3.5mm Balanced Mini-Jack
Monitor Out
Connector
3.5mm Stereo Mini-lack
Power
Requirement
1- 9V Alkaline Battery
Battery
Life
6 - 8 Hours w/Alkaline Battery
Dimensions
62W x 100H x 22D mm (2.44W x 3.94H x 0.87D inches)
Weight
Approx.
120g Including Battery (4.23oz)
10HT Transmitter
Frequency
Range
UHF 63-Channel Selectable (793.750 – 805.875MHz)
Oscillator
PLL Synthesized
RF
Power
10mW
Frequency
Response
50Hz – 12kHz
Max.
Deviation
±75kHz @ 1kHz Modulation, MIC Input –11dBm
S/N
Ratio
>70dB “A” Weighted
Audio
Distortion
<1% @ 1kHz
MIC
Element
ECM
MIC
Sensitivity
±5kHz @ -46dBm (0dBm+0.775V)
Operating
Temp.
0°C – 50°C (32°F – 122°F)
Power
Requirement
2 – 1.5V “AA” Alkaline Batteries – 8-10
Hours
Dimensions
230H x Ø 44D mm (9.05H x 1.73D inches)
Weight
Approx. 130g Including Batteries (4.58oz)
10BT Transmitter
Frequency
Range
UHF 63-Channel Selectable (793.750 – 805.875MHz)
Oscillator
PLL Synthesized
RF
Power
10mW
Frequency
Response
50Hz – 15kHz
Max.
Deviation
±75kHz @ 1kHz Modulation, MIC Input –11dBm
S/N
Ratio
>70dB “A” Weighted
Audio
Distortion
<1% @ 1kHz
MIC
Sensitivity
±40kHz @ -22dBm MIC Input (0dBm+0.775V) - 3.5mm Mini Jack
Operating
Temp.
0°C – 50°C (32°F – 122°F)
Power
Requirement
1 – 9V Alkaline Battery - 6 – 8 Hour
Dimensions
62W x 100H x 22D mm (2.44W x 3.94H x 0.87D inches)
Weight
Approx. 120g Including Battery (4.23oz)
|
