|
Whether you use a
Panasonic® or Ikegami® camera with "slot-in" receiver
capabilities, or use the Anton-Bauer® Gold Mount®, or a
V-Mount battery, there's an Azden 1200 designed specifically for
your use.
The all new receivers and transmitters include:
-
New compander
circuit for more natural sound
-
New DTV-compatible
(188) frequencies covering 4 UHF TV bands
-
True diversity
system with 2 complete front-ends and high-gain
antennas
-
Dielectric filters
throughout, for improved image rejection and superior diversity
isolation
-
High 5th-order
filters for improved S/N ratio
-
Multi-function LCD
shows channel, frequency, battery info, AF level, and diversity
operation
Ships with the 1200XT
RECEIVER SPECIFICATIONS:
RF Carrier Frequency Range: 188 steps ~ 638.125 - 661.875 MHz
MicroComputer Controlled PLL Synth.
Noise Reduction: Expander (THAT)
Effective Operating Range: 200 - 300 ft ~ 60 - 100m
Frequency Response: 50 - 15kHz (± 1.5dB)
RF Sensitivity: (12dB SINAD) 1.2μV
Adjacent Channel Selectivity: > 70dB (± 250kHz)
Image Rejectio:n > 93dB
IF Rejection: > 93dB
Audio THD > 0.8%
Audio Output: 40dBm ± 40kHz Deviation
Output Impedance: 600Ω
Signal/Noise Ratio: > 62dB (± 5kHz Deviation)
“A” Weighted
Power Requirements: 11 - 15V DC @ 220mA
Dimensions: 93W x 119H x 49D mm - 1200URX/AB
Operating Temperature Range: -50 - +122 F ~ -10 - +50 C
Weight:15.87ounces ~ 450g
PLUG-IN
SPECIFICATIONS:
Max Modulation Sensitivity: +20dBM ~ 0dBm
MIC Level / Imped. (Dynamic): -60dBm / 2.2kΩ (± 5kHz
Dev.)
Phantom Power: 48V ±2V @ 2mA
Power Requirements: 3V DC (2 “AA” Alkaline) @ >
180mA - 290 mA w/Phantom Power ON
Dimensions: 1.57 (W) x 4.49 (H) x 1.57 (D) inches
40 (W) x 114 (H) x 40 (D) mm
Weight w/Battery: 6.35 ounces ~ 180g
|
> AZDEN > UHF
> 1200ABX
