A new UHF handheld microphone - the 10HT is
designed to work seamlessly with the on-camera 100UPR receiver. The
new mic features Azden’s special surface coating to reduce
handling noise. Using an electret-condenser unidirectional element,
the 10HT is designed with low-noise PLL circuitry to allow the user
to select any one of 63 UHF channels to assure interference free
reception in the 794-806MHz range.
The new
microphone uses two commonly available alkaline “AA”
batteries to operate for better than 8 hours. The 10HT is 230mm
(9") long and 44mm (1.73") in diameter.
Technical Specs:
Frequency Range: UHF 63 channel selectable (793.750 -
805.875MHz)
Oscillator: PLL synthesized
RF Power: 10mW
Frequency Response: 50Hz - 12kHz
Max. Deviation: +/- 75kHz @ 1kHz modulation, Mic input - 11dBm
S/N Ratio: better than 70dB "A" weighted
Audio Distortion: less than 1% @ 1kHz
Mic Element: ECM
Mic Sensitivity: +/- 5kHz @ -46dBm (0dBm +0.775V)
Operating Temp.: 0 - 50 C (32 - 122 F)
Power Requirement: 2 "AA" Alkaline batteries (2x 1.5VDC)
Battery Life: 8-10 hours w/Alkaline batteries
Dimensions; 230H x 44 mm (9.05 x 1.73")
Weight: approx. 130g w/batteries (4.58 oz)
|