|
A portable 2-channel field mixer designed for use
by the professional videographer, the small (4" x 1.65" x 5"), all
metal, battery operated (9V) mixer can be attached directly to the
camera with supplied hook-and-loop mounting tape or belt-worn using
the 3-position belt clip. The FMX-20 has the following features:
enhanced circuitry for improved signal-to-noise ratio, 3-step LED
array for easy signal monitoring, a 12V DC input for external
power, switchable input limiter to reduce possibility of overload
distortion, channel-addressable 1/4" monitor headphone jack with
level control.
It also has: 2 balanced XLR mic inputs, 2 channel
addressable balanced XLR line-level outputs with level controls, a
stereo mini-jack (3.5mm) output, and a POWER On/Off/Low Battery LED
indicator.
Technical Specs:
Frequency Response
Main and Unbalanced Output: 40-17,000Hz (-3dB)
Monitor Output: 50-17,000Hz (-3dB)
Noise Level
Mic (-50): -55dB
Line (+0): -57dB
T.H.D.: 0.15% @ 1KHz
MIC Input Level
Electronic Balanced: -50dBu
MIC Output Level
Switchable Electronic Balanced: 50dBu
Unbalanced Output
3.5mm Stereo: -50dBu
Monitor Output
3.5mm Stereo (Max Load 16 ohm): -18dBu
Main Output
0.5dBu with 600 ohm load 0dBu ref @ 0.775Vrms
0.5dBu with 1000 ohm load 0dBu ref @ 0.775Vrms
Unbalanced Output
-32dBu with 600-1000 ohm load 0dBu ref @
0.775Vrms
Battery Type/Duration: 9-Volt Alkaline (006p
type): 6 Hours
Current Draw: 38mA nominal - 50mA maximum
Size: 42H x 130W x 103D mm (1.65 x 5.1 x 4.05 inches)
Weight with Battery: 21.2 ounces (601 grams)
|
