|
Product Code: c519m/c519ml
|
The C 519
clips onto the bell of a trumpet, saxophone, trombone, tuba, or any
other wind instrument (e.g. didgeridoo). Room to move for the wind
section at last! Its tight cardioid polar pattern makes the C 519
an ideal tool for use near monitor wedges, and its flat frequency
response delivers a natural, powerful, and clear
sound.
The C 519 M features an integrated, switchable bass
cut for adjusting the microphone’s frequency response to your
instrument's sound. The unique adapter plate A 400 allows easy
attachment of the AKG pocket transmitters.
|
| C519M/C519ML
Features |
- Miniature condenser clip-on microphone for
wind instruments, drums, and percussions
- Miniature gooseneck for accurate microphone
alignment
- Including wireless direct adapter for easy
use with AKG pocket transmitters
|
- Detachable microphone cable
- Transducer shock mount for high
mechanical-noise rejection
|
|
| C519M/C519ML
Specifications |
- Polar pattern: cardioid
- Frequency range: 60 Hz to 20
kHz
- Sensitivity: 5 mV/Pa (-46
dBV)
- Max. SPL: 130/132 dB SPL (for 1 %/3 %
THD)
- Equivalent noise level: 31
dB(A)
- Signal/noise ratio (A-weighted): 63
dB
- Impedance: <= 200 ohms
- Recommended load impedance: >= 2000
ohms
- Powering: <= 2 mA
- Power requirement: B 29 L battery power
supply, MPA V L phantom adapter, AKG WMS bodypack
transmitters
- Connector: 3-pin mini XLR
|
- Cable: 1.5 m (5 ft.)
- Finish: matte black
- Dimensions: Length: 213 mm (8.4 in.)
(microphone only); max. width: 47 mm (1.9 in.)
- Net weight: C 519 M: 195 g (6.9 oz.)
C 519 ML: 85 g (3 oz.) (microphone and cable)
- Shipping weight: C 519 M: 430 g (15.2
oz.)
C 519 ML: 310 g (11 oz.)
|
|
|
C519M/C519ML Standard Accessories
|
-
A 400, Adapter
-
Protective bag
|
|
|
|
