|
Product Code: amm10
|
The AMM 10
is the perfect solution for small rooms: a distributed mixing
system consisting of various input and output modules designed to
fit standard installation frames. No need for a central unit or a
rack for the sound equipment – the mixing modules are
directly mounted into cable conduit, walls, ceilings, tables
… Wherever you require a microphone input or an audio
connector for your PC or CD player, the AMM 10 is the system of
your choice.
Each of the modules comes with a low noise, high efficient
amplifier and a plug terminal connector. Connected via CAT 5
cables, the system is extremely flexible and easy to install.
Mic/Line Input Module:
Input module for dynamic microphones and symmetrical line level
signals. The module provides an input level control as well as a
switch to define the designated panorama position (left, middle,
right).
AUX Input Module:
Input module for line level signals from CD, DVD, PC or MP 3
players. The module provides two cinch and one jack connector
inputs and an input level control.
Headphone Output Module:
The headphone output monitoring module provides an output volume
control, a 2 x 4 step bargraph display and a 3.5 mm jack connector
output.
Stereo Line Out Module:
Break-out-box for supermodular mixer system. The module provides 2
XLR connectors for the connection of two active speakers.
C-Mic Input Module with Phantom Power:
Input module for condenser microphones. The module provides a 24 V
phantom power supply, input level control as well as a switch to
define the designated panorama position (left, middle, right).
Recording Output Module:
The recording output module works as a driver for recording devices
like CD recorders, tape decks, PCs, MP3 recorders, etc. On the
front panel the module provides 2 RCA connectors, a 3.5 mm jack
connector output and an output volume control.
Control and SUM Output Module:
Stereo sum amplifier module with tone control for treble and bass
as well as an output level control. The internal plug terminal
provides the sum output and a separate recording output (with fixed
output level). The plug terminal also provides terminals for the
signal bus including strain relief and an insert point for a remote
control (to be introduced later).
|
