|
Top-of-the-line portable projectors with high
picture quality, flexible installation, and advanced functions, including
wireless projection*2 and DIGITAL LINK connectivity*2.
*2 For the
PT-VZ575N / VW535N / VX605N. |
| Power supply |
AC120 V, 50/60 Hz (North America),
AC110 V, 60 Hz
(Taiwan),
AC100-240 V, 50/60 Hz (other countries) |
| Power consumption |
356 W (North America),
362 W (Taiwan),
362 W
(other countries) |
Standby
power
consumption |
Standby Mode (Eco) *1 |
0.2 W (North America), 0.2 W (Taiwan), 0.4 W (other
countries) |
| Standby Mode (Normal) |
8 W |
| LCD panel |
Panel size |
16.0 mm (0.63 in) (4:3 aspect ratio) |
| Display method |
Transparent LCD panel (x 3, R/G/B) |
| Pixels |
786,432 (1,024 x 768) x 3, total of 2,359,296 pixels |
| Lens |
1.6x manual zoom (throw ratio: 1.2-1.9:1),
manual
focus, F 1.60-1.90, f 15.31-24.64 mm |
| Lamp |
270 W x 1,
lamp replacement cycle (lamp power:
Normal/Eco): 5,000 hours/7,000 hours*2 |
| Screen size (diagonal) |
0.76-7.62 m (30-300 in), 4:3 aspect ratio |
| Brightness*3 |
5,500 lm (input signals: PC, lamp power: Normal, picture
mode: Dynamic) |
| Center-to-corner uniformity*3 |
85 % |
| Contrast*3 |
10,000:1 (full on/off)
(input signals: PC, lamp
power: Normal, picture mode: Dynamic, iris: On) |
| Resolution |
1,024 x 768 pixels*4 |
| Scanning frequency |
HDMI/
DIGITAL LINK |
525i (480i)*3, 625i (576i)*5, 525p (480p), 625p (576p),
750 (720)/60p, 750 (720)/50p,
1125 (1080)/24p, 1125 (1080)/24sF, 1125
(1080)/25p, 1125 (1080)/30p, 1125 (1080)/60p, 1125 (1080)/50p, 1125 (1080)/60i,
1125 (1080)/50i,
Displayable resolution: VGA to WUXGA (non-interlace),
Dot clock frequency: 25 MHz to 162 MHz
(compatible with HDCP, DIGITAL LINK
not included on PT-VX600) |
| RGB (analog) |
fH: 15-91 kHz, fV: 24-100 Hz, dot clock: 162 MHz or
lower |
| YPBPR (YCBCR) |
fH: 15.73 kHz, fV: 59.94 Hz [480i (525i)],
fH: 31.47
kHz, fV: 59.94 Hz [480p (525p)],
fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p],
fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i],
fH: 28.13 kHz, fV: 25 Hz [1080
(1125)/25p],
fH: 27.00 kHz, fV: 48 Hz [1080 (1125)/24sF],
fH: 67.50 kHz,
fV: 60 Hz [1080 (1125)/60p],
fH: 15.63 kHz, fV: 50 Hz [576i (625i)],
fH:
31.25 kHz, fV: 50 Hz [576p (625p)],
fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p],
fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i],
fH: 27.00 kHz, fV: 24 Hz [1080
(1125)/24p],
fH: 33.75 kHz, fV: 30 Hz [1080 (1125)/30p],
fH: 56.25 kHz,
fV: 50 Hz [1080 (1125)/50p] |
| Video/S-Video |
fH: 15.73 kHz, fV: 59.94 Hz [NTSC / NTSC4.43 / PAL-M /
PAL60],
fH: 15.63 kHz, fV: 50 Hz [PAL / PAL-N / SECAM] |
| Optical axis shift |
Vertical: +40 %, U/D ratio on top end: 9:1 |
| Keystone correction range |
Vertical: ±35° (auto/manual, input: XGA),
horizontal:
±35° (manual, input: XGA) |
| Installation |
Ceiling/floor, front/rear |
| Terminals |
HDMI IN |
HDMI 19-pin x 2 (compatible with
HDCP),
audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32
kHz) |
| COMPUTER 1 IN |
D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR/YC x 1) |
COMPUTER 2 IN /
MONITOR OUT |
D-sub HD 15-pin (female) x 1 (RGB x 1), (input/output
selectable using on-screen menu) |
| VIDEO IN |
Pin jack x 1 (Composite VIDEO) |
| AUDIO 1 IN |
M3 x 1 (L-R x 1) |
AUDIO 2 IN
(MIC IN) |
M3 x 1 (L-R x 1) for audio input or for microphone
connection (variable) |
| AUDIO 3 IN |
Pin jack x 2 (L, R x 1) |
| AUDIO OUT |
M3 x 1 (L-R x 1) for output (variable) |
| SERIAL IN |
D-sub 9-pin (female) x 1 for external control (RS-232C
compliant) |
| USB A |
-- |
| USB B |
-- |
LAN/
DIGITAL LINK |
RJ-45 x 1 (for network connection, 10Base-T, 100Base-TX,
compliant with PJLink™ |
| Built-in speaker |
4 cm round shape x 1, output power: 10 W (monaural) |
| Noise level*3 |
37 dB (lamp power: Normal), 29 dB (lamp power: Eco) |
| Cabinet materials |
Molded plastic |
| Dimensions (W x H x D) |
389 x 125.0*6 x 332 mm (15-5/16 x 4-29/32*6 x 13-1/16
in) |
| Weight*7 |
Approx. 4.8 kg (10.6 lbs) |
| Operating temperature |
0°C-40°C [32°F-104°F] (less than 1,200 m [3,937 ft]
above sea level),
0°C-30°C [32°F-86°F] (between 1,200 m and 2,700 m [3,937 ft
and 8,858 ft] above sea level)*8 |
| Operating humidity |
20-80 % (no condensation) |
| Supplied accessories |
Power cord with power cord holder x 1*11, wireless
remote control unit x 1,
batteries (AAA/R03/LR03 type x 2), computer cable x
1,
Software CD-ROM (Logo Transfer Software, Multi Projector Monitoring &
Control Software) |
*1 When the Standby mode is set to
Eco, network functions such as power on over the LAN network will not operate.
Also, only certain commands can be received for external control using the
serial terminal.
*2 The usage environment affects the duration of the lamp.
*3 Measurement, measuring conditions, and method of notation all comply with ISO
21118 international standards.
*4 Input signals that exceed this resolution
will be converted to 1,024 x 768 pixels.
*5 Pixel-repetition signal (dot
clock frequency: 27.0 MHz) only.
*6 With legs at shortest position.
*7 The
above values are averages. Actual values may be different according to the
product.
*8 When the ambient operating temperature is 35-40 °C (95-104 °F),
[Lamp Power] will switch automatically to [Eco mode].
*9 This is a
theoretical speed. The actual transfer speed varies depending on the usage
environment and connected devices.
*10 Operation range differs depending on
environments.
*11 Power cords available (x 2) for the UK and Asia only.
Caution
Do not install the projector in locations that
are subject to excessive water, humidity, steam or oily smoke. Doing so may
result in fire, malfunction or electric shock.
NOTES ON USE
1 The projector uses a high-voltage mercury lamp under high internal pressure.
This lamp may break, emitting a popping sound, or fail to illuminate, due to
impact or extended use.
2 The high-wattage lamp becomes very hot during
operation. Please observe the following precautions:
• Never place objects on
top of the projector while it is in operation.
• Make sure there is an
unobstructed space of 1,000 mm (39-3/8 in) or more around the projector’s
exhaust openings.
• If stacking projector units, care must be taken to
provide the recommended space between units. These space requirements also apply
to installation where only one projector unit is operating at one time and the
other unit is used as a backup.
• If the projector is placed in a box or enclosure, the temperature of the air
surrounding the projector must match the operating temperature listed in the
specifications table during use. Also, make sure the projector’s intake and
exhaust openings are not blocked. Ensure there is sufficient ventilation to
prevent hot air from the exhaust openings being re-circulated into the intake
opening.
3 The lamp replacement cycle duration becomes shorter if the
projector is operated repeatedly for short periods.
• The lamp replacement
cycle varies greatly depending on individual lamp characteristics and usage
conditions.
• The brightness of the lamp will gradually decrease with use.
4 Due to natural characteristics of lamps, screen brightness may fluctuate. This
is not an indication of faulty lamp performance. |
|
|
