|
| The PT-LX26H is a lightweight and portable projector with XGA (1,024 x 768 pixels) resolution that delivers 2,600 lumens of brightness, has a variable iris and a 2,500:1
contrast ratio. In addition to a 4,000 hour maximum lamp and filter replacement cycle, a Real-Time Keystone correction will automatically square the image during setup while Colorboard and
Blackboard preset picture modes adjust colors to provide high-quality projection in the absence of a screen. Remote monitoring and operation over a Local Area Network (LAN) with
Panasonic's Multi Projector Monitoring and Control Software is simple and available for download |
• 2600 lm of Brightness and 2500:1 Contrast
• Maximum 4000 hour lamp replacement cycle and 6000
hour air filter replacement cycle
• Quiet 29-db design does not interrupt meetings or classes
• Intelligent lamp control system reduces Power
Consumption
• Displaying the total amount of reduced power consumption and CO2 emission
• 10-Watt speakers and a microphone input enables audio playback directly from the projector. |
| Panel Size |
0.55 inches diagonal (4:3 aspect ratio) |
| Display Method |
Transparent LCD Panel (X3 R/G/B) |
| Pixels |
786,432 (1,024 x 768) x 3, total of 2,359,296 pixels |
| Lamp |
230 W x 1 |
| Brightness |
2,600 lm (lamp power: High, Normal/Eco) |
| Contrast Ratio |
2,500:1 |
| Resolution |
1,024 × 768 pixels |
| Lens |
1.2x manual zoom, manual focus, F 2.10-2.25, f 19.11-22.94 mm |
| Screen Size |
0.76-7.62 m (30-300 inch) |
| Optical Axis Shift |
6:01 |
| Scanning Frequency |
RGB |
fH: 15-100 kHz, fV: 50-100 Hz, dot clock: 140 MHz or lower |
| YPBPR (YCBCR) |
fH: 15.75 kHz, fV: 60 Hz [480i(525i)]
fH: 31.50 kHz, fV: 60 Hz [480p(525p)]
fH: 45.00 kHz, fV: 60 Hz [720(750)/60p]
fH: 33.75 kHz, fV: 60 Hz [1080(1125)/60i]
fH: 15.63 kHz, fV: 50 Hz [576i(625i)]
fH: 31.25 kHz, fV: 50 Hz [576p(625p)]
fH: 37.50 kHz, fV: 50 Hz [720(750)/50p]
fH: 28.13 kHz, fV: 50 Hz [1080(1125)/50i] |
| S-Video/Video |
fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM] |
| Terminals |
COMPUTER IN 1 / S-VIDEO |
D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR/S-VIDEO x 1)
(The D-Sub/S-VIDEO conversion cable ET-ADSV is required for inputting S-VIDEO signals.) |
| COMPUTER IN 2 / MONITOR OUT |
D-sub HD 15-pin (female) x 1 (RGB×1), (input/output selectable using on-screen menu)
(When Monitor Out is selected, the COMPUTER IN 1 signal is output.) |
| VIDEO In |
RCA pin × 1 (composite video) |
| S-VIDEO In |
Mini DIN 4-pin × 1 (S-Video) |
| AUDIO In |
RCA pin x 2 (L-R x 1) for VIDEO input |
| COMPUTER AUDIO IN 1 |
M3 x 1 (L-R x 1) |
| SERIAL In |
D-sub 9-pin (male) × 1 for external control (RS-232C compliant) |
| LAN |
RJ-45 × 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™ (class 1)) |
| Built-In Speaker |
3.2 cm round shape x 1, output power: 1 W (monaural) |
| Noise Level |
37.0 dB (lamp power: High), 34.1 dB (lamp power: Normal), 29.0 dB (lamp power: Eco) |
| Installation |
Ceiling/floor, front/rear |
| Power Supply |
100-240 V AC, 50/60 Hz |
| Power Consumption |
297 W (0.47 W in Eco standby mode*3, 8.6 W in Network standby mode.) |
| dimensions (W x H x D) |
13.7" x 4.1" x 9.7" (with legs at shortest position, not including protruding parts) |
| Weight |
Approximately 6.59 lbs |
| Operating Temperature |
5°C-35°C (41°F-95°F) |
| Operating Humidity |
20%-80% (no condensation) |
| Supplied Accessories |
Power cord x 1, wireless remote control unit, batteries (AAA/R03/LR03 type x 2), VGA cable x 1, filter cover, Software CD-ROM (Logo Transfer Software, Multi Projector Monitoring & Control Software) |
|
|
|
