|
Excellent Performance and Flexibility in a Compact Body
The PT-SW280A Series are stylish, compact projectors
for corporate users. They provide the ideal level of brightness for use in brightly lit places. They also offer wireless option* and other excellent
functions.
• A4-file size and approx. 2.3 kg body
• Clear images in bright places
• Projects in various locations
• Easy projection from a
Wireless devices
* The optional ET-WML100E Wireless Module is required. |
| Power supply |
AC100-240 V 50 Hz/60 Hz |
| Power consumption |
295 W (0.5 W when STANDBY MODE set to ECO, 8W when STANDBY MODE set to Normal.) |
| LCD panel |
Panel size |
15.0 mm (0.59 inches) diagonal (16:10 aspect ratio) |
| Display method |
Transparent LCD panel (x 3, R/G/B) |
| Drive method |
Active matrix |
| Pixels |
1,024,000 (1,280 x 800) pixels |
| Lens |
Manual zoom (1.2 x), Manual focus lens, F=1.65–1.93, f=18.53–22.18 mm, Throw Ratio: 1.4–1.7:1 |
| Lamp |
230 W UHM lamp
Lamp replacement cycle*1 (lamp control: Normal/Eco): 4000 h/5000 h |
| Screen size |
0.84–7.62 m (33–300 inches) diagonally |
Brightness*2
(Lamp control: Normal) |
2,800 lm |
| Center-to-corner uniformity*2 |
80 % |
| Contrast*2 |
2,000:1 (Lamp control: Normal, Image mode: Dynamic, Auto Powersave: Off) |
| Resolution |
1,280 x 800 pixels*4 |
| Scanning frequency |
HDMI IN |
525i (480i)*5, 625i (576i)*5, 525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p,
1125 (1080)/24p, 1125 (1080)/24sF, 1125
(1080)/60i, 1125 (1080)/50i, 1125 (1080)/25p,
1125 (1080)/30p, 1125 (1080)/60p, 1125 (1080)/50p
Dot clock: 25–162 MHz (640 x 400 pixels to 1920 x 1200 pixels) |
| RGB |
fH: 15–91 kHz, fV: 24–85 Hz, dot clock: 162 MHz or lower |
| YPBPR (YCBCR) |
fH: 15.7 kHz, f V: 59.9 Hz [525i (480i)],
fH: 15.6 kHz, f V: 50.0 Hz [625i (576i)],
fH: 31.5 kHz, f V: 59.9 Hz [525p (480p)],
fH: 31.3 kHz, f V: 50.0 Hz [625p (576p)],
fH: 45.0 kHz, f V: 60.0 Hz [750 (720)/60p],
fH: 37.5 kHz, f V: 50.0 Hz [750 (720)/50p],
fH: 33.8 kHz, f V:
60.0 Hz [1125 (1080)/60i],
fH: 28.1 kHz, f V: 50.0 Hz [1125 (1080)/50i],
fH: 28.1 kHz, f V: 25.0 Hz [1125 (1080)/25p],
fH: 27.0 kHz, f V: 24.0 Hz
[1125 (1080)/24p],
fH: 27.0 kHz, f V: 48.0 Hz [1125 (1080)/24sF],
fH: 33.8 kHz, f V: 30.0 Hz [1125 (1080)/30p],
fH: 67.5 kHz, f V: 60.0 Hz [1125 (1080)/60p],
fH: 56.3 kHz, f V: 50.0 Hz [1125 (1080)/50p] |
| Video/S-Video |
fH: 15.7 kHz, f V: 59.9 Hz [NTSC / NTSC4.43 / PAL-M / PAL60],
fH: 15.6 kHz, f V: 50.0 Hz [PAL / SECAM / PAL-N] |
Keystone
correction range |
Vertical |
±30° |
| Horizontal |
±30° |
| Installation |
Ceiling/floor, front/rear |
| Terminals |
HDMI IN |
HDMI 19-pin x 1, Deep Color, compatible with HDCP,
Audio signal: Linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz) |
| COMPUTER 1 IN |
D-sub HD 15-pin (female) x 1, compatible with RGB/YPBPR (YCBCR) /YC |
| RGB |
0.7 Vp-p, 75 ohms (SYNC IN GREEN: 1.0 Vp-p, 75 ohms),
SYNC/HD: TTL high impedance, automatic positive/negative polarity compatible,
VD: TTL high impedance, automatic positive/negative polarity compatible
(The SYNC/HD and VD terminals do not support 3 value SYNC.) |
| YPBPR |
Y: 1.0 Vp-p (including sync signal), PB/PR: 0.7 Vp-p, 75 ohms |
| Y/C |
Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms |
| VIDEO IN |
Pin jack x 1, 1.0 Vp-p, 75 ohms |
| AUDIO IN |
M3 jack x 1 |
| SERIAL IN |
D-sub 9-pin (female) x 1 For external control (RS-232C compatible) |
| VIEWER / WIRELESS |
USB type A x 1 (output DC 5 V, max.500 mA)
Memory Viewer / Wireless module (Model No.: ET-WML100E) compatible |
| Built-in speaker |
1 W (monaural) |
| Cabinet color |
Champagne gold |
| Dimensions (W x H x D) |
307 mm x 80 mm (when legs at shortest position) x 210 mm (12-3/32 x 3-5/32 x 8-1/4 inches) |
| Weight |
Approx. 2.3 kg (5.1 lbs) |
| Operating temperature |
0 °C (32 °F) to 40 °C (104 °F) (Elevation: below 1,400 m (4,593 ft);
When the ambient operating temperature is 35–40 °C (95–104 °F),
[Lamp Power] will switch automatically to [Eco mode].)
0 °C (32 °F) to 35 °C (95 °F) (Elevation: 1,400 m (4,593 ft)–2,700 m (8,858 ft)) |
| Operating humidity |
20-80 % (no condensation) |
| Supplied accessories |
Wireless remote control unit (x 1), Power cord (x 2),
Power cord safety hook,
CD-ROM (x 1) ··· Logo Transfer Software,
Batteries for remote control (R03/LR03/AAA type battery (x 2)),
RGB signal cable (x 1) |
*1 This value is calculated by continuously turning the lamp on for 3.5 hours and off for 0.5 hours.
*2
Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*3 Input signals that exceed this resolution
will be converted to 1,024 x 768 pixels.
*4 Input signals that exceed this resolution will be converted to 1,280 x 800 pixels.
*5 Pixel-Repetition signal (dot clock frequency 27.0 MHz) only |
|
|
