|
Taking Laser Projection to a whole new level
The 12,000 lm PT-RS11K 3-Chip DLP™ Series projectors combine class-leading imaging with the practical
advantages of Panasonic SOLID SHINE Laser
technology: minimal picture quality degradation over long periods in continuous use, 20,000-hour maintenance-free operation*, flexible installation, failsafe
reliability,
and a wealth of powerful features for creative visual presentations in large spaces.
* At this time the brightness will
have decreased to approximately half of its original level (Dynamic Contrast Mode: 3, Image Mode: Dynamic).
Usage environment affects light source
lifespan. Panasonic recommends cleaning or replacing at point of purchase after approximately 20,000 hours. Light source lifetime may be reduced depending on
environmental conditions. Replacement of parts other than the light source may be required in a shorter period. |
| Power supply |
100-240 V AC, 50/60 Hz |
| Power consumption*1 |
1,200 W (1,280 VA), (Average power consumption:
800 W with OPERATING MODE set to NORMAL,
680 W with OPERATING MODE set to ECO,
620 W with OPERATING MODE set to LONG LIFE 1,
590 W with OPERATING MODE set to LONG LIFE 2,
550 W with OPERATING MODE set to LONG LIFE 3)
(0.3 W with STANDBY MODE set to ECO,*2 4 W with STANDBY MODE set to NORMAL.) |
| DLP™ chip |
Panel size |
24.1 mm (0.95 in) diagonal (4:3 aspect ratio) |
| Display method |
DLP™ chip x 3, DLP™ projection system |
| Pixels |
1,470,000 (1,400 x 1,050) x 3, total of 4,410,000 pixels |
| Refresh Rate |
120 Hz*3 |
| Lens |
Optional powered zoom and fixed-focus lenses |
| Light source |
Laser diode (laser class: class 1), Light source life*4:
20,000 hours (Normal Mode) / 24,000 hours (Eco Mode) |
| Screen size (diagonal) |
1.78-25.4 m (70-1,000 in), 1.78-15.24 m (70-600 in) with the ET-D75LE8,
3.05-15.24 m (120-600 in) with the ET-D75LE90, 4:3 aspect
ratio |
| Brightness*5 |
12,000 lm |
| Center-to-corner uniformity*5 |
90 % |
| Contrast*5 |
20,000:1 (full on/off, with Dynamic Contrast Mode set to “3” ) |
| Resolution |
1,400 x 1,050 pixels*6 |
Scanning
frequency |
SDI |
SD-SDI |
SMPTE ST 259 compliant, [(YCBCR) 4:2:2 10-bit] 480i, 576i |
| HD-SDI |
SMPTE ST 292 compliant,
[YPBPR 4:2:2 10-bit] 720/50p, 720/60p, 1035/60i, 1080/50i,
1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p |
Dual-link
HD-SDI |
SMPTE ST 372 compliant,
[RGB 4:4:4 12-bit /10-bit]
1080/50i, 1080/60i, 1080/25p,
1080/24p, 1080/24sF, 1080/30p, 2048 x 1080/24p, 2048 x 1080/24sF
[X´Y´Z´ 4:4:4 12-bit] 2048 x 1080/24p, 2048 x 1080/24sF |
| 3G-SDI |
SMPTE ST 424 compliant,
[YPBPR 4:2:2 10-bit] 1080/50p, 1080/60p,
[RGB 4:4:4 12-bit /10-bit] 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p |
Dual-link
3G-SDI |
SMPTE ST 425 compliant,
[YPBPR 4:4:4 12-bit / 10-bit] 1080/60p, 1080/50p, 2048 x 1080/60p,
2048 x 1080/50p, 2048 x
1080/48p,
[RGB 4:4:4 12-bit/10-bit] 1080/60p, 1080/50p, 2048 x 1080/60p, 2048 x 1080/50p, 2048 x 1080/48p |
HDMI/
DVI-D/
DIGITAL LINK |
525i (480i)*7, 625i (576i)*7, 525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p,
1125 (1080)/24p, 1125 (1080)/24sF, 1125
(1080)/25p, 1125 (1080)/30p, 1125 (1080)/60p,
1125 (1080)/50p, 1125 (1080)/60i, 1125 (1080)/50i, VGA (640 x 480)-WUXGA*8 (1920 x 1200),
compatible with non-interlaced signals only, dot clock: 25-162 MHz |
| RGB |
fH: 15-100 kHz, fV: 24-120 Hz, dot clock: 162 MHz or lower |
| YPBPR (YCBCR) |
fH: 15.73 kHz, fV: 59.94 Hz [480i (525i)],
fH: 31.47 kHz, fV: 59.94 Hz [480p (525p)],
fH: 45.00 kHz, fV: 60
Hz [720 (750)/60p],
fH: 33.75 kHz, fV: 60 Hz [1035/60i]
fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i],
fH: 27.00 kHz, fV: 48 Hz [1080 (1125)/24sF],
fH:
33.75 kHz, fV: 30 Hz [1080 (1125)/30p],
fH: 56.25 kHz, fV: 50 Hz [1080 (1125)/50p]fH: 15.63 kHz, fV: 50 Hz [576i (625i)],
fH: 31.25 kHz, fV: 50 Hz
[576p (625p)],
fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p],
fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i],
fH: 27.00 kHz, fV: 24 Hz [1080 (1125)/24p],
fH:
28.13 kHz, fV: 25 Hz [1080 (1125)/25p],
fH: 67.50 kHz, fV: 60 Hz [1080 (1125)/60p], |
| Video/Y/C |
fH: 15.73 kHz, fV: 59.94 Hz [NTSC/NTSC4.43/PAL-M/PAL60],
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM] |
Optical axis shift*9
(from center of screen) |
Vertical |
±50 % (±40 % with the ET-D75LE6, +71 % (fixed) with the ET-D75LE90) (powered) |
| Horizontal |
±30 % (±20 % with the ET-D75LE6, ±0 % (non-movable) with the ET-D75LE90) (powered) |
| Keystone correction range |
Vertical : ±40° (±22° with the ET-D75LE50, ±28° with the ET-D75LE6, +5° with the ET-D75LE90), horizontal: ±15° (0° with the ET-D75LE90) |
Keystone correction range
with optional Upgrade Kit*10 |
Vertical: ±45° (±40° with the ET-D75LE10/ET-D75LE20,
±22° with the ET-D75LE50, ±28° with the ET-D75LE6, +5° with the ET-D75LE90),
horizontal: ±40° (±15° with the ET-D75LE50/ET-D75LE6, 0° with the ET-D75LE90) |
| Installation |
Ceiling/floor, front /rear, free 360-degree installation |
| Terminals |
SDI 1 IN |
BNC x 1 (3G/HD/SD-SDI input, Dual-link HD-SDI (LINK-A), Dual-link 3G-SDI (LINK 1)) |
| SDI 2 IN |
BNC x 1 (3G/HD/SD-SDI input, Dual-link HD-SDI (LINK-B), Dual-link 3G-SDI (LINK 2)) |
| HDMI IN |
HDMI 19-pin x 1 (Deep Color, compatible with HDCP) |
| DVI-D IN |
DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only) |
| RGB 1 IN |
BNC x 5 (RGB/YPBPR/(YCBCR)/VIDEO/YC x 1) |
| RGB 2 IN |
D-Sub HD 15-pin (female) x 1 (RGB/YPBPR/(YCBCR) x 1) |
| 3D SYNC IN/OUT |
BNC x 1 (3D timing signal) |
| 3D SYNC OUT |
BNC x 1 (3D timing signal) |
| SERIAL IN |
D-sub 9-pin (female) x 1 for external control (RS-232C compliant) |
| SERIAL OUT |
D-sub 9-pin (male) x 1 for link control |
| REMOTE 1 IN |
M3 x 1 for wired remote control |
| REMOTE 1 OUT |
M3 x 1 for link control (for wired remote control) |
| REMOTE 2 IN |
D-sub 9-pin (female) x 1 for external control (parallel) |
| LAN/DIGITAL LINK |
RJ-45 x 1 (for network, DIGITAL LINK connection, 100Base-TX,
compatible with Art-Net, PJLink™ (class 1), Deep Color, HDCP) |
| Cabinet materials |
Molded plastic |
| Dimensions (W x H x D) |
578 x 270 x 725 mm (22-3/4 x 10-5/8 x 28-17/32 in)
(optional lens, legs and lens cover not included),
578 x 323.5 x 740 mm (22-3/4 x 12-23/32 x 29-1/8 in)
(Including legs at shortest position and protruding parts) |
| Weight*11 |
Approx. 44.0 kg (97 lbs) (optional lens not included) |
| Operation noise*5 |
43 dB |
| Operating environment |
Operating temperature: 0-50°C (32-122°F)*12,
operating humidity: 10- 80 % (no condensation) |
| Applicable software |
Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software,
Geometry Manager Pro (ET-UK20 Upgrade Kit and ET-CUK10*13 Auto Screen Adjustment Kit) |
| Supplied accessories |
Power cord with secure lock, wireless/wired remote control unit, batteries (R6/AA type x 2),
software CD-ROM (Logo Transfer Software, Multi Monitoring & Control Software) |
*1 Operating Temperature: 25 °C (77 °F), Altitude: 700 m (22 ft 12 in), ICE627087: 2008 Broadcast contents, Image
Mode: Dynamic, Dynamic Contrast Mode: 3.
*2 When Standby Mode is set to Eco, network functions such as power on over LAN will not operate.
Additionally,
only certain commands can be received for external control using the serial terminal.
*3 Refresh rate varies depending on scanning frequency.
*4 At
this time the brightness will have decreased to approximately half of its original level.
Operating Temperature: 35 °C (95 °F), Altitude 700 m (22 ft
12 in), Dust: 0.15 mg/m3.
*5 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*6 Input signals
that exceed the native resolution will be converted to the native resolution.
*7 Pixel-repetition signal (dot clock frequency: 27.0 MHz) only.
*8 WUXGA
resolution is supported only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking).
*9 Optical axis shift is not
supported on the ET-D75LE50.
*10 Up to a total of ±55° during simultaneous horizontal and vertical correction.
*11 Average value. May differ depending
on the actual unit.
*12 When operational mode is set to Normal, operating temperature is from 0 °C (32 °F) to 50 °C (122 °F), and operating temperature is
from 0 °C (32 °F) to 45 °C
(113 °F) when used in locations from 1,400 m to 4,200 m (4,593 ft to 13,780 ft) above sea level. When operational mode is set to
Eco or Long Life 1/2/3, operating temperature is from 0 °C (32 °F) to 45 °C (113 °F). When used with Smoke Cut Filter, operating temperature is from 0 °C (32 °F)
to 40 °C (104 °F). Projector cannot be used in locations over 2,700 m (8,858 ft) with operational mode set to Eco or Long Life 1/2/3. When used with Smoke Cut
Filter, the projector cannot be used in locations over 1,400 m (4,593 ft). Light source brightness may decrease depending on operating temperature. When
projector is operating at high temperature, brightness will decrease correspondingly.
*13 Available worldwide except in the United States.
NOTES ON USE
1. Do not install the projector in locations that are subject to excessive water, humidity, steam, or
oily smoke. Doing so may result in fire, malfunction, or electric shock.
2. Please observe the following precautions:
• Never place objects on top of the
projector while it is in operation.
• Make sure there is an unobstructed space of 500 mm (1 ft 8 in) or more around the projector’s exhaust openings.
• Do not stack projector units directly on top of one another for the purpose of multiple (stacked) projection.
When stacking projector units, be sure to
provide the amount of space indicated below between them.
These space requirements also apply to installations where only one projector unit is
operating at one time and the other unit is used as a backup.
• Make sure that nothing blocks the projector’s air intake and exhaust openings.
Also,
install the projector so that cool or hot air from other air conditioning equipment does not flow directly toward the projector’s air intake or exhaust
openings.
• Do not install the projector in an enclosed space. If it is necessary to install it in an enclosed space, add a separate ventilation system.
If ventilation is insufficient, hot air will accumulate at the intake opening. This may cause the projector’s protective circuit to interrupt projector
operation.
• If the projector is placed in a box or enclosure, ensure the projector’s intake and exhaust openings are not blocked.
Take particular
care to ensure that hot air from the exhaust openings is not sucked into the intake.
3. Because the ET-D75LE50 is a fixed short-throw lens, the lens shift function cannot be used with it. |
|
|
