7% Goods Service Tax (GST) will be imposed over the total invoice value if purchased locally in Singapore. However if you are a tourist visiting Singapore, this GST amount can be
refunded at the Changi International Airport Departure Hall / Seletar Airport Passenger Terminal / Marina Bay Cruise Centre Singapore/ International Passenger Terminal at Harbourfront Centre
GST Refund Centre before departure with goods within 2 months from the date of purchase. Please note that only Tourists who have met the Tourist Refund Scheme's conditions and eligibility criteria can
claim for the GST refund. Please visit: https://www.iras.gov.sg/IRASHome/GST/Consumers/Tourist-Refund-Scheme/
for GST Guide for Visitors on Tourist Refund Scheme. |
|
Product Code: PT-DS12K
 |
The PT-DS12K Series of 3-Chip DLP projectors combine high levels of picture quality, reliability, function and
system expandability into a compact body. Packed with original, advanced Panasonic technology, these projectors supply the flexibility to meet a wide range of applications. |
|
• A compact body with 12,000 lm* of brightness and high picture quality.
• A maximum 2,500-hour lamp replacement cycle and a low power
consumption of 1,000 W supports the total cost of ownership (TCO).
• Active 3D projection capability
• Optional upgrade kit (ET-UK20) featuring new Geometry
Manager Pro for specially shaped screens is available
• Portrait mode capability (requires the optional ET-LAD320P or ET-LAD320PW lamp units and updating the projector's firmware to MAIN Ver. 2.00 or later). |
| DLP™ chip |
Panel size |
24.1 mm (0.95 in)
diagonal (4:3 aspect ratio) |
| Display method |
DLP™ chip x 3, DLP™ projection system |
| Pixels |
1,470,000 (1,400 x 1,050) x 3,
total of 4,410,000 pixels |
| Lamp |
380 W UHM lamps (HIGH mode) x 2 |
| Brightness*1 |
12,000 lm*3 (dual-lamp) |
| Contrast ratio*1 |
10,000:1 (full on/off, with DYNAMIC IRIS set to "3") |
| Screen size (diagonal) |
1.78 -25.4 m (70-1,000 in),
1.78 -15.24 m (70-600 in)
with the ET-D75LE8, 4:3 aspect ratio |
| Center-to-corner uniformity*2 |
90 % |
| Resolution |
1,400 x 1,050 pixels
(Input signals that exceed this resolution will
be converted to 1,400 x 1,050 pixels.) |
| Optical axis shift |
Vertical: ±50 % (±40 % with the ET-D75LE6) from center of screen
(powered)
Horizontal: ±30 % (±20 % with the ET-D75LE6) from center of screen (powered) |
| Scanning frequency |
SDI |
Dual-link
HD-SDI |
SMPTE ST 372 compliant,
[RGB 4:4:4 12-bit /10-bit] 1080/50i, 1080/60i, 1080/25p, 1080/24p,
1080/24sF, 1080/30p,
[X´Y´Z´ 4:4:4 12-bit] 2,048 x 1,080/24p, 2,048 x 1,080/24sF |
| 3G-SDI |
SMPTE ST 424 compliant,
[RGB 4:4:4 12-bit /10-bit] 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p
[YPBPR 4:2:2 10-bit] 1080/50p, 1080/60p, |
| HD-SDI |
SMPTE ST 292 compliant,
[YCBCR 4:2:2 10-bit] 720/50p, 720/60p, 1035/60i, 1080/50i,
1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p |
| SD-SDI |
SMPTE ST 259 compliant, [YCBCR 4:2:2 10-bit] 480i, 576i |
| HDMI/DVI-D |
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p,
1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p,
VGA (640 x 480)-WUXGA*4 (1,920 x 1,200),
compatible with non-interlaced signals only, dot clock: 25-162
MHz |
| RGB |
fH: 15-100 kHz, fV: 24-120 Hz, dot clock: 20-162 MHz |
| YPBPR (YCBCR) |
fH: 15.75 kHz, fV: 60 Hz [480i(525i)]
fH: 15.63 kHz, fV: 50 Hz [576i(625i)]
fH: 45.00 kHz, fV: 60 Hz [720(750)/60p]
fH: 33.75 kHz, fV: 60 Hz [1035/60i]
fH: 28.13 kHz, fV: 50 Hz [1080(1125)/50i]
fH: 27.00 kHz, fV: 24 Hz [1080/24p]
fH: 33.75 kHz, fV: 30 Hz [1080/30p]
fH: 56.25 kHz, fV: 50 Hz [1080/50p] |
fH: 31.50 kHz, fV: 60 Hz [480p(525p)]
fH: 31.25 kHz, fV: 50 Hz [576p(625p)]
fH: 37.50 kHz, fV: 50 Hz [720(750)/50p]
fH: 33.75 kHz, fV: 60 Hz [1080(1125)/60i]
fH: 28.13 kHz, fV: 25 Hz [1080/25p]
fH: 27.00 kHz, fV: 48 Hz [1080/24sF]
fH: 67.50 kHz, fV: 60 Hz [1080/60p] |
| Video/Y/C |
fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60],
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM] |
| Terminals |
SDI 1 IN |
BNC x 1 (3G/HD/SD-SDI) |
| SDI 2 IN |
BNC x 1 (HD/SD-SDI) |
| 3D SYNC IN/OUT |
BNC x 1 (3D timing signal) |
| 3D SYNC OUT |
BNC x 1 (3D timing signal) |
| DVI-D IN |
DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only) |
| HDMI IN |
HDMI 19-pin x 1 (Deep Color, compatible with HDCP) |
| RGB 1 IN |
BNC x 5 (RGB/YPBPR/YCBCR/YC x 1) |
| RGB 2 IN |
D-Sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1) |
| VIDEO IN |
BNC x 1 (composite video) |
| SERIAL IN |
D-sub 9-pin (female) x 1 for external control (RS-232C compliant) |
| SERIAL OUT |
D-sub 9-pin (male) x 1 for link control |
| REMOTE 1 IN |
M3 x 1 for wired remote control |
| REMOTE 1 OUT |
M3 x 1 for link control (for wired remote control) |
| REMOTE 2 IN |
D-sub 9-pin (female) x 1 for external control (parallel) |
| LAN |
RJ-45 x 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™) |
| Keystone correction range |
Vertical: ±40°*6, horizontal: ±15° |
Keystone correction range with
optional Upgrade Kit ET-UK20 |
Vertical ±40° and horizontal ±40° with the ET-D75LE1/LE2/LE10/LE20,
vertical ±45° and horizontal ±40° with the
ET-D75LE3/LE4/LE30/LE40,
vertical ±22° and horizontal ±15° with the ET-D75LE5/LE50,
vertical ±28° and horizontal ±15° with the ET-D75LE6 |
| Installation |
Ceiling/floor, front /rear, portrait*7 |
| Cabinet materials |
Molded plastic |
| Power supply |
120 V, 220-240 V AC, 50/60 Hz |
| Power consumption |
120 V AC |
980 W (1,010 VA) |
(0.2 W with standby mode set to eco.*1
6 W with standby mode set to normal. Both with fan stopped.) |
| 220-240 V AC |
950 W (980 VA) |
(0.3 W with standby mode set to eco.*1
9 W with standby mode set to normal. Both with fan stopped.) |
| Dissipation BTU |
120 V: 3,345 BTU/hour
(without light output: 3,181 BTU/hour).
220-240 V: 3,242 BTU/hour
(without light output: 3,079 BTU/hour) |
| Dimensions (W x H x D) |
530 x 200*8 x 548.5 mm (20-7/8 x 7-7/8*8 x 21-19/32 in) (optional lens not included) |
| Weight |
Approximately 24 kg (52.9 lbs) (optional lens not included) |
| Operating Environment |
Operating temperature: 0-45°C (32-113°F)*10,
operating humidity: 10-80 % (no condensation) |
| Operation noise |
45 dB (dual lamp operation with lamp HIGH mode),
43 dB (dual lamp operation with lamp MIDDLE mode),
37 dB (dual lamp operation with lamp ECO mode) |
| Applicable software |
Logo Transfer Software, Multi Projector Monitoring & Control Software,
Geometry Manager Pro (included in the ET-UK20) |
| Supplied accessories |
Power cord with secure lock, wireless/wired remote control unit, batteries (R6/AA type x 2) |
|
|
|
| |
|
|
|
