|
The PT-EX12K LCD projector, featuring 13,000 lumens of brightness XGA resolution, is ideal for houses of worship, rental and staging and end-users seeking high brightness large
venue projection. The projector is equipped with a dual-lamp optical system ensures operation and is encased in a ruggedized chassis for high reliability and durability. A Pure Color Control
device which independently controls yellow brightness to improve color reproduction, attains this superb brightness with optimal coloring. System expansion functions include horizontal/vertical
lens shift and a Multi-Screen Support System. These and other features enable flexible installation for a wide variety of applications.
The PT-EX12K incorporates two 380W lamps that deliver a remarkable
13,000 lumens and its high 4000:1 contrast ratio makes possible clear, sharp and crisp images. The image quality is also supported by the Pure Color Control function and full 10-bit image processing
system. The Pure Color Control function independently controls the light intensity of yellow coloring. This provides rich overall color expression while maintaining brightness realizing images that
are true to life. Not only is the projector capable of projecting sharp and crisp large-screen images, but it is also reliable for long-time use. The PT-EX12KU contains LCD panels with inorganic
alignment layers and polarizers to add durability and it is designed with the Eco Filter which minimizes the need for filter maintenance for up to 12,000 hours. |
• High brightness of 13,000 lm and 4,000:1 contrast produce sharp and crisp images.
• A Pure Color Control function attain color reproduction
while maintaining brightness.
• The 2-Lamp optical system enables stable, extended operation.
• The original Eco Filter efficiently captures dust and
requires no replacement for up to 12,000 hours.
• Horizontal/vertical lens shift, a variety of optional lenses, and 360º angle setting ensure flexible installation. |
| Power supply |
100-240 V AC, 50/60 Hz |
| Power consumption |
940 W (17 W with standby mode) |
| LCD panel |
Panel size |
46 mm (1.8 inches) diagonal (4:3 aspect ratio) |
| Display method |
Transparent LCD panel (x 3, R/G/B) |
| Pixels |
786,432 (1,024 x 768) x 3, total of 2,359,296 pixels |
| Pixel configuration |
Stripe |
| Pure color control device |
1 |
| Lamp |
380 W x 2, lamp replacement cycle
(lamp power: Normal/Eco1, Eco2):
2,000 hours/3,000 hours*1 |
| Lens |
Optional |
| Screen size (diagonal) |
1.02-15.24 m (40-600 inches) (2.54-15.24 m [100-600 inches] with the ET-ELS03),
4:3 aspect ratio |
| Brightness*2 |
13,000 lm (2-lamps, lamp power: Auto/Normal, Optional lens: ET-ELS03) |
| Center-to-corner uniformity*2 |
90 % |
| Contrast*2 |
4,000:1
(full on/full off, 2-lamps, lamp power: Auto) |
| Resolution |
1,024 x 768 pixels
(Input signals that exceed this resolution will be converted to 1,024 x 768 pixels.) |
| Scanning Frequency |
HDMI/DVI-D |
Horizontal: 26-80 kHz, vertical: 23-85 Hz, dot clock: 162 MHz or lower |
| RGB (analog) |
fH: 15-120 kHz, fV: 48-120 Hz, dot clock: 230 MHz or lower
(Signals exceeding the dot clock rate of 165 MHz are downsampled.) |
| YPBPR (YCBCR) |
fH: 15.75 kHz, fV: 60 Hz [480i (525i)]
fH: 31.50 kHz, fV: 60 Hz [480p (525p)]
fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p]
fH: 33.75 kHz, fV: 60 Hz [1035/60i]
fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i]
fH: 28.13 kHz, fV: 50 Hz [1080/25sF]
fH: 27.00 kHz, fV: 48 Hz [1080/24sF]
fH: 33.75 kHz, fV: 60 Hz [1080/30sF]
fH: 56.25 kHz, fV: 50 Hz [1080/50p] |
fH: 15.63 kHz, fV: 50 Hz [576i (625i)]
fH: 31.25 kHz, fV: 50 Hz [576p (625p)]
fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p]
fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i]
fH: 28.13 kHz, fV: 25 Hz [1080/25p]
fH: 27.00 kHz, fV: 24 Hz [1080/24p]
fH: 33.75 kHz, fV: 30 Hz [1080/30p]
fH: 67.50 kHz, fV: 60 Hz [1080/60p] |
| Video/S-Video |
fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60],
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM] |
| Optical axis shift |
With the ET-ELW06: vertical ±39% from center of screen (powered)*3
With the ET-ELW02/ELW04/ELS03/ELM01/ELT02/ELT03: vertical
±39%, horizontal ±10% from center of screen (powered)
With the ET-ELS02: vertical ±50%, horizontal ±10% from
center of screen (powered)
With the ET-ELW03: the optical lens shift function cannot be used. |
| Keystone correction range |
Vertical: Maximum ±40°, Horizontal: Maximum ±40°
(with XGA signal input, for vertical/horizontal correction only, Optional lens: ET-ELS03) |
| Installation |
Ceiling/floor, front/rear |
| Terminals |
INPUT1 |
DVI-D IN |
DVI-D 24-pin x 1
(DVI 1.0 compliant, compatible with HDCP, compatible with single link only), 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i,
1035/60i, 1080/24p, 1080/24sF, 1080/25p, 1080/25sF, 1080/30p, 1080/30sF, 1080/60p, 1080/50p, VGA (640 x 480)-WUXGA (1,920 x 1,200)*4,
compatible with non-interlaced signals only, dot clock: 25-162 MHz |
| HDMI IN |
HDMI 19-pin x 1
(compatible with HDCP, compatible with Deep Color), 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1035/60i, 1080/24p,
1080/24sF, 1080/25p, 1080/25sF, 1080/30p, 1080/30sF, 1080/60p, 1080/50p, VGA (640 x 480)-WUXGA (1,920 x 1,200)*4,
compatible with non-interlaced signals only, dot clock: 25-162 MHz |
| ANALOG IN |
D-sub HD 15-pin (female) x 1 (RGB x 1) |
| INPUT2 |
RGB 5BNC IN /
VIDEO IN |
BNC x 5 (RGB/YPBPR/YCBCR x 1), shared with VIDEO IN (BNC x 1) (composite video) |
| S-VIDEO IN |
Mini DIN 4-pin x 1 (S-Video) |
| INPUT3/INPUT4 |
Optional interface board slot, When the ET-MD16SD1 is installed,
SERIAL IN (SDI IN 1/2): BNC x 2 (SD-SDI signal/single link HD-SDI
signal)
SD-SDI signal (YCBCR 4:2:2 10-BIT): 480i, 576i (SMPTE 259M-C compliant)
Single-link HD-SDI signal (YPBPR 4:2:2 10-BIT): 720/50p, 720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/25p, 1080/25sF, 1080/24p,
1080/24sF, 1080/30p, 1080/30sF (SMPTE 292M compliant)
SERIAL OUT (SDI OUT): BNC x 1 (active through)
|
| SERIAL IN |
D-sub 9-pin (female) x 1
for external control |
| SERIAL OUT |
D-sub 9-pin (male) x 1 for link control |
| REMOTE IN |
M3 Jack x 1 (for wired remote control) |
| LAN |
RJ-45 x 1 (for network connection, 100Base-TX/10Base-T,
compliant with PJLink™ [class1]) |
| USB |
USB type-B (USB connector) x 1*5 |
| Cabinet materials |
Molded plastic |
| Dimensions (W x H x D) |
538.5 x 268 x 757 mm
(21.2" x 10.6" x 29.8")
(with legs at shortest position, optional lens not included) |
| Weight |
Approximately 28 kg (61.7 lbs)
(optional lens not included) |
| Noise level |
42 dB (lamp power: Normal/Eco2),
39 dB (lamp power: Eco1) |
| Operating temperature |
0°C- 40°C [32°F-104°F] (less than 1,400 m [4,593 ft] above sea level),
0°C- 30°C [32°F-86°F] (between 1,400 m and 2,700 m [4,593 ft to 8,858 ft] above sea level) |
| Operating humidity |
20-80 % (no condensation) |
| Supplied accessories |
Power cord x 1 (x 2 for PT-EX16KE/EX12KE), power cord holder/power cord cover x 1set, wireless/wired remote control unit,
batteries (AAA/R03/LR03 type x 2), VGA cable x 1,
software CD-ROM (Logo Transfer Software, Multi Projector Monitoring & Control Software, Real Color Manager Pro.), lens attachment x
1set, lens lock lever fixing bracket x 1set, lightshielding plate x 3set, spacer x 1set, cable tie x 3 |
|
|
|
