|
|
| 2-Channel Stereo Split Ear
Beltpack (uses 6-pin XLR) |
|
|
The RS-622 is a
2-channel stereo split-ear beltpack with a 6-pin male headset
connector and a 6-pin female intercom line connector. It requires a
YC-36 adapter to connect with standard 3-pin cablin, 2.5mm AUX
headset connector and an RS-232 data connector for programming.
The beltpack can be programmed using the V-pack software, which
does not require beltpack to be opened or any dip switches changed,
etc.
|
Product Code: RS622
|
|
| Technical Details |
Technical
Specification
General
Amplifier Design: I.C. amplifiers, including solid-state digital
switching and signaling circuits. Current-limited and short-circuit
protected.
Signal to Noise: >75 dB
Bridging Impedance: >15k
Line Level: -14 dB, +5 dB max.
Sidetone Adjust: >35 dB
EMI and RFI rejection: >60 dB
Microphone Pre-Amplifier
Headset Mic Impedance: 200 Ω
Gain, mic to line: 41 dB (dynamic)
Limiter Range: 26 dB
Frequency Response: 200 Hz – 12 kHz contoured for
intelligibility
Headphone Amplifier
Load Impedance: 50 - 2,000 Ω
Output Level: +17 dBv before clipping
Distortion: <0.1% THD @ 1 kHz
Gain, line to output: +34 dB
Frequency Response: 100 Hz - 18 kHz, ±2dB
Program Input
Program input : Balanced, transformer isolated
Input sensitivity: –20 dBv to +10 dBv
Frequency response: 50 Hz – 18 Hz, ± 2 dB
Connectors
Intercom Line: (1) 6-pin XLR-F
Headset:: 6-pin XLR–M
Power Requirements
DC Voltage Range: 12-32 volts
Environmental
0˚C - 70˚C (32˚F - 158˚F)
0 - 90% relative humidity
Dimensions
4.58 in. H x 3.73 in. W x 1.34 in. D
(116 x 95 x 34 mm)
Weight
7.8 oz. (0.22 kg) |
|
|
