|
|
| Optocore Fiber
and CAT5 Interfaces |
|
|
V3R-FX-INTERCOM and
X6R-FX-INTERCOM 1RU interfaces from Optocore provide 4 and 8 port
fiber respectively or CAT5 “SANE” ring connectivity
allowing intercom to travel over the Optocore Audio network. These
units also provide solutions for fiber muxing remote panels and
interfaces to and from the Eclipse matrix. As part of a greater
Optocore audio network they can also feed and receive program and
IFB audio around the ring. The Optocore units also provide a
redundant LAN for IP panels and/or PC Management from anywhere on
the ring.
OPTOCORE FOR REAL-TIME SIGNAL ROUTING
The V3R-FX-INTERCOM FOR CLEARCOM and X6R-FX-INTERCOM FOR CLEAR-COM
devices provide high bandwidth routing capabilities for each
intercom port, at a rate of 2Gbit/s of data for up to 1024
audio/intercom input channels and various types of analog or
digital audio interfaces. IP-based Clear-Com systems can be
tunneled through Optocore with the use of LAN ports of each
device.
OPTOCORE AS A MATRIX AND FIBER BACKBONE
Optocore can work as a digital audio router and fiber backbone for
the Clear-Com system, offering both dual fiber ring redundancy and
CAT5 based SANE audio network.
OPTOCORE INTEGRATES CLEAR-COM SYSTEMS
The Optocore interfaces can fully integrate Clear-Com matrix
intercom systems to Optocore. It is possible to output each single
intercom channel at every Optocore interface, and use the analog
4-wire, AES/EBU or MADI output devices to distribute the
communication. The X6R-FX-INTERCOM is equipped with eight intercom
I/O’s and the V3RFX-INTERCOM with four. It is possible to run
the intercom communication over an Optocore system and send an
analog output or console mix-minus to an intercom IFB using for
example the DD2FR-FX MADI interface.
Features
-
Purpose-Designed for Professional
Productions: High signal
integrity and guaranteed quality of service (QoS).
-
Ultra
Low Latency: Unique synchronous
design delivers a fixed at 41.6 μs from any point in the
network to any other point, regardless of the number of nodes on
the network.
-
High
Reliability: Fiber and CAT5 ring
redundancy together with automatic Word Clock negotiation and dual
power supplies provide a reliable and futureproof
solution.
-
High
Bandwidth: 2Gbit/s data rate
supports 1024 input channels on Optocore Fiber; 64 channels in SANE
network; 32 bit audio transport.
-
Clear-Com Compatible for Ease of
Use: Built-in Clear-Com
compatible connections using standard CAT5 cables.
-
Easy
to Operate: Extensive software
control and monitoring capabilities makes it easy to supervise the
entire network, change settings, display levels, and log
events.
-
High
Scalability: Simply add devices
for new functionality or a higher channel count as production needs
grow.
|
Product Code:
FIM202D
|
THE OPTOCORE AND SANE
PLATFORMS
V3R-FX-INTERCOM and X6R-FX-INTERCOM are based on the market-proven
Optocore™ and SANE™ (Synchronous Audio Network plus
Ethernet) technology platforms. The Optocore dual, redundant
fiber-ring-based network can transport up to 1024 channels of 48
kHz sampled digital audio, or can be reallocated to route data and
video signals simultaneously with multi-directional audio. The SANE
platform is based on CAT5 cabling, which carries up to 64 channels
of very low latency digital audio and 100Mbit Ethernet.
By using a ring topology, SANE is fault tolerant like the Optocore
fiber-based solution and supports up to 24 interface nodes.
Optocore and SANE together enables the V3R-FXINTERCOM and
X6R-FX-INTERCOM devices to deliver a highly reliable, flexible and
cost effective solution for broadcast and live performance
productions. The devices seamlessly integrate intelligent intercom
systems—for a production of any size and across any number of
locations—with the other analog or digital audio, data and/or
video signals over common fully redundant fiber and CAT5
cables.
|
|
|
|
|
|
