| Extron SW USB Series Two and Four Input USB Switchers |
Product Code: SWUSBSERIES
| |
SW2 USB |
|
Two Input USB |
 |
| |
SW4 USB |
|
Four Input USB
|
|
| |
SW4 USB Plus |
|
Four Input USB with Emulation |
|
|
The Extron SW2 USB, SW4 USB, and SW4 USB Plus
are two- and four-input USB switchers that allow switching between multiple host
devices and multiple USB peripherals. They provide integrator-friendly solutions
for implementing USB 2.0 compatible switching in professional AV environments. A
number of specialized features help further streamline integration, such as:
port status indication, RS-232 pass-through, front panel security lockout, and
multiple control points. The SW4 USB Plus model features Host and Peripheral
Emulation Mode, which provides "keep alive" functionality by continuously
mimicking host and keyboard/mouse communications within the switcher. This
emulation eliminates the need for enumeration, and reduces the chance of failed
device communications throughout the switching process.
All of the SW USB Series switchers act as active USB hubs, supplying 5V, 500mA
to attached devices, per USB specification. In addition, the switchers are USB
2.0 compatible, and are backwards compatible with all previous USB data rate
specifications, including low speed 1.5 Mbps, full speed 12 Mbps, and hi-speed
480 Mbps. RS-232 pass-through reduces RS-232 control port requirements by
processing SIS commands within the SW USB while also passing them through to
other controllable Extron audio and video switchers. The SW USB Series
incorporates rack mountable, 1U, half-rack width enclosures for simplified
integration. All models include an external, universal power supply for
worldwide power compatibility. |
� Outputs: Four female USB type A
connectors
� USB 2.0 compatible � Supports 480 Mbps high speed communications and is
backwards compatible with all prior USB versions.
� Four port output hub with 5V, 500mA available on each output � Allows
simultaneous connection to multiple peripheral devices such as mass storage
devices, keyboards, mice, or other HID � Human Interface Devices. Attached
devices can be powered via the provided 5V, 500mA available on each output.
� Port Status LEDs � Provides visual indication of port activity for enumerated
peripherals and all connected and active host devices.
� Multiple control points � Operation via front panel, RS-232, and contact
closure offers integration flexibility into a variety of control environments.
� RS-232 pass-through � Reduces RS-232 control port requirements by processing
SIS commands within the SW USB while also passing them through to other
controllable Extron video switchers.
� Front panel security lockout � Prevents unauthorized use in non-secure
environments. In lockout mode, a special button combination is required to
operate the switcher from the front panel.
� Rack-mountable, 1U half rack width metal enclosure
� Highly reliable, energy-efficient external universal power supply included,
replacement part # 70-775-01 � Provides worldwide power compatibility, with high
demonstrated reliability and low power consumption for reduced operating costs.
� Host and Peripheral Emulation Mode - SW4 USB Plus model � Offers increased
system reliability by emulating uninterrupted connection between host and
keyboard/mouse devices. This selectable feature enables devices to "keep alive"
when switching between inputs. |
|
USB |
|
USB specification |
USB 2.0 compatible |
|
USB data rates |
Low speed (1.5 Mbps), full speed (12
Mbps), high speed (480 Mbps) |
|
USB input |
|
Connectors |
|
|
SW2 USB |
2 female USB type B |
|
SW4 USB, SW4 USB Plus |
4 female USB type B |
|
USB output |
|
Connectors |
4 female USB type A |
|
Control/remote � switcher |
|
Serial control port |
(1) RS-232, 3.5 mm captive screw
connector, 3 pole
(1) RS-232 pass-through, 3.5 mm captive screw connector, 3 pole |
|
Baud rate and protocol |
9600 baud, 8 data bits, 1 stop bit, no
parity |
|
Serial control pin
configurations |
|
|
RS-232 |
1 = Tx, 2 = Rx, 3 = GND |
|
RS-232 pass-through |
1 = Tx, 3 = GND |
|
Contact closure |
|
|
SW2 USB |
(1) 3.5 mm captive screw connector, 3
pole |
|
SW4 USB, SW4 USB Plus |
(1) 3.5 mm captive screw connector, 5
pole |
|
Contact closure pin
configuration |
|
|
SW2 USB |
1 = input 1, 2 = input 2, 3 = GND |
|
SW4 USB, SW4 USB Plus |
1 = input 1, 2 = input 2, 3 = input 3, 4
= input 4, 5 = GND |
|
Program control |
Extron Simple Instruction Set (SISTM) |
|
General |
|
Power supply |
External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 watts |
|
Power consumption |
|
|
Device |
11 watts, 12 VDC |
|
Device and power supply |
14 watts, 100-240 VAC, 50-60 Hz |
|
Temperature/humidity |
Storage: -40 to +158 �F (-40 to +70 �C)
/ 10% to 90%, noncondensing
Operating: +32 to +122 �F (0 to +50 �C) / 10% to 90%, noncondensing |
|
Cooling |
Convection, no vents |
|
Thermal dissipation |
|
|
Device |
38 BTU/hr |
|
Device and power supply |
48 BTU/hr |
|
Mounting |
|
|
Rack mount |
Yes, with optional rack shelf |
|
Furniture mount |
Yes, with optional under-desk mounting
kit |
|
Enclosure type |
Metal |
|
Enclosure dimensions |
1.6" H x 8.6" W x 3.0" D (1U high, half
rack wide)
(4.1 cm H x 21.8 cm W x 7.6 cm D)
(Depth excludes connectors.) |
|
Product weight |
2.0 lbs (0.9 kg) |
|
Shipping weight |
3 lbs (2 kg) |
|
Vibration |
ISTA 1A in carton (International Safe
Transit Association) |
|
Regulatory compliance |
|
|
Safety |
CE, c-UL, UL |
|
EMI/EMC |
CE, C-tick, FCC Class A, ICES, VCCI |
|
Warranty |
3 years parts and labor |
| NOTE |
All nominal levels are at �10%.
|
|
| NOTE |
Specifications are subject to
change without notice. |
|
|
| |
|
|
| |
|
|
