| Extron SW DVI Plus Series DVI and Stereo Audio Switchers with
EDID Minder� |
Product Code: SWDVIPLUSSERIES
| |
SW2 DVI Plus |
|
Two Input DVI Switcher |
 |
| |
SW2 DVI A Plus |
|
Two Input DVI Switcher w/Stereo Audio
|
|
| |
SW4 DVI Plus |
|
Four Input DVI Switcher |
|
| |
SW6 DVI Plus |
|
Six Input DVI Switcher |
|
|
The Extron SW DVI Plus Series are two, four, and
eight input single link DVI switchers, available with or without stereo audio
switching. They are compatible with PC resolutions up to 1920x1200, including
HDTV 1080p/60 and 2K. They feature EDID Minder�, which maintains continuous EDID
communication with connected devices and ensures that the DVI sources power up
properly and maintain correct video output. The switchers ensure signal
integrity by equalizing and regenerating the incoming signal. The SW DVI Plus
Series switchers are ideal for applications that require the routing of multiple
DVI sources to a single display.
The SW DVI Plus Series offers integrator-friendly features, including input
cable equalization, signal regeneration, and peripheral device powering.
Selectable cable equalization for each input via front panel switches reduces
the need for additional signal conditioning equipment by compensating for signal
loss when using long input cable assemblies. DVI signals are retimed and
regenerated to eliminate noise and reduce jitter for a strong, stable digital
signal. +5 VDC, 250 mA power provided on the DVI output powers peripheral
devices such as a DVI 101 cable equalizer.
Convenient control options, including front panel, RS-232, IR, and auto-input
switching, allow for easy integration into a variety of environments. All SW DVI
Plus Series switchers are housed in rack-mountable 1U enclosures. |
�
Single link DVI-D switching
� Stereo audio switching � Select models feature stereo audio switching, and
accept unbalanced input signals and output balanced or unbalanced output
signals.
� Inputs: Two, four, or eight female DVI-I connectors for video; 3.5 mm stereo
mini jacks for audio on select models
� Outputs: One DVI-I female connector for video; captive screw connector for
audio on select models
� Supports computer video up to 1920x1200, including HDTV 1080p/60 and 2K
� EDID Minder� automatically manages EDID communication between connected
devices � EDID Minder ensures that all sources power up properly and reliably
output content for display.
� Selectable cable equalization for each input � Actively conditions incoming
DVI signals to compensate for signal loss when using long DVI cables, low
quality DVI cables, or source devices with poor DVI signal output. Equalization
is independently selectable for each input via the front panel switches.
� Retimes and reshapes marginal or noisy DVI signals � Eliminates noise and
reduces jitter from marginal DVI sources, or passive DVI couplers or wallplates
in the signal path, ensuring a strong, stable digital signal.
� Source signal presence indication � LED indicators on the front panel provide
real-time verification of signal presence for all inputs.
� Auto-input switching � Automatically switches to the highest-numbered input
with an active video signal.
� Provides +5 VDC, 250 mA power on the DVI output for external peripheral
devices
� Active audio buffering � Converts unbalanced audio signals to balanced audio
signals, eliminating noise over long cable runs.
� Front panel security lockout � Prevents unauthorized use in non-secure
environments. In lockout mode, a special button combination is required to
operate the switcher from the front panel.
� RS-232 control
� IR remote control with optional IR 102 handheld IR remote
� Rack‑mountable, 1U metal enclosure � SW DVI Plus two and four‑input models
feature a half rack width enclosure. Eight‑input model features a full rack
width enclosure.
� Highly reliable, energy‑efficient external universal power supply included,
replacement part #70‑775‑01 � Provides worldwide power compatibility, with high
demonstrated reliability and low power consumption for reduced operating costs.
Note: The SW DVI Plus Series are not HDCP compliant. |
|
NOTE |
*Appropriate DVI-D to HDMI cables or
adapters are required for HDMI signal input/output. |
|
|
NOTE |
The SW
DVI Plus Series are not HDCP compliant. |
|
|
Video |
|
Maximum data rate |
4.95 Gbps (1.65 Gbps per color) |
|
Maximum pixel clock |
165 MHz |
|
Resolution range |
Up to 1920x1200 or 1080p @ 60 Hz |
|
Formats |
RGB and YCbCr digital video |
|
Standards |
DVI 1.0, HDMI |
|
Video input |
|
Number/signal type |
2, 4, 6, or 8 single link DVI-D (or HDMI*) |
|
Connectors |
2, 4, 6, or 8 female DVI-I |
|
Equalization |
+6 dB or +12 dB, switch selectable for each input |
|
Video output |
|
Number/signal type |
1
single link DVI-D (or HDMI*) |
|
Connectors |
1
female DVI-I |
|
Audio (SW DVI A Plus models only) |
|
Gain |
Unbalanced output: 0 dB; balanced output: +6 dB |
|
Frequency response |
20 Hz to 20 kHz, �0.05 dB |
|
THD + Noise |
0.01% @ 1 kHz at nominal level |
|
S/N |
>90 dB at maximum output (unweighted) |
|
Crosstalk |
<-45 dB @ 20 kHz, -72 dB @ 1 kHz or below |
|
Stereo channel separation |
>80 dB @ 20 Hz to 20 kHz |
|
Audio input (SW DVI A Plus models only) |
|
Number/signal type |
2, 4, 6, or 8 stereo, unbalanced |
|
Connectors |
(2, 4, 6, or 8) 3.5 mm mini audio jacks (tip = L, ring = R, sleeve = GND) |
|
Impedance |
>10k ohms unbalanced, DC coupled |
|
Nominal level |
-10 dBV (316 mVrms) |
|
Maximum level |
+8.2 dBV, unbalanced at 1% THD+N |
| NOTE |
0 dBu
= 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
Audio output (SW DVI A Plus models only) |
|
Number/signal type |
1
stereo, balanced/unbalanced |
|
Connectors |
(1) 3.5 mm captive screw connector, 5-pole |
|
Impedance |
50 ohms unbalanced, 100 ohms balanced |
|
Maximum level (Hi-Z) |
>+16.5 dBu, balanced; >8.2 dBV, unbalanced at 1% THD+N |
|
Maximum level (600 ohm) |
>+10.4 dBm, balanced; >7.1 dBm, unbalanced at 1% THD+N |
|
Communication � switcher |
|
Serial control port |
|
|
SW2 and SW4 DVI Plus |
1
RS-232 9-pin female D |
|
All other models |
1
RS-232 3.5 mm captive screw connector, 5-pole (shared with auto-input
switching control) |
|
Baud rate and protocol |
9600 baud, 8 data bits, 1 stop bit, no parity |
|
Serial control pin configurations |
|
|
SW2 and SW4 DVI Plus |
2 = Tx, 3 = Rx, 5 = GND |
|
All other models |
1
= Tx, 2 = Rx, 3 = GND |
|
Contact closure |
SW6 and SW8 DVI Plus models; and SW2, SW4, SW6, and SW8 DVI A Plus only:
For auto-input switching only. (1) 3.5 mm captive screw connector, 5
pole (shared with RS-232) |
|
Contact closure pin configuration |
SW6 and SW8 DVI Plus models; and SW2, SW4, SW6, and SW8 DVI A Plus only:
4 and 5 shorted together enable auto-input switching mode. |
|
IR controller module |
IR 102 Remote Control, optional
30' maximum, 40 degrees off axis |
|
Program control |
Extron Universal Switcher Control/configuration program for Windows�
Extron Simple Instruction Set (SIS�) |
|
General |
|
Power supply |
External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A |
|
Power consumption |
|
|
SW2 and SW4 DVI Plus |
|
|
Device |
2.6 watts, 12 VDC |
|
Device and power supply |
5.3 watts, 12 VDC |
|
SW2 and SW4 DVI A Plus |
|
|
Device |
3.5 watts, 12 VDC |
|
Device and power supply |
4.5 watts, 12 VDC |
|
SW6 and SW8 models |
|
|
Device |
7.7 watts, 12 VDC |
|
Device and power supply |
10 watts, 12 VDC |
|
Temperature/humidity |
Storage: -40 to +158 �F (-40 to +70 �C) / 10% to 90%, noncondensing
Operating: +32 to +122 �F (0 to +50 �C) / 10% to 90%, noncondensing |
|
Cooling |
Convection, no vents |
|
Thermal dissipation |
|
|
SW2 and SW4 DVI Plus |
|
|
Device |
9.2 BTU/hr |
|
Device and power supply |
18.1 BTU/hr |
|
SW2 and SW4 DVI A Plus |
|
|
Device |
11.6 BTU/hr |
|
Device and power supply |
15.0 BTU/hr |
|
SW6 and SW8 models |
|
|
Device |
27.1 BTU/hr |
|
Device and power supply |
34.1 |
|
Mounting |
|
|
SW2 and SW4 models |
|
|
Rack mount |
Yes, with optional rack shelf kit
Back of the rack mountable with optional back-of-the-rack mounting kit |
|
Furniture mount |
Yes, with optional under-desk mounting kit |
|
SW6 and SW8 models |
Rack mountable with included bracket kit |
|
Enclosure type |
Metal |
|
Enclosure dimensions |
|
|
SW2 and SW4 models |
1.75" H x 8.75" W x 3.0" D
(1U high, half rack wide)
(4.4 cm H x 22.2 cm W x 7.6 cm D)
(Depth excludes connectors.) |
|
SW6 and SW8 models |
1.75" H x 17.5" W x 8.5" D (1U high, full rack wide)
(4.4 cm H x 44.4 cm W x 21.6 cm D)
(Depth excludes connectors.) |
|
Product weight |
|
|
SW2 and SW4 models |
0.6 lbs (0.3 kg) |
|
SW6 and SW8 models |
3.8 lbs (1.7kg) |
|
Shipping weight |
|
|
SW2 and SW4 models |
2
lbs (1 kg) |
|
SW6 and SW8 models |
5
lbs (3 kg) |
|
DIM weight |
SW6 and SW8 models only: 6 lbs (2.7 kg) |
|
Vibration |
ISTA 1A in carton (International Safe Transit Association) |
|
Regulatory compliance |
|
|
Safety |
CE, c-UL, UL |
|
EMI/EMC |
CE, C-tick, FCC Class A, ICES, KCC, VCCI |
|
Warranty |
3
years parts and labor |
| NOTE |
All
nominal levels are at �10%. |
|
| NOTE |
Specifications are subject to change without notice.
|
|
|
| |
|
|
| |
|
|
