The Extron SW6 RGBHV is a high performance, six
input RGBHV switcher using BNC connectors. The switcher allows multiple RGBHV,
RGBS, RGsB, RsGsBs, HDTV component video, S-video, or composite video sources to
be switched to one compatible display device. With 350 MHz (-3 dB) RGB video
bandwidth, it supports a wide array of high resolution signals.The SW6 RGBHV
provides multiple control options including front panel, RS-232, contact
closure, and auto-input switching. The auto-input switch function can be enabled
or disabled via a toggle switch on the back panel. The SW6 RGBHV is housed in a
1U, rack-mountable metal enclosure and ships with rack ears.
The SW6 RGBHV can be controlled through a 9-pin remote control port which
enables RS-232 control, as well as contact closure control. It is also
compatible with the Extron KP 6 Keypad Remote Control and the Extron IR 102 Kit
IR remote. |
� Inputs: Six sets of female BNC
connectors
� Output: One set of female BNC connectors
� 350 MHz (-3 dB) RGB video bandwidth
� Compatible with RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, S-video, and
composite video signals
� Automatically detects which inputs have an active signal and reports this
information through the RS-232 port
� Auto-input switching � Automatically switches to the highest-numbered input
with an active video signal.
� RS-232 control
� Contact closure remote control
� Rack-mountable 1U metal enclosure
� Highly reliable, energy-efficient internal universal power supply � The
100-240 VAC, 50/60 Hz, international power supply provides worldwide power
compatibility with high demonstrated reliability. |
|
Video |
|
Gain |
Unity. |
|
Bandwidth |
350 MHz (-3 dB) |
|
Crosstalk |
-70 dB @ 10 MHz |
|
Switching speed |
5 ms (max.) |
|
Video input |
|
Number/signal type |
|
|
SW2 RGBHV/RGBHV A |
2 RGBHV, RGBS, RGsB, RsGsBs, HDTV component
video, S-video, composite video (or digital audio) |
|
SW4 RGBHV/RGBHV A |
4 RGBHV, RGBS, RGsB, RsGsBs, HDTV component
video, S-video, composite video (or digital audio) |
|
SW6 RGBHV/RGBHV A |
6 RGBHV, RGBS, RGsB, RsGsBs, HDTV component
video, S-video, composite video (or digital audio) |
|
Connectors |
|
|
SW2 RGBHV/RGBHV A |
2 x 5 female BNC |
|
SW4 RGBHV/RGBHV A |
4 x 5 female BNC |
|
SW6 RGBHV/RGBHV A |
6 x 5 female BNC |
|
Nominal level |
1.0 Vp-p for Y of component video and
S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
|
Minimum/maximum levels |
Analog: 0.3 V to 1.5 Vp-p with no offset |
|
Impedance |
75 ohms |
|
Return loss |
<-30 dB @ 10 MHz |
|
DC offset (max. allowable) |
5.0V |
|
Input coupling |
DC |
|
Video output |
|
Number/signal type |
1 RGBHV, RGBS, RGsB, RsGsBs, HDTV component
video, S-video, composite video (or digital audio) |
|
Connectors |
5 female BNC |
|
Nominal level |
1.0 Vp-p for Y of component video and
S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
|
Minimum/maximum levels |
0.5 V to 1.5 Vp-p (follows input) |
|
Impedance |
75 ohms |
|
Return loss |
<-30 dB @ 10 MHz |
|
DC offset |
�5 mV maximum with input at 0 offset |
|
Sync |
|
Input type |
RGBHV, RGBS, RGsB, RsGsBs, bi-level and
tri-level sync |
|
Output type |
RGBHV, RGBS, RGsB, RsGsBs, bi-level and
tri-level sync |
|
Input level |
Analog or TTL, 0.5 V to 5.0 Vp-p |
|
Output level |
5.0 Vp-p, unterminated, for V output; H
output follows input |
|
Input impedance |
510 ohms for V input and unselected H input;
the selected H input impedance is determined by the device connected to
the H output. |
|
Output impedance |
75 ohms for V output; the H output impedance
is determined by the device connected to the selected H input. |
|
Max. input voltage |
5.0 Vp-p |
|
Max. propagation delay |
35 ns |
|
Max. rise/fall time |
4 ns |
|
Polarity |
Positive or negative (follows input) |
|
Audio � SW 2/4/6 RGBHV A only |
|
Gain |
-18 to +24 dB, adjustable
When audio gain is set to unity (0 dB), balanced output will have a 0 dB
gain; unbalanced output will be attenuated by 6 dB. |
|
Frequency response |
20 Hz to 20 kHz, �0.05 dB |
|
THD + Noise |
0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal
level |
|
S/N |
>90 dB at maximum output |
|
Crosstalk |
<-65 dB @ 20 kHz, <-80 dB @ 1 kHz or below
60 Hz |
|
Stereo channel separation |
>80 dB @ 20 Hz to 20 kHz |
|
CMRR |
>75 dB @ 20 Hz to 20 kHz |
|
Digital audio � all models' H channel |
|
Input type |
Dolby� Digital, DTS, AES/EBU |
|
Output type |
Dolby Digital, DTS, AES/EBU |
|
Bandwidth |
250 MHz (-3 dB) |
|
Sampling rates |
32, 44.1, 48, 96 kHz |
|
Input level |
0.5 V to 5.0 Vp-p |
|
Output level |
2.5 Vp-p (when terminated with 75 ohms) |
|
Input impedance |
510 ohms for unselected inputs; for the
selected input, impedance is determined by the device connected to the
output |
|
Output impedance |
Determined by the device connected to the
selected input |
|
Max. input voltage |
5.0 Vp-p |
|
Max. propagation delay |
35 ns |
|
Max. rise/fall time |
4 ns |
| NOTE |
0
dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
Audio input � SW 2/4/6 RGBHV A only |
|
Number/signal type |
2, 4, or 6 (depending on the model) stereo,
balanced/unbalanced |
|
Connectors |
2, 4, or 6 (depending on the model) 3.5 mm
captive screw connectors, 5 pole |
|
Impedance |
>10k ohms unbalanced, 20k ohms balanced, DC
coupled |
|
Nominal level |
-20 dBV (100 mVrms), -10 dBV (316 mVrms), 0
dBu (0.775 Vrms), or
+4 dBu (1.23 Vrms), configurable |
|
Maximum level |
+20 dBu, (balanced or unbalanced) at 1%
THD+N |
|
Input gain adjustment |
-24 dB to +18 dB, adjustable per input |
|
Input coupling |
DC |
|
Audio output � SW 2/4/6 RGBHV A only |
|
Number/signal type |
1 stereo, balanced/unbalanced |
|
Connectors |
(1) 3.5 mm captive screw connector, 5 pole |
|
Impedance |
50 ohms unbalanced, 50 ohms balanced |
|
Nominal level |
-10 dBV (316 mV) or +4 dBu (1.23 V),
configurable |
|
Maximum level (Hi-Z) |
>26 dBu, balanced; >+20 dBu, unbalanced at
1% THD+N |
|
Maximum level (600 ohm) |
>+21 dBm, balanced; >+15 dBm, unbalanced at
1% THD+N |
|
Control/remote � switcher |
|
Serial control port |
RS-232, female 9-pin D connector (same as
the contact closure port) |
|
Baud rate and protocol |
9600 baud, 8 data bits, 1 stop bit, no
parity |
|
Serial control pin configuration |
2 = TX, 3 = RX, 5 = GND |
|
Contact closure |
1 female 9-pin D connector (same as the
RS-232 port) |
|
Contact closure pin configuration |
1 = input #1, 4 = input #2, 6 = input #3, 7
= input #4, 8 = input #5, 9 = input #6 |
|
Program control |
Extron control/configuration program for
Windows�
Extron Simple Instruction Set (SIS�) |
|
General |
|
Power |
100 VAC to 240 VAC, 50-60 Hz, 20 watts,
internal |
|
Temperature/humidity |
Storage: -40 to +158 �F (-40 to +70 �C) /
10% to 90%, non-condensing
Operating: +32 to +122 �F (0 to +50 �C) / 10% to 90%, non-condensing |
|
Cooling |
Convection, no vents |
|
Rack mount |
|
|
SW2 RGBHV, SW2 RGBHV A |
Yes, with optional 1U deep rack shelf |
|
All other models |
Yes, with included mounting kit |
|
Enclosure type |
Metal |
|
Enclosure dimensions |
|
|
SW2 RGBHV, SW2 RGBHV A |
1.75" H x 8.75" W x 9.5" D (1U high, half
rack wide)
4.4 cm H x 22.2 cm W x 24.1 cm D
(Depth excludes connectors.) |
|
All other models |
1.75" H x 17.5" W x 8.5" D (1U high, full
rack wide)
4.4 cm H x 44.5 cm W x 21.6 cm D
(Depth excludes connectors.) |
|
Product weight |
|
|
SW2 RGBHV |
2.4 lbs (1.1 kg) |
|
SW2 RGBHV A |
2.5 lbs (1.1 kg) |
|
All other models |
7.0 lbs (3.2 kg) |
|
Shipping weight |
|
|
SW2 RGBHV, SW2 RGBHV A |
5 lbs (3kg) |
|
All other models |
12 lbs (6 kg) |
|
Vibration |
ISTA 1A in carton (International Safe
Transit Association) |
|
Regulatory compliance |
|
|
Safety |
CE, c-UL, UL |
|
EMI/EMC |
CE, C-tick, FCC Class A, ICES, VCCI |
|
Warranty |
3 years parts and labor |
|
| |
|
|
