| Extron SW2 DP Two Input DisplayPort Switcher |
Product Code: SWD2DP
 |
The Extron SW2 DP is a two input, one output
DisplayPort switcher. The SW2 DP is HDCP compliant and supports data rates up to
10.8 Gbps and computer resolutions up to 2560x1600 @ 60 Hz. It features EDID
Minder�, which maintains continuous EDID communication with connected devices
and ensures that the DisplayPort sources power up properly and maintain correct
video output. The SW2 DP provides automatic input cable equalization up to 25
feet at 2560x1600 @ 60 Hz on Extron DisplayPort Series cable. Multiple control
points, including front panel, RS-232, and auto-input switching, simplify
integration into a variety of system designs. The SW2 DP switcher is ideal for
applications that require the routing of two DisplayPort sources to a single
display.
To enhance and streamline integration, the SW2 DP offers integrator-friendly
features, including automatic input cable equalization, and indicators for
monitoring and troubleshooting. Automatic input cable equalization restores and
reshapes incoming signals, reducing the need for additional signal conditioning
equipment by compensating for weak source signals or signal loss from a long
input cable. Additionally, the SW2 DP provides immediate visual confirmation of
EDID status, HDCP authentication, and signal presence for each port via LED
indicators.
Housed in a 1U, half rack width metal enclosure, the SW2 DP can be mounted in a
rack or installed beneath a desk. It includes an external, universal power
supply for worldwide power compatibility. |
�
Switches DisplayPort video and embedded
multi-channel digital audio signals
� Inputs: Two female DisplayPort connectors
� Output: One female DisplayPort connector
� EDID Minder� automatically manages EDID communication between connected
devices � EDID Minder ensures that sources power up properly and reliably output
content for display.
� Supports DisplayPort data rates up to 10.8 Gbps
� Supports PC resolutions up to 2560x1600 @ 60 Hz and HDTV 1080p/60
� HDCP compliant
� Automatic input cable equalization to 25 feet (7.6 meters) at 2560x1600 @ 60
Hz with Extron DisplayPort cables � Actively conditions incoming DisplayPort
signals to compensate for signal loss when using long cables, low quality
cables, or a source device with poor signal output.
� EDID status, HDCP authentication, and signal presence LED indicators �
Front-panel LED indicators for signal presence and HDCP authentication provide
real-time feedback and monitoring of key performance parameters. The tri-color
EDID LED indicator on the back panel notifies whether an internal or external
EDID is stored.
� Front panel security lockout � Prevents unauthorized use in non-secure
environments. In lockout mode, a special button combination is required to
operate the switcher from the front panel.
� Multiple control points including front panel, RS-232, and auto-input
switching � Offers integration flexibility into a variety of control
environments.
� Rack-mountable, 1U half rack width metal enclosure
� Highly reliable, energy-efficient external universal power supply included,
replacement part #70-775-01 � Provides worldwide power compatibility, with high
demonstrated reliability and low power consumption for reduced operating costs. |
|
Video |
|
Maximum bit rate |
Up to 10.8 Gbps (2.7 Gbps per lane) |
|
Maximum pixel clock |
268 MHz |
|
Resolution range |
Up to 2560x1600 @ 60 Hz |
|
Formats |
RGB and YCbCr digital video |
|
Standards |
DisplayPort 1.1a, HDCP |
|
Video input |
|
Number/signal type |
2 DisplayPort |
|
Connectors |
2 female DisplayPort |
|
Input cable length |
Up to 25' (7.6 m) |
|
Video output |
|
Number/signal type |
1 DisplayPort |
|
Connectors |
1 female DisplayPort |
|
Output cable length |
Up to 25' (7.6 m) |
|
Control/remote � switcher |
|
Serial control port |
1 RS-232, 3.5 mm captive screw connector, 5
pole (shared with auto-input switching) |
|
Baud rate and protocol |
9600 baud, 8 data bits, 1 stop bit, no
parity |
|
Serial control pin configurations |
1 = Tx, 2 = Rx, 3 = GND |
|
Contact closure |
(1) 3.5 mm captive screw connector, 5 pole
(shared with RS-232) for auto-input switching |
|
Contact closure pin configuration |
Pins 4 and 5 shorted together enable
auto-input switching. |
|
USB control port |
1 front panel female mini USB B |
|
USB standards |
USB 2.0, low speed |
|
Program control |
Extron Simple Instruction Set (SIS�) |
|
General |
|
Power supply |
External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 watts |
|
Power consumption |
|
|
Device |
5.0 watts, 12 VDC |
|
Device and power supply |
5.8 watts, 12 VDC |
|
Temperature/humidity |
Storage: -40 to +158 �F (-40 to +70 �C) /
10% to 90%, noncondensing
Operating: +32 to +122 �F (0 to +50 �C) / 10% to 90%, noncondensing |
|
Cooling |
Convection, no vents |
|
Thermal dissipation |
|
|
Device |
17.0 BTU/hr |
|
Device and power supply |
19.5 BTU/hr |
|
Mounting |
|
|
Rack mount |
Yes, with optional rack shelf or back of the
rack mounting kit |
|
Enclosure type |
Metal |
|
Enclosure dimensions |
1.75" H x 8.75" W x 3.0" D (1U high, half
rack wide)
(4.4 cm H x 22.2 cm W x 7.6 cm D)
(Depth excludes connectors.) |
|
Product weight |
0.5 lbs (0.2 kg) |
|
Shipping weight |
2 lbs (1 kg) |
|
Vibration |
ISTA 1A in carton (International Safe
Transit Association) |
|
Regulatory compliance |
|
|
Safety |
CE, c-UL, UL |
|
EMI/EMC |
CE, C-tick, FCC Class A, ICES, VCCI |
|
Environmental |
Complies with appropriate requirements of
RoHs and WEEE. |
|
Warranty |
3 years parts and labor |
| NOTE |
All
nominal levels are at �10%. |
|
| NOTE |
Specifications are subject to change without notice.
|
|
|
| |
|
|
| |
|
|
