Extron MLS 608 D

Eight Input Switcher with ProDSP�

Extron XTP Systems
Home > Extron > HDMI, DVI & DisplayPort Switchers > MLS 608 D
Extron MLS 608 D Eight Input Switcher with ProDSP�
Extron MLS 608 D
Product Code: MLS608D
  MLS 608 D   Variable Preamp Output - No Amplifier

Buy Sell Sales Extron MLS 608 D
  MLS 608 D MA   40 Watt 70 Volt Mono Power Amplifier

Buy Sell Sales Extron MLS 608 D MA
  MLS 608 D SA   2x20 Watt Stereo Power Amplifier

Buy Sell Sales Extron MLS 608 D SA

The Extron MLS 608 D Series switchers are simple-to-use, eight input, multi-format switchers designed to integrate digital and analog sources. All signals are transmitted over CATx cable to the included MTP/HDMI U R Twisted Pair Receiver. The MLS 608 D Series features Extron ProDSP� digital audio processing, which provides an extensive array of easy-to-use tools for audio system setup and fine-tuning. The MLS 608 D Series offers digital video switching with four HDCP-compliant, HDMI inputs, and analog video switching with four universal inputs, including an Extron Universal MTP Twisted Pair input. It outputs HDMI twisted pair signals and analog MTP Twisted Pair to the included receiver, providing a complete digital and analog video and audio switching system.

The MLS 608 D is available in three models. The MLS 608 D is a non-amplified model with a variable preamp output. The MLS 608 D SA features stereo power amplification with 20 watts rms per channel into 4 or 8 ohms. The MLS 608 D MA features mono 70 volt amplification with 40 watts rms output. The MLS 608 D switchers are ideal for classrooms, conference rooms, and other AV environments that require the flexibility to integrate a mix of digital and analog video switching in a single switcher.
� Multi-input switcher for digital and analog video signals
� Inputs: Three 15-pin HD connectors - one with loop-through for RGBHV, HDTV component video, and S-video or composite video; one Universal MTP Twisted Pair input, four HDMI connectors; seven captive screw connectors for balanced or unbalanced stereo audio; one balanced or unbalanced mono audio input via MTP
� Outputs - on MTP/HDMI U R receiver: RGB on 15-pin HD, component video on BNCs, S-video on 4-pin mini DIN, composite video on BNC, HDMI connector, captive screw connector for communications, and three captive screw connectors for balanced or unbalanced audio - two on MLS 608 D switchers and one on MTP/HDMI U R
� ProDSP� 32/64-bit floating point signal processing � The MLS 608 D switchers feature 32/64-bit floating point audio DSP processing, which maintains very wide dynamic range and audio signal transparency, to simplify management of gain staging while reducing the possibility of DSP signal clipping.
� Transmits HDMI and analog video, plus audio and RS-232 over CATx cables
� Includes MTP/HDMI U R Twisted Pair Receiver � Automatically routes incoming signals to the appropriate output connectors.
� HDCP compliant � The MLS 608 D switchers and included MTP/HDMI U R fully support switching and long distance transmission of HDCP signals.
� EDID Minder� automatically manages EDID communication between connected devices � EDID Minder ensures that all sources power up properly and reliably output content for display.
� HDMI audio de-embedding � Strips two-channel PCM audio off HDMI inputs, allowing for DSP processing and signal routing.
� HDCP Visual Confirmation provides a green signal when encrypted content is sent to a non-compliant display � A full-screen green signal is sent when HDCP-encrypted content is transmitted to a non-HDCP compliant display, providing immediate visual confirmation that protected content cannot be viewed on the display.
� Cable equalization for each HDMI input � Actively conditions incoming HDMI signals to compensate for signal loss when using long HDMI cables, low quality HDMI cables, or source devices with poor HDMI signal output.
� Sends 720p, 1080i, and XGA (1024x768) HDMI signals over 200 feet (60 meters), 1080p/60 and 1920x1200 HDMI signals over 100 feet (30 meters) with standard CAT 5e cable � Extron STP201 Digital Twisted Pair cable provides added protection from outside interference and increases overall signal transmission distance, allowing 1080p/60 and 1920x1200 signals to be sent 50% further than with standard CAT 5e cable.
� Four input analog universal video switching � Four universal inputs, including an Extron Universal MTP Twisted Pair, accept RGBHV, HDTV component video, and S-video or composite video sources. The output is Universal MTP Twisted Pair to the included MTP/HDMI U R.
� Controllable via TouchLink� Control System, MediaLink� Controller, front panel buttons, or RS-232 � The switchers can be controlled using the front panel backlit buttons or RS-232. An optional TouchLink Touchpanel Control System or MediaLink Controller may be connected to the RS-232 port to provide a simple and intuitive user interface for the MLS Switchers, and the entire room.
� Skew equalization for MTP input and output � Skew adjustments are stored in memory for both the MTP input and output, maintaining RGB color alignment at all times.
� Separate variable level and peaking controls for analog MTP signals
� Front panel control with backlit buttons � The buttons can be custom-labeled for easy identification. Because the buttons illuminate, they are helpful for presenters in low-light environments.
� Audio switching and output volume control � The MLS 608 D Series features audio switching for seven stereo balanced or unbalanced input sources, and provides master volume control and muting. Three balanced or unbalanced outputs are available, two on the MLS 608 D switchers, and a third on the MTP/HDMI U R. Each output can be set as variable or fixed.
� Audio input gain and attenuation � Gain or attenuation can be adjusted for each input to eliminate noticeable differences when switching between sources.
� Two mic/line level inputs with 48 volt phantom power � The MLS 608 D is equipped with two mic/line level inputs. Selectable 48 volt phantom power allows the use of condenser microphones.
� Available with integrated stereo or mono 70 volt power amplifier � The MLS 608 D SA offers stereo power amplifier with 20 watts rms output per channel into 4 or 8 ohms while the MLS 608 D MA offers a mono 70 volt power amplifier with 40 watts rms output. Both feature an Extron exclusive, highly efficient, advanced Class D amplifier design with CDRS� - Class D Ripple Suppression, an Extron patented technology that provides a smooth, clean audio waveform and an improvement in signal fidelity over conventional Class D amplifier designs. CDRS eliminates the high frequency switching ripple characteristic of Class D amplifiers, a source of RF emissions which can interfere with sensitive AV equipment such as wireless microphones.
� DSP Configurator� Software � A powerful yet user-friendly PC-based software tool for managing all audio and video operations of the MLS 608 D. It enables complete setup and configuration of digital audio processing tools on the ProDSP platform, as well as switching and mixing.
� Front panel USB configuration port � Provides convenient access for system setup and configuration, as well as ProDSP for audio system integration.
� MTP/HDMI U R receiver plenum rated - meets UL 2043 for heat and smoke release, excluding power supply
� Power Save Mode � The MLS 608 D can be placed in standby to conserve energy when not in use. When power save mode is enabled, the switcher draws less than four watts of power, reducing cost. The power indicator LED turns amber to indicate that the switcher is in the power-save standby state.
� Rack-mountable 2U, full rack width metal enclosure
� Includes LockIt� HDMI cable lacing brackets
� Highly reliable, energy-efficient internal universal power supply � The 100-240 VAC, 50/60 Hz, international power supply provides worldwide power compatibility with high demonstrated reliability.
MLS 608 D Series with MTP/HDMI U R

Video � MLS analog inputs
   Gain  Unity
   Differential phase error  1� at 3.58 MHz and 4.43 MHz
   Differential gain error  1% at 3.58 MHz and 4.43 MHz
   Crosstalk  -68 dB @ 10 MHz, -39 dB @ 100 MHz
   Switching speed  <100 ms (max.)
   Skew compensation  Up to 62 ns (adjustable)
   Signal transmission distance, analog 

Video � MLS digital inputs
   Maximum data rate  6.75 Gbps (2.25 Gbps per color)
   Maximum pixel clock  225 MHz
   Resolution range  Up to 1920x1200 or 1080p @ 60 Hz
   Formats  RGB and YCbCr digital video
   Standards  DVI 1.0, HDMI 1.3 compatible
    NOTE     *Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output.

Video input and loop-through MLS
   Number/signal type   
      Analog  3 RGBHV, RGBS, component video, S-video, or composite video input
1 RGBHV, RGBS loop-through
1 analog proprietary signal from an Extron MTP transmitter
       NOTE     The switcher does not accept or pass RS-232 serial signals from an MTP transmitter on the MTP input.
      Digital video  4 HDMI (or DVI*) digital video
   Connectors  4 female 15-pin HD: 3 for input, 1 for buffered loop-through
1 female RJ-45 for MTP input
4 female HDMI
   Nominal level  1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
   Minimum/maximum levels   
      Inputs 1-3   
         RGB  Analog: 0.3 V to 1.5 Vp-p with no offset
         S-video, composite video  Analog: 0.4 V to 2.0 Vp-p with no offset
      Input 4   
         RGB  Analog: 0.3 V to 1.5 Vp-p with no offset
         S-video, composite video  Analog: 0.8 V to 1.5 Vp-p with no offset
   Impedance   
      Analog inputs  75 ohms
   Horizontal frequency  15 kHz to 145 kHz
   Vertical frequency  30 Hz to 170 Hz
   Resolution range  Up to 1920x1200 or 1080p @ 60 Hz
   Return loss   
      RGB  <-40 dB @ 5 MHz
      S-video, composite video  <-30 dB @ 5 MHz
   DC offset (max. allowable)   
      Inputs 1-3  1.5 V
      Input 4  1.0 V

Video output � MLS
   Number/signal type  3 proprietary signals for an Extron MTP/HDMI U R receiver: 1 analog, 2 digital
   Connectors  3 female RJ-45 for CAT 5/5e/6 UTP (unshielded twisted pair) or STP (shielded twisted pair) cables connecting the MLS 608 D to an MTP/HDMI U R receiver
    NOTE     Shielded twisted pair cable is recommended for the video output connections.
   Maximum resolution  1920x1200 or 1080p @ 60 Hz (for digital output)
   Signal transmission distance, digital 
    NOTE     Shielded twisted pair cable provides added protection from outside interference and increases overall signal transmission distance. Extron strongly recommends using shielded twisted pair for optimal performance.

Sync � MLS
   Input type  RGBHV, RGBS, component video
   Standards  TTL (RGB), NTSC 3.58, NTSC 4.43, PAL, SECAM
   Input level  2.0 V to 5.0 Vp-p
   Output level  5.0 Vp-p
   Input impedance  585 ohms
   Polarity  Negative

Audio � MLS
   Gain   
      Input 4  Unbalanced output: 0 dB; balanced output: 6 dB
      All other inputs  Unbalanced output: -6 dB; balanced output: 0 dB
   Frequency response
      Power amp (MA model)  80 Hz to 20 kHz, -3 dB to +1 dB @ 1 watt output (11 Vrms)
      Power amp (SA model)  20 Hz to 20 kHz, -3 dB to +1 dB @ 1 watt output, 8 ohm load
      Input 4   
         Lineout  20 Hz to 20 kHz, �0.5 dB
         Output 3  20 Hz to 20 kHz, �1 dB
      All other inputs   
         Lineout  20 Hz to 20 kHz, �0.2 dB
   THD + Noise   
      Power amp (amplifier models only)  <0.1% @ 1 kHz, at -3 dB
      Input 4   
         Output 3  <0.15% @ 1 kHz at nominal level
      All other inputs   
         Lineout  <0.01% @ 1 kHz at nominal level
   S/N at max. power output or line level output (unweighted)
      Power amp (amplifier models only)  >90 dB at 20 Hz to 20 kHz, 8 ohm load
      Input 4   
         Lineout  >90 dB, balanced
         Output 3  >90 dB, balanced
      All other inputs   
         Lineout  >100 dB, balanced
   Crosstalk   
      Power amp (amplifier models only)  <-70 dB @ 1 kHz
      Lineout  <-90 dB @ 1 kHz, fully loaded
   Stereo channel separation   
      Input 4  Not applicable (mono)
      All other inputs  >96 dB @ 1 kHz
   CMRR   
      Input 4  Not applicable (mono)
      All other inputs  >70 dB @ 1 kHz
   Volume range   
      Program volume  -100 dB to 0 dB (in 0.1 dB steps)
      Mic volume  -100 dB to +12 dB (in 0.1 dB steps)

Audio input � MLS
   Number/signal type  7 stereo, line level, balanced/unbalanced (inputs 1-3, 5-8 analog)
2 mono, line level, balanced/unbalanced (mic/line level inputs)
1 proprietary analog signal (mono, from MTP input 4)
4 stereo, de-embedded from HDMI (2-channel, PCM only, from HDMI inputs 5-8)
   Connectors  (7) 3.5 mm captive screw connectors, 5 pole (inputs 1-3, 5-8)
(2) 3.5 mm captive screw connectors, 3 pole (mic/line level inputs)
1 female RJ-45 connector (shared with video signals from MTP)
   Impedance  >10k ohms unbalanced, 20k ohms balanced, DC coupled
   Nominal level   
      Mic/line input  Mic level, -60 dBV (1 mVrms) when mic gain is set to +40 dB
      All other inputs  +4 dBu (1.23 Vrms) when level is set to 0 dB
   Maximum level   
      Mic/line input  +21 dBu when Mic gain is set to 0 dB
      Input 4  +15 dBu, unbalanced when output 3 gain is set to 0 dB
      All other inputs  +21 dBu when input gain is set to 0 dB
   Input gain adjustment   
      Mic/line input  -18 dB to +80 dB, adjustable per input
      All other inputs  -18 dB to +24 dB, adjustable per input
   Mic phantom power  +48 VDC (can be switched on or off)
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu.

Audio output � line level (all models) � MLS
   Number/signal type  2 stereo or dual mono, balanced/unbalanced (fixed or variable, selectable)
1 dual mono, balanced/unbalanced (fixed or variable, selectable), via MTP
   Connectors  (2) 3.5 mm captive screw connectors, 5 pole
   Impedance  50 ohms unbalanced, 100 ohms balanced
   Gain error  �0.2 dB channel to channel
   Nominal level  +4 dBu (1.23 Vrms)
   Maximum level (Hi-Z)  >+21 dBu, balanced; >+15 dBu, unbalanced
    NOTE     Unbalanced wired outputs have -6 dB gain.  Balanced outputs result in a 0 dB gain.

Audio output � power amplifier (amplifier models only) � MLS
   Number/signal type   
      MA model  1 mono, 70 V line
      SA model  1 stereo (default) or 2 mono, 2 channels total
   Connector  (1) 5 mm screw lock captive screw connector, 4 pole
    NOTE     These connectors accept wires of 22 AWG to 12 AWG.
   Load impedance   
      MA model  123 ohms minimum
      SA model  4 or 8 ohms
   Amplifier type  Class D
   Output power   
      MA model  40 watts (rms), 70 V, 1 kHz, 1% THD
      SA model  20 watts (rms) per channel, 4 or 8 ohms, 1 kHz, 1% THD
   Protection  Clip limiting, thermal, short circuit, DC output

Control/remote � switcher � MLS
    NOTE     The front panel USB port and rear panel RS-232 port are independent of each other and can be used at the same time.
   Serial control port  1 bidirectional RS-232: 1 rear panel 3.5 mm captive screw connector, 5 pole (uses 3 poles)
   Baud rate and protocol  300 to 115200 baud (38400 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits; no parity (default), or even, odd, mark, or space parity; no flow control (default)
   Serial control pin configuration  1 = Tx, 2 = Rx, 3 = GND, 4 = neutral/GND, 5 = +12 VDC
    NOTE     The +12 VDC and ground pins can be used to power a MediaLink� Controller.
   USB control ports  1 front panel female mini USB B
   USB standards  USB 2.0, low speed
   Program control  Extron DSP Configurator� software for Windows�
Extron Simple Instruction Set (SIS�)

Control/remote � external device (pass-through) � MLS
   Serial control port input  Bidirectional RS-232 via (1) 3.5 mm captive screw connector, 5 pole (uses 3 poles)
   Serial control port output  1 set of proprietary signals on a female RJ-45 jack
    NOTE     Protocol is mirrored between the MLS 608 D and the MTP/HDMI U R receiver.
   Serial control pin configuration  Captive screw connector: 1 = Tx, 2 = Rx, 3 = GND, 4 = n/a, 5 = n/a

General � MLS
   Power supply  Internal
Input: 100-240 VAC, 50-60 Hz
      MLS 608 D  1.0 A
      MLS 608 D MA, MLS 608 D SA  1.2 A
   Power consumption   
      Full load (amp output at 1/8 power)   
         MLS 608 D  42 watts
         MLS 608 D MA  56 watts
         MLS 608 D SA  54 watts
      Standby  4 watts
   Auxiliary power output   
      Port 1  12 watts, 12 VDC, on a 2 pole connector
      Port 2  7.2 watts, 12 VDC, on a 5 pole connector shared with the serial control port
   Temperature/humidity  Storage: -40 to +158 �F (-40 to +70 �C) / 10% to 90%, noncondensing
Operating: +32 to +111 �F (0 to +43.9 �C) / 10% to 90%, noncondensing
   Cooling  Convection, vents on sides and top
   Thermal dissipation   
      MLS 608 D, full load  143 BTU/hr
      MLS 608 D MA, full load, amp output at 1/8 power  191 BTU/hr
      MLS 608 D SA, full load, amp output at 1/8 power  185 BTU/hr
      Standby, all models  13.7 BTU/hr
   Rack mount  Yes, with included brackets
   Enclosure type  Metal
   Enclosure dimensions  3.5" H x 17.5" W x 12.0" D (2U high, full rack wide)
(8.9 cm H x 44.4 cm W x 30.5 cm D)
(Depth excludes connectors, knob, and buttons. Width excludes rack ears.)
   Product weight  7 lbs (3.2 kg)
   Shipping weight  13 lbs (6 kg) including MTP/HDMI U R receiver
   DIM weight   
      USA/Canada  21 lbs (10 kg)
      International  25 lbs (12 kg)
   Vibration  ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance   
      Safety  CE, c-UL, UL
      Compliances  CE, C-tick, FCC Class A, ICES, VCCI
      Environmental  Complies with the appropriate requirements of RoHS, WEEE
      Accessibility  Section 508 of the Rehabilitation Act (29 U.S.C. 794d)
   Warranty  3 years parts and labor

Video � MTP/HDMI U R
   MTP input   
      Gain  Unity
      Maximum resolution   
         Analog  Up to 2048x1080 or 1080p at 60 Hz
      Signal transmission distance, analog  See the "Video � MLS analog inputs" section of these specifications
   HDMI digital input   
      Maximum data rate  4.95 Gbps (1.65 Gbps per color)
      Maximum pixel clock  165 MHz
      Maximum resolution   
         Digital  Up to 1920x1200 or 1080p at 60 Hz
      Signal transmission distance, digital  See the "Video output � MLS" section of these specifications
       NOTE     The transmission distance varies greatly depending on the signal resolution and on the type of cable, graphics card, and display used in the system.
      Formats  RGB and YCbCr digital video
      Standards  DVI 1.0, HDMI 1.2

Video input � MTP/HDMI U R
   Number/signal type   
      Analog inputs  1 set of proprietary analog signals
      HDMI digital input  1 set of proprietary digital signals
   Connectors   
      MTP input  1 female RJ-45
      HDMI digital input  2 female RJ-45

Video output � MTP/HDMI U R
   Number/signal type   
      Analog output  1 RGBHV, RGBS, component video (bi-level and tri-level), S-video, composite video (follows input type)
      HDMI digital output  1 single link HDMI (or DVI-D*)
   Connectors   
      Analog output  1 female 15-pin HD for RGB
3 female BNC for Y, R-Y, B-Y
1 female 4-pin mini DIN for S-video (Y/C)
1 female BNC for composite video
      HDMI digital output  1 female HDMI type A
   Nominal levels  Analog outputs:
1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
   Minimum/maximum level  Analog outputs: 0.8 V to 1.2 Vp-p
   Impedance  Analog outputs: 75 ohms (during video output only)
   Return loss  Analog outputs: <-30 dB @ 5 MHz (during video output only)
   DC offset  Analog outputs: <�20 mV with input at 0 offset

Sync � analog outputs � MTP/HDMI U R
   Output type  RGBHV, RGBS, Component video (bi- or tri-level)
   Standards  NTSC 3.58, NTSC 4.43, PAL, SECAM
   Output level  4.0 V to 5.0 Vp-p, unterminated
   Output impedance  87 ohms (24 mA)
   Polarity  Positive or negative (selectable)

Audio � from MTP input � MTP/HDMI U R
   Gain  Unbalanced output: 0dB; balanced output +6 dB
   Frequency response  20 Hz to 20 kHz, �1 dB
   THD + Noise  0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal level
   S/N  >70 dB at maximum output (unweighted)

Audio input � from MTP input, MTP/HDMI U R � see MLS 608 D's audio output specifications
   Number/signal type  1 set of proprietary analog signals
   Connectors  1 female RJ-45
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu.

Audio output � from MTP input � MTP/HDMI U R
   Number/signal type  2 mono, balanced/unbalanced
   Connectors  (1) 3.5 mm captive screw connector, 5 pole
   Impedance  50 ohms unbalanced, 100 ohms balanced
   Gain error  �1 dB channel to channel

Control/remote � external device (pass-through) � from HDMI input � MTP/HDMI U R
   Serial control port input/output  RS-232 via (1) 3.5 mm, 3 pole captive screw connector
   NOTE     The serial communications link of a MTP/HDMI U R is bidirectional.
   Serial control pin configuration  Captive screw connectors: 1 = Tx, 2 = Rx, 3 = GND

Control/remote � external device (pass-through, unidirectional or bidirectional) from MTP input � MTP/HDMI U R
    NOTE     This port is not used when the MTP/HDMI U R is used with an MLS 608 D Series switcher.
   Serial control port input/output  RS-232 via (1) 3.5 mm, 5 pole captive screw connector (3 poles are used)
   Baud rates  Up to 38400 bps at up to 600' (183 m) (Higher data rates and distances are possible.
Performance varies based on baud rate and cable length.)
   Protocol  Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none
    NOTE     Protocol is mirrored between the transmitter and the receiver.
   Serial control pin configuration  Captive screw connector: 1 = Tx, 2 = Rx, 3 = GND

General � MTP/HDMI U R
   Recommended cable type  Shielded (recommended) or unshielded
      MTP input  CAT 5/5e/6
      HDMI digital input  CAT 5/5e/6, Extron STP201
    NOTE     Shielded twisted pair cable provides added protection from outside interference and increases overall signal transmission distance. Extron strongly recommends using shielded twisted pair for optimal performance.
   Power supply  External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 watts
   Power consumption  9.8 watts
   Temperature/humidity  Storage: -40 to +158�F (-40 to 70�C)/10% to 90%, noncondensing
Operating: +32 to +122�F (0 to +50�C)/10% to 90%, noncondensing
   Cooling  Convention, no vents
   Thermal dissipation  18.1 BTU/hr
   Mounting   
      Rack mount  Yes, with optional 1U rack shelf
      Furniture mount  Yes, with optional under-desk mounting kit
      Pole mount  Yes, with optional projector mounting kit
   Enclosure type  Metal
   Enclosure dimensions  1.7" H x 8.75" W x 3.0" D (half rack wide)
(4.3 cm H x 22.2 cm W x 7.6 cm D)
(Depth excludes connectors.)
   Product weight  0.8 lbs (0.4 kg)
   Shipping weight  13 lbs (6 kg) including MLS 608 switcher
   Vibration  ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance   
      Safety  CE, c-UL, UL
UL rated for use in plenum airspaces: meets UL 2043 for heat and smoke release, excluding the power supply.
      EMI/EMC  CE, C-tick, FCC Class A, ICES, VCCI
   Warranty  3 years parts and labor
    NOTE     All nominal levels are at �10%.
    NOTE     Specifications are subject to change without notice.
 
 
Products
Fiber Optic
FOB I/O 88 HD-SDI
SMX FOX Series
FOX Matrix 3200
FOX Matrix 7200
FOX Matrix 14400
SMX System MultiMatrix
FOX Matrix 320x
Matrix 1K
XTP CrossPoint
Twisted Pair
Modular & Expandable
HDMI
DVI Switchers
SDI/HD-SDI
Ultra-Wideband RGB
Media Presentation
Scaling
VGA & Stereo Audio
AV Matrix Switchers

 

View our Articles on line 2023