| |
3541 Large
Diaphragm Microphone Kit
|
| |
Product
Code:3541Stereo
|
Model:3541
Other Microphones -
Microphone Kits
The 3541 is a complete microphone
kit for all kinds of high quality soloist recordings. It is
specially designed for the demanding requirements of everyday use
in the recording studio where transparency, clarity and brightness
are paramount.
|
|
| |
|
|
| |
|
| |
|
3541 Large Diaphragm Microphone
Kit
-
for all kinds of high
quality soloist recordings
-
highly versatile
modular capsule and preamplifier system
-
high sensitivity and
low self noise
The 3541 is a complete
microphone kit for all kinds of high quality soloist recordings. It
is specially designed for the demanding requirements of everyday
use in the recording studio where transparency, clarity and
brightness are paramount.
The omnidirectional microphone capsule module MMC4041 features
extremely high sensitivity and low self noise. You will experience
total transparency of this microphone no matter if you choose the
high voltage solid state preamplifier MMP4000-S or tube preamplifier MMP4000-T2.
All modules are packed in a convenient carrying case with a shock
mount, a pop filter, windscreen and cable in addition to the
Microphone Amplifier
HMA5000.
A highly cost effective solution for the discerning recording
studio, producer or musician with focus on quality.
|
|
General
Specifications |
| Directional
characteristics: |
Omnidirectional |
| Principle of
operation: |
Pressure |
| Cartridge type: |
24 mm (1 in) condenser w. stainless steel
diaphragm |
| Frequency
range,
± 2 dB: |
10 Hz - 20 kHz with 4 - 6 dB
soft boost at 8 kHz |
| Sensitivity, nominal +/- 2 dB
at 250 Hz: |
Tube preamp.: 85 mV/Pa |
| Equivalent noise level
A-weighted: |
Tube preamp.: Max. 10 dB(A) re.
20 µPa |
| Equiv. noise level ITU-R
BS.468-4: |
Max 22 dB |
| S/N ratio
(A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): |
85 dB |
| Total harmonic distortion
(THD): |
<0.5% up to 120 dB SPL peak, <1% up to 126
dB SPL peak |
| Dynamic
range: |
117 dB |
| Max. SPL, peak before
clipping: |
144 dB SPL peak before
clipping |
| Output
impedance: |
Matches HMA5000
input |
| Cable drive
capability: |
With HMA5000: Up to 300 m (984
ft) |
| Current
consumption: |
2.20 mA |
| Connector: |
Tube preamp: 7-pin modified XLR-M (High
Voltage) |
| Weight: |
190 g (6.7
oz) |
| Microphone length: |
170 mm (6.69 in) |
|
| |
|
|
|
|
|
