| |
4021/22/23
Compact Cardioid
|
| |
Product
Code:40212223
|
Model:4021/22/23
Other Microphones -
Cardioid
The result is the world's
smallest studio quality cardioid condenser microphone, which runs
directly on phantom power with no external preamplifier needed.
Windscreen and suspension mount are included.
|
|
| |
|
|
| |
|
| |
|
4021/22/23 Compact
Cardioid
-
Uniquely natural and
realistic sound
-
Handles extremely high
sound pressure levels
-
Precise and detailed
reproduction
The DPA Compact
Cardioids are phantom powered (P48) condenser microphone using the
same type of cartridge as the famous DPA 4011, but is preamplified
using a built-in ultra-small thick-film mounted
FET-preamplifier.
The result is the world's smallest studio quality cardioid
condenser microphone, which runs directly on phantom power with no
external preamplifier needed. Windscreen and suspension mount are
included.
Three
variants
There are three variants of the DPA Compact Cardioid.
The 4021 has a side-mounted cable, which mechanically is
perfect for situations where the microphone needs to be mounted
directly on the musical instrument or on a stand.
The linear frequency response from 40 Hz to 20 kHz (±2 dB)
together with the ultra-small design makes the 4021 the perfect
choice whenever high definition audio and insignificant size is
paramount.
The 4022 has a rear-mounted cable for situations where the
microphone needs to be suspended from its own cable or mounted on a
stand.
The linear frequency response from 40 Hz to 20 kHz (±2 dB)
together with the ultra-small design makes the 4022 the perfect
choice for all kinds of spot miking situations in TV studios or
concert halls where near invisibility has to go hand in hand with
studio quality audio.
The 4023 has a standard LEMO connector for simple and safe
mounting and removal of the microphone and is designed for usage
together with the elegant and flexible Flamingo Series floor
stands.
The linear on-axis frequency response from 40 Hz to 20 kHz (±2
dB) together with the extremely smooth off-axis response makes the
4023 the optimal choice in live situations in front of both the
non-professional and the professional performer. The Microphone is
supplied with a 3 m (10 ft) cable LEMO to XLR.
|
|
General
Specifications |
| Directional
characteristics: |
Cardioid |
| Principle of
operation: |
Pressure
gradient |
| Cartridge type: |
19 mm (0.75 in) pre-polarised
condenser |
| Frequency
range,
± 2 dB: |
40 Hz – 20
kHz |
| Sensitivity, nominal, ±2
dB: |
8 mV/Pa; -42 dB re. 1 V/Pa |
| Equivalent
noise level A-weighted: |
Typ. 20 dB(A) re. 20
µPa |
| Equiv. noise level ITU-R
BS.468-4: |
Typ. 25 dB (max. 28 dB) |
| S/N ratio,
re. 1 kHz at 1 Pa (94 dB SPL): |
74 dB(A) |
| Total harmonic distortion
(THD): |
<0.5 % THD up to 110 dB SPL
peak, 1% THD up to 116 dB SPL peak |
| Dynamic
range: |
Typ. 96 dB |
| Max. SPL, peak before
clipping: |
145 dB SPL peak |
| Output
impedance: |
<300 ohm |
| Cable drive
capability: |
Up to 100 m (328 ft) after XLR
connector |
| Power
supply: |
48 V Phantom |
| Connector: |
3-pin XLR-M (Standard P48) |
| Weight: |
33 g (1.16 oz) (without
cable) |
| Length: |
30 mm (1.18 in); 71 mm (2.8 in) (incl.
connector) |
| Capsule
diameter: |
19 mm (0.75) |
| Operating temperature
range: |
-40 to +55°C (-40 to
131°F) |
| Cable
length: |
3 m (9.8 ft) |
|
| |
|
|
|
|
|
