DPA Audio

DPA Pro Audio
4012 Cardioid Microphone, 130 V

Home > DPA Pro Audio > Other Microphones > Other Cardioid Microphones > 4012 Cardioid Microphone, 130 V  
 
   4012 Cardioid Microphone, 130 V
 

Product Code:4012
 LaCie d2 Network 2 301504

 Model:4012
 Other Microphones - Cardioid

 The Cardioid Microphone 4012 is a hi-voltage (130 V) condenser microphone with a linear frequency response from 40 Hz to 20 kHz (±2 dB) and an incredible SPL handling capability of 168 dB SPL peak before clipping occurs.

 
 
 
   
 

4012 Cardioid Microphone, 130 V

  • very low distortion

  • handles incredibly high sound pressure levels

  • totally faithful reproduction of the original sound

The Cardioid Microphone 4012 is a hi-voltage (130 V) condenser microphone with a linear frequency response from 40 Hz to 20 kHz (±2 dB) and an incredible SPL handling capability of 168 dB SPL peak before clipping occurs.

Type 4012 is acoustically identical with the popular Type 4011-TL, but differs in the powering method which enables the 4012 to handle these extreme sound pressure levels.

The off-axis characteristics of the 4012 Cardioid Microphone are totally linear, a unique quality which has taken a lot of attention to obtain.

So any leakage that occurs from off-axis sound sources is still a faithful reproduction of these sounds, though attenuated according to the true first order cardioid pick-up pattern.

Holder and windscreen are included.

General Specifications
Directional characteristics: Cardioid
Principle of operation: Pressure gradient
Cartridge type: 19 mm (0.75 in) pre-polarised condenser
Frequency range, ± 2 dB: On-axis: 40 Hz - 20 kHz
Sensitivity, nominal, ±2 dB: 12 mV/Pa; -38 dB re 1 V/Pa
Equivalent noise level A-weighted: Typ. 19 dB(A) re. 20 µPa (max. 20 dB(A))
Equiv. noise level ITU-R BS.468-4: Typ. 25 dB
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 75 dB(A)
Total harmonic distortion (THD): <0.5% up to 110 dB SPL peak, <1% up to 116 dB SPL peak
Dynamic range: Typ. 97 dB
Max. SPL, peak before clipping: 168 dB
Output impedance: Matches HMA5000 input
Cable drive capability: From microphones to HMA5000: Up to 20 m (66 ft), from HMA5000: Up to 300 m (984 ft)
Power supply: 130 V via HMA5000
Connector: 4-pin modified XLR-M (High Voltage)
Weight: 165 g (5.82 oz)
Length: 175 mm (6.89 in)
Capsule diameter: 19 mm (0.75)
Operating temperature range: -40 to +55°C (-40 to 131°F)

     

 

  Other Microphones
 d:facto™ Vocal
 FA4018VDPAB
 FA4018VSL1B
 FA4018VW12B
 FA4018VSE2-ew
 FA4018VSE5
  Cardioid Microphones
  4011-TL Cardioid Microphone P48
  4012 Cardioid Microphone, 130V
  4021/22/23 Compact Cardioid
  Microphone Kits
  Omnidirectional Microphones
  Wide Cardioid Microphones
  Miniatures
  Boundary Layer Microphones
  Miniature Directional Microphones
  Miniature Microphone Kits
  Miniature Omnidirectional Microphones
  Headbands
  4065 Omnidirectional Headband
  4066 Omnidirectional Headband
  4067 Omnidirectional Headband
  4088 Cardioid Headband
  Live Instrument Mics
  4090 Omni Mic, Hi-Sens, P48
  4091 Omni Mic, Low Sens, P48
  4099B Clip Microphone
  4099C Clip Microphone
  4099D Clip Microphone
  4099G Clip Microphone
  4099P Stereo Microphone System
  4099S Clip Microphone
  4099T Clip Microphone
  4099U Universal Clip Microphone
  4099V Clip Microphone
  Reference Standard
  Accessories
  Capsules
  Microphones
  Preamplifiers
  Surround
  Multichannel Solutions
  Surround Matched Microphone Kits
  Accessories
  Adapters
  Accessory Kits
  Acoustic Equalizers
  Amplifiers and Power Supplies
  Cables
  Cases
  Concealers
  Grids
  Headband Booms and Mounts
  Holders and Suspension
  Microphone Summation System
  Preamps and Capsules
  Stands  
  Stereo Booms
  Surround Accessories
  Tape
  Tools 
  Windscreens