DPA d:dicate� ST2011C Stereo Pair with 2011C Compact Cardioids
|
|
Product Code: ST2011C
 |
� Sensitivity selected pair
� Superb stage separation and level control
� Low profile mounting options
� PeliTM Case transportation and protection
The DPA ST2011C is a complete DPA 2011C Stereo Pair with two handpicked cardioid
microphones, selected on sensitivity within �1.5 dB making several stereo
principles like XY and ORTF easy to obtain.
The compact design and controlled directionality of our versatile 2011Cs make
them an excellent choice for spot mics for classical recording and on-stage
close mics for live sound.
The foam design in the heavy-duty transportation box allows for fast and easy
exchange of microphone/accessory inlays.
Included in this kit
Two carefully matched 2011C cardioid microphones, sturdy PeliTM case, holders,
grids and windscreens. |
|
Directional
characteristics: |
Cardioid |
|
Principle of
operation: |
Pressure gradient, with interference tube |
|
Cartridge type: |
Pre-polarized condenser, Twin Diaphragm Capsule |
|
Frequency range: |
20 Hz - 20 kHz |
|
Frequency
range,
± 2 dB: |
50 Hz - 17 kHz with typ. 3 dB soft boost at 12 kHz |
|
Sensitivity, nominal+/- 2 dB at 1KHz: |
10 mV/Pa; -40 dB re.
1 V/Pa |
|
Equivalent
noise level A-weighted: |
Typ. 20 dB(A) re. 20
�Pa (max. 23 dB(A)) |
|
Equiv. noise level ITU-R
BS.468-4: |
Typ. 33 dB (max. 36
dB) |
|
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): |
Typ. 74 dB(A) |
|
Total harmonic distortion
(THD): |
<1% up tp
137 dB SPL peak |
|
Minimum load impedance: |
2 kohm |
|
Dynamic
range: |
Typ. 117 dB |
|
Max. SPL, peak before
clipping: |
146 dB |
|
Output
impedance: |
<200 ohm |
|
Output balance principle: |
Impedance balancing
with Active Drive |
|
Cable drive
capability: |
100 m (328 ft) |
|
Common Mode Rejection Ratio (CMRR): |
> 50 dB |
|
Power
supply: |
48 V Phantom power (� 4 V) |
|
Current consumption: |
2.8 mA |
|
Connector: |
XLR-3M. Pin 1:
shield, Pin 2: signal + phase, Pin 3: - phase |
|
Color: |
Matte black |
|
Weight: |
64 g (2.3 oz) |
|
Diameter: |
19 mm (0.75 in) |
|
Length: |
92 mm (3.6 in) |
|
Output voltage, RMS: |
> 4 V |
|
Polarity: |
+V at Pin 2 for
positive sound pressure |
|
Operating temperature
range: |
-40 �C to 45 �C (-40
�F to 113 �F) |
|
Relative Humidity (RH): |
Up to 90 % |
|
Sensitivity selection tolerance (at 1 kHz): |
� 1.5 dB |
|
|
|
|
|
