The new 100UPR receiver features twin-antennas a
3.5mm -58dbB balanced mic level output jack a 3.5mm monitor output
jack (with level control) a recessed On/Off switch a Power On/
Signal Received LED and channel selectors to set the desired
frequency. Using crystal-control and PLL synthesis the 100UPR
operates for better than 8 hours on a single 9V battery. The
receiver comes with a "hot-shoe" mount, hook-and-loop mounting tape
and a 3.5mm to 3.5mm output cable (Azden's MX-1 3.5mm - to - XLR
cable is optional).
Technical Specs:
Frequency Range: UHF 63-Channel Selectable (793.750-805.875MHz)
Type of Reception: Antenna Diversity
Oscillator: PLL Synthesized
RF Squelch Level: 16dBµV
Frequency Response: 50Hz -15kHz
S/N Ratio: >70dB "A" Weighted
Audio Distortion: <1% @ 1kHz
Operating Temp: 0°C –50°C (32°F
-122°F)
MIC Out (Balanced): –58dBm @ 600 Ω
Monitor Out: –10dBm (Max) @ 33 Ω
MIC Out Connector: 3.5mm Balanced Mini-Jack
Monitor Out Connector: 3.5mm Stereo Mini-lack
Power Requirement: 1- 9V Alkaline Battery
Battery Life: 6 - 8 Hours w/Alkaline Battery
Dimensions: 62W x 100H x 22D mm (2.44W x 3.94H x 0.87D inches)
Weight: Approx. 120g Including Battery (4.23oz)
|