AKG Pro Audio

AKG Pro Audio
CBL 99 Gooseneck Microphones

AKG Pro Audio

Homepage

Azden Sound Devices Sennheiser Tascam Yamaha  JBL  Mackie Projector Monitor Tapes E-Shop Contact us Email us Visit Us
Home > AKG Pro Audio > Gooseneck Microphones > 99er Series > CBL 99  
 
  Installed  
  Gooseneck Microphones
     Modular Series
     99er Series
         CGN 99 C/S (C/L)
         CGN 99 H/S (H/L)
       CHM 99
       DGN 99/DGN 99 E
       DST 99 S
       CBL 99
       CK 99 L
     Architectural Series
  Hanging Microphones
  Paging Microphones
  Boundary Layer & Shotgun Microphones
  Crown Microphones
  Conference Systems
  Automixer
  Recording
  Recording Microphones
  Recording & Broadcast Microphones
  ULS Series
  AKG Blue Line
  Perception
  USB Microphones
  Stage
  Handheld Microphones
  Instrument Microphones
  Clip-on Microphones
  Head-worn Microphones
  Crown Microphones
  Lavalier Microphones
  Wireless
  Digital Wireless Microphones Systems
  Analog Wireless Microphones Systems
  In-ear Monitoring Systems
  HiQnet
  Headphones
  Professional Headphones
  Headsets
  Accessories
  AC Power Supplies
  Adapters
  Battery Power Supplies
  Cables
  Carrying Cases And Bags
  Goosenecks
  Microphone Stands
  Rack Mount Units
  Stand Adapters
  Suspensions And Clamps
  Windscreen And Pop Filters
  Miscellaneous
CBL 99

AKG Pro Audio
Product Code:
cbl99
 LaCie d2 Network 2 301504

The CBL 99 is a high-quality boundary microphone designed to deliver superior results for a multitude of recording applications. The boundary layer technique is well-known for recording and offers non-directional pickup that is frequencyindependent.

Succeeding the proven CBL 99, the CBL 99 is small, lightweight and easy to place . no stand is needed. Since the transducer sits in a metal plate only 5 mm (0.2 in) thick, the plate doesn’t interfere with or color the sound. Frequency response is very uniform within its hemisphere and it captures the “room sound’’ of an instrument very accurately.

The CBL 99 can be permanently attached to the floor or wall of a studio using the screw holes in the plate or attached temporarily using the supplied adhesive compound. Its 3-pin output connector also has a switchable bass-cut filter to minimize surface-born noise.

Easy to use and sonically versatile, the CBL 99 is a great addition to the “mic locker’’ of any studio.


CBL99 Features
  • Extremely small and inconspicuous, lightweight yet rugged
  • Delivers superior sound combined with outstanding ease of use
     
  • High sensitivity and low self-noise ensures generous headroom

CBL99 Specifications
  • Polar pattern:  Omnidirectional(hemispherical)
  • Frequency range: 20Hz to 20kHz
  • Sensitivity: 20 mV/PA (-34 dBV)
  • Max. SPL: 130 dB (for 1% THD)
  • Equivalent noise level (IEC 60268-4) : 16 dB
  • Signal/noise ratio (A-weighted): 78 dB
  • Impedance: <600 ohms
  • Recommended load impedance: >=2,000 ohms
  • Bass filter: switchable flat or 150 Hz,12 dB/octave
  • Supply voltage: 9 to 52 V phantom power to IEC 61938
  • Powering: <2 mA
  • Connector: 3-pin male XLR
  • Finish: matte black
  • Net weight: 56 g ( 2 oz.) (without cable)

CBL99 Standard Accessories

  • Adhesive compound

 

 
   
 
 

Read our blogs