AKG Pro Audio

AKG Pro Audio
C 747 V11
Boundary layer & Shotgun
Microphones

AKG Pro Audio

Homepage

Azden Sound Devices Sennheiser Tascam Yamaha  JBL  Mackie Projector Monitor Tapes E-Shop Contact us Email us Visit Us
Home > AKG Pro Audio > Boundary layer & Shotgun Microphones > C 747 V 11  
 
  Installed  
  Gooseneck Microphones
  Hanging Microphones
  Paging Microphones
  Boundary Layer & Shotgun Microphones
  C 747 V11
  C 547 BL
  CBL 99
  C 562 CM
  C 568 B
  Crown Microphones
  Conference Systems
  Automixer
  Recording
  Recording Microphones
  Recording & Broadcast Microphones
  ULS Series
  AKG Blue Line
  Perception
  USB Microphones
  Stage
  Handheld Microphones
  Instrument Microphones
  Clip-on Microphones
  Head-worn Microphones
  Crown Microphones
  Lavalier Microphones
  Wireless
  Digital Wireless Microphones Systems
  Analog Wireless Microphones Systems
  In-ear Monitoring Systems
  HiQnet
  Headphones
  Professional Headphones
  Headsets
  Accessories
  AC Power Supplies
  Adapters
  Battery Power Supplies
  Cables
  Carrying Cases And Bags
  Goosenecks
  Microphone Stands
  Rack Mount Units
  Stand Adapters
  Suspensions And Clamps
  Windscreen And Pop Filters
  Miscellaneous
C 747 V11

AKG Pro Audio
Product Code:
c747v11
 LaCie d2 Network 2 301504

As it is more and more used in conference applications, we carefully redesigned the C 747 to better cope with some specific installed sound issues. 
The new C 747 V11 will have an integrated RFi shield to block out unwanted interference by mobile phones, wireless mics and the like. Also we have fine tuned the frequency response to give especially the spoken word an outstanding presence, without changing the flavour of the classic C 747 sound.

An enhanced polar pattern provides consistent off-axis rejection to control ambient noise and feedback in acoustically difficult environments. This makes the C 747 V11 an excellent choice for noisy discussion groups or reverberant pulpits while it is forgiving enough to clearly pick up talkers moving around in front of the microphone. A switchable LF roll-off filter suppresses mechanical noise. The low-impedance transformerless preamp operates on 9 to 52 V phantom power. 
The C 747 V11 ships with an extensive accessory set including a shock mount/adapter, mini gooseneck, stand adapter, mounting clamp, thread link, and windscreen.


C747V11 Features
  • Immune to RF interference
  • Speech optimized frequency range
  • Enhanced hypercardioid polar pattern
  • High SPL capability
  • Premium microphone for ubiquitous application

C747V11 Specifications
  • Polar pattern: hypercardioid
  • Frequency range: 30 to 18,000 Hz
  • Sensitivity: 8.5 mV/Pa (-42 dBV)
  • Max. SPL: 133 dB
  • Equivalent noise level (CCIR 468-3): 32 dB
  • Equivalent noise level: 21 dB-A
  • Signal/noise ratio (A-weighted): 73 dB
  • Bass filter: 12 dB/octave at 150 Hz
  • Impedance: 400 ohms
  • Recommended load impedance: >1500 ohms
  • Supply voltage: 9 to 52 V phantom power to DIN 45596
  • Powering: <2 mA
  • Connector: 3-pin XLR
  • Cable: 3 m (10 ft.)
  • Finish: stage blue
  • Net weight: 25 g / 0.9 oz.
  • Shipping weight: 750 g / 1.7 lbs.

C747V11 Standard Accessories

  • H 47, Shock mount
  • MSH 70, Gooseneck
  • SA 47 ,Stand adapter
  • SA 80, Stand adapter
  • SHZ 80, Slotted screw
  • Windscreen

 
 

Read our blogs