|
|
| GN 15 (30,50)
E |
|
|
-E.jpg)
Product Code: gn153050e
|
All E-Series modules come with an integrated connector for
quick setup and takedown. The goosenecks are available in various
lengths. GN 15 E: 23.5 cm (9.2 in.); GN 30 E: 38 cm (15 in.); GN 50
E: 57.2 cm (22.3 in.). Of course the series also has an integrated
200 Hz bass rolloff filter and LED ON/OFF jumper.
Optimum suppression of structure-borne noise
An essential feature of the installation hardware described below
is the attenuation of structureborne noise that prevents the
transmission of unwanted noise (footfall etc.). The amount of
attenuation is determined by the material mix of the rubber shock
mount. Modular Series installation modules usea mixture that is
extremely efficient at frequencies below 200 Hz (e.g., knocking
noise). Unlike standard rubber mixturees that respond to vibrations
very slowly, the special AKG rubber mixture absorbs vibrations
practically immediately. This prevents successive shocks from
adding up. This rubber mixture is used in the H 600 and H
500.
|
|
| GN15(30,50)E
Features |
- Rugged construction
- Highly reliable contacts for capsule
modules
- Integrated LED ring status
indicator
|
- Integrated, switchable bass
cut
- Integrated XLR connection
|
|
| GN15(30,50)E
Specifications |
- Bass filter: 250 Hz, -10 dB at 50 Hz
- Impedance: <=600 ohms
- Recommended load impedance: >=2,000 ohms
- Supply voltage: 9 to 52 V phantom power to DIN/IEC
- Powering: <3 mA
- Connector: 3-pin male XLR
|
- Finish: matte dark grey
- Net weight: GN 15 E: 112 g (3.9 oz.), GN 30 E: 160 g (5.6
oz.), GN 50 E: 160 g (5.6 oz.)
- Shipping weight: GN 15 E: 396 g (13.9 oz.), GN 30 E: 530 g
(18.7 oz.), GN 50 E: 535 g (18.8 oz.)
|
|
|
GN15(30,50)E Standard
Accessories
|
|
|
- PS 3 F-Lock, Installation
hardware
|
|
|
|
