Audio Technica U891RCX Cardioid Condenser Boundary Microphone

Audio Technica U891RCX
Audio Technica U891RCx

Audio Technica U891RCX Cardioid Condenser Boundary Microphone with Local/Remote Switch

Product Code: U891RCX

Buy Sell Sales Audio Technica U891RCX


Features
• Designed for surface-mount applications
• Three operating modes: “touch-on/touch-off,” “touch-to-talk” and “touch-to-mute”
• External contact closure capability
• External LED control allows for accurate depiction of the live status of the microphone
• UniGuard® RFI-shielding technology
• Improved switch design

A wide range condenser microphone with a cardioid polar pattern, the U891RCx is equipped with local or remote switching options. For flexible control in conference and boardroom installations, the unit’s external contact closure ability allows a user to trigger an external device—a camera, for instance—from a switch on the microphone. Another ease-of-use feature: the microphone’s activation switch can be set to three operating modes: touch-on/touch-off, press to talk, and press to mute. The mic is also equipped an 80 Hz low-cut UniSteep® filter to reduce pickup of low-frequency ambient noise. Its red LED status indicator can be controlled remotely. UniGuard® innovations offer unsurpassed immunity from radio frequency interference; interchangeable elements are available in cardioid, hypercardioid and omnidirectional polar patterns; a unique rotating PivotPoint® connector changes the cable exit point—no tools required. It requires 11 to 52V DC phantom power, which operates the microphone and switch circuitry.

Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern Half-cardioid (cardioid in hemisphere above mounting surface)
Frequency Response 30 - 20,000 Hz
Open Circuit Sensitivity -34 dB (19.9 mV) re 1V at 1 Pa
Impedance 200 ohms
Maximum Input Sound Level 130 dB SPL, 1 kHz at 1% T.H.D.
Low Frequency Roll Off 80 Hz, 18 db/octave
Switches Activation: on/off; Switch function: press
on/off, momentary on, momentary off;
Control: local, remote, LED remote; Flat,
roll-off
Dynamic Range 104 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 68 dB, 1 kHz at 1 Pa
Phantom Power Requirements 11-52V DC, 4 mA typical
Weight 264 g
Dimensions 4.25" (108.0 mm) long, 3.31" (84.0 mm) maximum width, 0.91" (23.0 mm) height
Output Connector TB5M type
Cable 25.0' (7.6 m) long, 0.13" (3.2 mm) diameter, 5-conductor shielded cable with TA5F-type connector at microphone end, output end stripped and tinned for connection to electronic device
Accessories Included Soft protective pouch