Audio Technica U853PMWU UniLine Condenser Hanging Microphone, White

Audio Technica U853PMU
Audio Technica U853PMU

Audio Technica U853PMWU UniLine Condenser Hanging Microphone, White

Product Code: U853PMWU

Buy Sell Sales Audio Technica U853PMWU


Features
• Designed for suspension over choirs, instrumental groups and theater stages
• Wall/ceiling plate power module permits permanent installation in standard metal U.S. single gang electrical box
• UniLine® polar pattern provides narrow 90° acceptance angle
• Superior off-axis rejection for maximum gain before feedback
• UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
• UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
• Accepts interchangeable elements to permit angle of acceptance from 90° to 360°
• Low-profile design with low-reflectance finish for minimum visibility
• Available in two colors: black (U853PMU) and white (U853PMWU)

The white-finished version of U853PMU, the U853PMWU UniLine condenser hanging microphone features Audio-Technica’s UniLine® line-cardioid element and comes equipped with a wall/ceiling plate power module for permanent installation in a standard, single-gang electrical box. The phantom-powered microphone is equipped with UniGuard® innovations that offer unsurpassed immunity from radio frequency interference. It accepts interchangeable elements, available in cardioid, hypercardioid, omnidirectional and UniLine™ line cardioid polar patterns. Its 80 Hz low-cut UniSteep® filter reduces pickup of low-frequency ambient noise.

Element Fixed-charge back plate, Permanently polarized condenser
Polar Pattern Line Cardioid
Frequency Response 30 - 20,000 Hz
Open Circuit Sensitivity -35dB (17.7 mV) re 1V at 1 Pa
Impedance 200 ohms
Maximum Input Sound Level 124 dB SPL, 1 kHz at 1% T.H.D.
Low Frequency Roll Off 80 Hz, 18 db/octave
Switches Flat, roll-off
0 dB/+10 dB gain setting
Dynamic Range 102 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 72 dB, 1 kHz at 1 Pa
Phantom Power Requirements 11-52V DC, 4 mA typical
Weight Microphone: 30 g
Power module: 97 g
Dimensions Microphone: 6.14" (156.0 mm) long, 0.48" (12.2 mm) diameter
Power module: 2.80" (71.0 mm) W x 4.55" (115.5 mm) H x 1.42" (36.0 mm) D
Output Connector (Power module) Screw Terminals
Cable 25.0' (7.6 m) long (permanently attached to microphone), 0.13" (3.2 mm) diameter, 2 conductor shielded cable with TA3F-type connector
Accessories Included AT8154 two-stage foam windscreen; AT8451 steel hanger; AT8534 wall/ceiling plate power module; AT8438 5/8"-27 stand adapter