Audio Technica ES905CL Cardioid Rigid-pipe Condenser Microphone

Audio Technica ES905CL
Audio Technica ES905CL

Audio Technica ES905CL Cardioid Rigid-pipe Condenser Microphone

Product Code: ES905CL
Buy Sell Sales Audio Technica ES905CL

review button

Features
• Designed for high-quality sound reinforcement and professional recording
• Low-profile element provides uniform cardioid polar pattern
• Rigid-pipe design with ball-in-socket base permits flexible positioning
• Sturdy metal base mounts to table, desk or podium with included hardware
• Superior off-axis rejection for maximum gain before feedback
• Requires 11V to 52V DC phantom power

The ES905CL is designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications. Its rigid-pipe design with ball-in-socket base permits flexible positioning, while its durable metal base mounts to a table, desk or podium with included hardware. The attached wire mesh windscreen with internal pop protection effectively reduces noise from P-pops, wind, and ventilation air currents. The microphone offers unsurpassed immunity from radio frequency interference thanks to UniGuard® innovations. The ES905CL also offers an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise. The microphone's low-profile element provides a uniform cardioid polar pattern with a 120º acceptance angle. Power module included.

Element Fixed-charge back plate, Permanently polarized condenser
Polar Pattern Cardioid
Frequency Response 60 - 20,000 Hz
Open Circuit Sensitivity -38dB (12.5 mV) re 1V at 1 Pa
Impedance 250 ohms
Maximum Input Sound Level 138 dB SPL, 1 kHz at 1% T.H.D.
Low Frequency Roll Off 80 Hz, 18 db/octave
Switches Flat, roll-off
Dynamic Range 111 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 67 dB, 1 kHz at 1 Pa
Phantom Power Requirements 11-52V DC, 2 mA typical
Weight Microphone: 330 g (11.6 oz)
Power Module : 81 g (2.9 oz)
Dimensions Microphone : 523.4 mm (20.61") long - 24.6 mm (0.97") head diameter
Power Module : 92.9 mm (3.66") long, 18.9 mm (0.74") diameter
Output Connector Integral 3-pin XLRM-type (Power module)
Cable 2.9 m (9.5') long, (permanently attached to microphone) 3.2 mm (0.13") diameter, 2-conductor, shielded cable terminated with TA3F-type connector
Accessories Included AT8538 power module; (3) #8 x 1" black oxide wood screws for microphone mount