WPN-12

KRAMER UXGA Video Receiver

Expandore Singapore
Home > Main > WP - Active Devices > WPN-12

WPN-12, UXGA Video Receiver WPN12


 
 

 

A unique wall plate combination with which a single multicore VGA/UXGA cable can transmit graphics or video signals (Composite, Y/C, Component, HD etc.) over the built-in coax cable in the graphics cable. Usually used with the WPN-11 transmitter.
 

 
PRODUCTS
WP - Active Devices
WA-20 WP-220
WA-21 WPN-11
WA-22 WPN-12
WA-23 WV-11
WP-110 WV-12
WP-210 WV-20
WP-210A
 
Distribution Amplifiers
Switchers & Matrix Switch.
PAGE 1
PAGE 2
Video - Audio Processors
Interfaces & Sync. Process
Twisted-Pair Interfaces
Acc & Rack Adaptors
Scan Converters & Scalers
WP-Passive Devices
WP-Active Devices
 
SPECIFICATION
INPUTS: WPN 11: 1 XGA on an HD15F connector; 1 composite video 1 Vpp/75Ω, 1 s Video, 1 Vpp/75Ω (Y), 0.3Vpp/75Ω (C), YUV / RGB (on RCA connectors); WPN 12: INPUT FROM LINE on terminal block connectors
OUTPUTS: WPN 11: OUTPUT TO LINE on terminal block connectors; WPN 12: 1 XGA on an HD15F connector; 1 composite video 1 Vpp/75Ω, 1 s Video, 1 Vpp/75Ω (Y), 0.3Vpp/75Ω (C), YUV / RGB (on RCA connectors)
MAX. OUTPUT LEVEL: 2.6Vpp
BANDWIDTH (-3dB) : 450MHz, Fully Loaded
DIFF. GAIN: 0.05%
DIFF. PHASE: 0.05 Deg.
K-FACTOR: <0.05%
S/N RATIO: 74dB
CROSSTALK (all hostile): –56dB
COUPLING: DC
POWER SOURCE: 12 VDC, 110mA
DIMENSIONS: 6.9cm x 4.3cm x 11.4cm (2.72" x 1.70" x 4.49", W, D, H)
WEIGHT: 0.3 kg (0.67 lbs.) approx
ACCESSORIES: Power supply
OPTIONS : BC-5X5S Cable
 

 

 
   

Read our blogs