704

KRAMER Video Line Receiver

Expandore Singapore
Home > Main > Twisted-Pair Interfaces > 704

704, Video Line Receiver 



 

 

The Kramer 705 is a high performance composite video to twisted pair transmitter, and the 704 is its companion unit which converts the twisted pair format back to composite video. Transmission via twisted pair cable carries video signals farther than conventional coax cable, and is lighter and significantly less expensive. A simple system consists of a 705 located at the video source, and a 704 located at the remote display device. For systems with multiple monitors, the 704 receiver has a loop out and termination switch allowing several 704 receivers to be placed on the same TP cable driven by a 705. Even at a cable length of 400 meters, the frequency response is well over 6 MHz and at shorter distances, they provide close to broadcast level performance. Recessed gain and equalization controls are provided to optimize signal levels. A 12V power supply is provided with each unit. The 705 and 704 are part of the Kramer TOOLS family of compact, high quality, and cost effective solutions for a variety of applications.

Typical Applications:

  • Remote monitoring for CCTV, medical, schools, broadcast applications.

  • Ideal for existing facilities with TP cable already installed

  • Teleconferencing in offices and hospitals using existing intercom or telephone wiring

 

SPECIFICATIONS

 
INPUTS: 1 looping balanced 150Ω on 6/4 standard telephone sockets, with termination switch and polarity inversion switch  
OUTPUT: 1 composite video, 1 Vpp/75Ω unbalanced on a BNC connector.75Ω unbalanced on a BNC connector.  
BANDWIDTH (-3dB): 50 MHz. at 30 meters, 6.0 MHz. at 400 meters.  
NON-LINEARITY: 0.2% at 100 meters.  
DIFF. GAIN (PAIR): 0.43%.  
DIFF. PHASE (PAIR): 0.32 Deg.  
K-FACTOR(@ 400m): 1.6%  
S/N RATIO: 74 dB.  
COMPENSATION: Gain and HF above 2.5MHz +/- 9dB.  
SYSTEM DELAY: 1 microsecond TYP. at 100 meters.  
POWER SOURCE: 12 VDC 40mA.  
DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”, W, D, H.).  
WEIGHT: 0.28 kg. (0.62 lbs.). approx.  
ACCESSORIES: Power supply, mounting bracket.  
OPTIONS: RK-T1, RK-T3, 19 inch rack adapters.  
     

 

PRODUCTS
Twisted-Pair Interfaces
704 TP-100
707 TP-104
708 TP-120
709 TP-1XL
710 TP-200
703XL TP-2XL
705XL TP-300FW
706XL TP-400FW
711XL TP-41
712XL TP-42
PT-110 VP-200XLT
 
Distribution Amplifiers
Switchers & Matrix Switch.
PAGE 1
PAGE 2
Video - Audio Processors
Interfaces & Sync. Process
Acc & Rack Adaptors
Scan Converters & Scalers
WP-Passive Devices
WP-Active Devices
 
   

Read our blogs