The Extron Matrix 3200
Series Matrix Switchers are
solutions for large scale
routing applications that
require up to 32 inputs and
32 outputs. With
user-friendly control via
the front panel, MKP 1000
remote keypad, or MCP 1000
Master Control Panel, the
Matrix 3200 matrix switchers
provide totally customizable
and modular switching of
composite video, S-video,
component video, RGsB, RGBS,
RGBHV, and one or two
channel audio. With an RGB
bandwidth of 430 MHz (-3dB)
fully loaded, the Matrix
3200 Wideband Series can
maintain the integrity of
any routed signal.
The Matrix 3200 matrix
switchers include
configurations of wideband,
low resolution video, sync,
and stereo or mono audio
models. Each model allows
for 16x8 switching with the
flexibility to upgrade to
full 32x32 routing
applications. With 64 BNC
connectors on the rear panel
and modular internal card
slots ready to be filled as
needed, the Matrix 3200
matrix switchers can grow to
accommodate any system —
even systems that are still
expanding.
Rooming Presets and
Virtualization
Using a feature called
"rooming," each Matrix 3200
matrix switcher can be
programmed to group multiple
outputs to specific rooms,
allowing them to have their
own presets. Each room can
consist of up to 16 signals
and each matrix can support
up to 10 rooms. A total of
100 room presets are
available, providing added
flexibility and convenience,
particularly in systems
where switching is required
between several locations.
Once a room has been
configured and stored, it is
switched independently of
other rooms so that signals
sent to one room will never
walk in on another room.
Rooming is made possible by
user-defined virtual maps,
which ascribe "locality" to
the physical inputs and
outputs of the Matrix 3200
matrix switchers. Virtual
mapping makes it possible to
configure the switchers in
unique ways, dictated by
each virtual input/output ,
i.e., the assignment of each
individual connector, and
each group of connectors,
called a virtual plane. The
Extron
virtualization/control
software makes these
configurations possible. The
software easily translates
the appropriate virtual map
into the switcher's memory
with minimal effort on the
part of the installer.
Rooming presets go beyond
normal matrix switching
capabilities, which are
offered with the Matrix 3200
matrix switchers as global
presets. These global
presets can be set to define
configurations of specific
inputs to any specific
combination of outputs or to
all outputs. Rooming presets
and global presets can be
programmed and recalled at
the front panel or by
remote.
FPC 1000, MKP 1000, and
MCP 1000
With the Matrix 3200 Series
control options, controlling
any system is easy. RS-232
and RS-422 control and
programming is easy and
quick with Extron's SIS™ -
Simple Instruction Set. |
• Inputs: Video on female
BNC connectors; audio on
captive screw connectors
• Outputs: Video on female
BNC connectors; audio on
captive screw connectors
• 430 MHz (-3 dB) RGB video
bandwidth, fully loaded
(wideband models) — Ensures
switching and distribution
of signals without signal
degradation. The 430 MHz (-3
dB) rating is a worst case
specification, i.e., the
Matrix 3200 matrix switchers
provide 430 MHz (-3 dB) at
full performance capacity
when one input signal drives
all outputs.
• 150 MHz (-3 dB) video
bandwidth, fully loaded (low
resolution models) — Ensures
switching and distribution
of signals without signal
degradation. The 150 MHz (-3
dB) rating is a worst case
specification, i.e., the
Matrix 3200 matrix switchers
provide 150 MHz (-3 dB) at
full performance capacity
when one input signal drives
all outputs.
• Compatible with composite
video, S-video, component
video, HDTV, RGsB, RGBS,
RGBHV, and/or
balanced/unbalanced mono or
stereo audio
• Field upgradeable and
modular design — The Matrix
3200 matrix switchers
provide the highest level of
cost-effectiveness,
flexibility, and
expandability by allowing
users to purchase only the
modules required for their
systems. Additional modules
may be added at any time
without having to send the
unit back to the factory for
expansion or application
change.
• 100 rooming memory presets
— Provides presets for up to
10 rooms for a total of up
to 100 rooming presets for
added flexibility and
control in routing signals.
• Triple-Action Switching™
for RGB delay — The Matrix
3200 matrix switchers are
capable of programmable RGB
delay on every output. This
allows for blanking of RGB
signals when switching
multiple inputs/outputs.
When switching, all
projectors/monitors will
display black instead of a
scrambled image.
• Easy-to-use FPC 1000 LCD
Front Panel Controller — The
FPC 1000 has a large LCD
window that allows direct
access and total control
over all presets and
switching functions. Menus
in the FPC 1000 provide an
intuitive interface for easy
setup and programming.
• 32 global presets — The
Matrix 3200 matrix switchers
can be configured for
several different
applications without the
need for changing the
settings each time the
application changes.
• Vertical interval
switching — Enables smooth,
seamless transitions when
switching between inputs.
• Input and output
connectors are clearly
labeled — All connectors are
clearly labeled for easy
installation. With the
Extron
virtualization/control
software, a visual map can
be printed for easy
representation of the
virtual I/Os. This feature
reduces the time required
for setup and programming.
• RS-232 and RS-422 control
port — Using serial
commands, the Matrix 3200
Series can be controlled and
configured via the included
Windows-based control
software, or integrated into
a control system. Extron
products use the SIS™ -
Simple Instruction Set
command protocol, a set of
basic ASCII code commands
that allow for quick and
easy programming.
• Extron
virtualization/control
software — Extron has
developed a Windows®- based
software that provides the
ability to mix and match
inputs to outputs. This
program, shipped with every
Matrix 3200 matrix switcher,
makes I/O configuration
simple because it uses
graphic icons and icon
labeling capabilities. More
importantly, the software
also allows users to
configure the switcher via
an emulation mode even if
the switcher is not
available. Once the matrix
is built with the software
and the configuration is
saved, the switcher is ready
to operate.
• Optional control panels
and keypads — Provide the
flexibility to control a
Matrix 3200 Series matrix
switcher from a remote
location.
• RGB and audio mute
• Balanced or unbalanced
mono or stereo audio — The
Matrix 3200 matrix switchers
offer the flexibility for
both balanced or unbalanced
audio signals. Depending on
the application and cable
distance requirements, some
systems will require
balanced audio.
• Audio input gain and
attenuation — The Matrix
3200 matrix switchers allow
users to set the level of
audio from front panel
controls or RS-232 and
RS-422, whether for gain or
attenuation, -15 dB to +9
dB.
• Audio breakaway — With
breakaway switching, the
Matrix 3200 matrix switchers
can separate the audio
signal from the video signal
to switch either video only
or audio only. The breakaway
feature allows audio follow
on any one or all channels,
or can be operated as a
separate audio matrix.
• Trouble status indication
— The Matrix 3200 matrix
switchers track status
indicators at all times, and
with the FPC 1000, the
installer can monitor RS-232
and RS-422 communications
from and to the unit. This
saves valuable time in
troubleshooting.
• Front panel security
lockout — If a Matrix 3200
matrix switcher is installed
in an unsecured environment,
an optional password feature
can be implemented. When
this feature is in use, a
password is required to
operate the front panel
controller.
• Rack-mountable metal
enclosure — The Matrix 3200
matrix switchers are
rack-mountable in any
conventional 19-inch rack
using included hardware.
• Highly reliable,
energy-efficient internal
universal power supply — The
100-240 VAC, 50/60 Hz,
international power supply
provides worldwide power
compatibility with high
demonstrated reliability.
• Optional redundant power
supply — An additional power
supply may be internally
mounted to give the Matrix
3200 matrix switchers a
backup power supply. This
feature may be necessary in
critical applications where
power reliability is a
crucial factor. |
|
Video — wideband video
BME |
|
Routing |
16 x 8 or larger matrix
up to 32 x 32 or 64 x
64, depending on model
and configuration |
|
Gain |
Unity |
|
Bandwidth |
|
Matrix
Wideband |
430 MHz (-3 dB), fully
loaded |
|
0 - 10
MHz |
No more than +0.1 dB to
-0.1 dB |
|
0 - 130
MHz |
No more than +4 dB to
-0.25 dB |
|
Phase between
I/Os |
<1.28° at 3.58 MHz |
|
Differential
phase error |
0.1%, 3.58 MHz and 4.43
MHz |
|
Differential
gain error |
0.1°, 3.58 MHz and 4.43
MHz |
|
Max.
propagation of delay |
5 ns typical (±1 ns) |
|
Crosstalk |
-80 dB @ 1 MHz, -62 dB @
10 MHz, -52 dB @ 30 MHz |
|
Switching
speed |
200 ns (max.) |
|
Video — low resolution
video BME |
|
Routing |
16 x 8 or larger matrix
up to 32 x 32 or 64 x
64, depending on model
and configuration |
|
Gain |
Unity |
|
Bandwidth |
|
Matrix Low
Res |
150 MHz (-3 dB), fully
loaded
0 MHz to 10 MHz: no more
than +0.1 dB to -0.1 dB
0 MHz to 30 MHz: no more
than +0.5 dB to -0.5 dB |
|
Crosstalk |
80 dB @ 1 MHz, -62 dB @
10 MHz, -52 dB @ 30 MHz |
|
Switching
speed |
200 ns (max.) |
|
Video input — wideband
video BME |
|
Number/signal
type |
Up to 32 or 64 (varies
with configuration)
RGBHV, RGBS, RGsB,
RsGsBs, component video,
S-video, composite video |
|
Connectors |
Female BNC (quantity
varies with
configuration) |
|
Nominal level |
1 Vp-p for Y of
component video and
S-video, and for
composite video
0.7 Vp-p for RGB and for
R-Y and B-Y of component
video
0.3 Vp-p for C of
S-video |
|
Minimum/maximum
levels |
Analog: 0.5 V to 1.5
Vp-p with no offset |
|
Impedance |
75 ohms |
|
Return loss |
-30 dB @ 5 MHz |
|
Video input — low
resolution video BME |
|
Number/signal
type |
Up to 32 or 64 (varies
with configuration)
RGsB, RsGsBs, component
video,
S-video, composite
video, HDTV |
|
Connectors |
Female BNC (quantity
varies with model) |
|
Nominal level |
1 Vp-p for Y of
component video and
S-video, and for
composite video
0.7 Vp-p for RGB and for
R-Y and B-Y of component
video
0.3 Vp-p for C of
S-video |
|
Minimum/maximum
level |
Analog: 0.5 V to 1.5
Vp-p with no offset |
|
Impedance |
75 ohms |
|
Return loss |
-30 dB @ 5 MHz |
|
External sync
(genlock) |
0.3 V to 12 Vp-p, 75
ohms |
|
Video output — wideband
video BME |
|
Number/signal
type |
Up to 32 or 64 (varies
with configuration)
RGBHV, RGBS, RGsB,
RsGsBs, component video,
S-video, composite video |
|
Connectors |
Female BNC (quantity
varies with
configuration) |
|
Nominal level |
1 Vp-p for Y of
component video and
S-video, and for
composite video
0.7 Vp-p for RGB and for
R-Y and B-Y of component
video
0.3 Vp-p for C of
S-video |
|
Maximum level |
2 Vp-p |
|
Impedance |
75 ohms |
|
Return loss |
-25 dB to input section
up to 50 MHz |
|
DC offset |
±10 mV typical with
input at 0 offset |
|
Switching type |
Triple-Action™ |
|
Slew rate |
>200 V/ms |
|
Video output — low
resolution video BME |
|
Number/signal
type |
Up to 32 or 64 (varies
with configuration)
RGsB, RsGsBs, component
video,
S-video, composite
video, HDTV |
|
Connectors |
Female BNC (quantity
varies with
configuration) |
|
Nominal level |
1 Vp-p for Y of
component video and
S-video, and for
composite video
0.7 Vp-p for RGB and for
R-Y and B-Y of component
video
0.3 Vp-p for C of
S-video |
|
Minimum/maximum
levels |
0.5 V to 1.5 Vp-p |
|
Impedance |
75 ohms |
|
Return loss |
-40 dB to input section
at 3.58 MHz/4.43 MHz |
|
DC offset |
±10 mV maximum with
input at 0 offset |
|
Switching type |
Vertical interval |
|
Slew rate |
>200 V/ms |
|
Sync — sync BME |
|
Input and
output types |
Software configurable
for RGBHV or RGBS |
|
Sync
connectors |
Up to 64 or 32 BNC
female (quantity varies
with configuration) |
|
Input level |
0.5 V to 5 Vp-p (4 Vp-p
nominal) |
|
Output level |
5 Vp-p |
|
Gain |
AGC to TTL : 4.0 V to
5.0 Vp-p |
|
Input
impedance |
Inputs 1 - 16: 510 ohms
or 75 ohms, switchable
Inputs 17 - 64: 510 ohms |
|
Output
impedance |
75 ohms |
|
Horizontal
frequency |
15 kHz to 150 kHz |
|
Vertical
frequency |
30 Hz to 150 Hz |
|
Polarity |
Positive or negative
(follows input) |
|
Audio — audio BME |
|
Routing |
Up to 64 x 64 mono or
stereo matrix (in
increments of 8),
balanced/unbalanced |
|
Gain
(selectable per output) |
Unbalanced output: 0 dB
(as shipped), or -6 dB
(jumper-selectable)
Balanced output: +6 dB
(as shipped), or 0 dB
(jumper-selectable) |
|
Frequency
response |
20 Hz to 20 kHz, ±0.05
dB |
|
THD + Noise |
0.03% @ 20 Hz to 20 kHz,
+15 dBu input, +21 dBu
output nominal level |
|
S/N |
>85 dB, balanced, at
rated maximum output |
|
Crosstalk |
<-70 dB @ 20 Hz to 20
kHz, fully loaded |
|
Stereo channel
separation |
>70 dB @ 20 Hz to 20 kHz |
|
CMRR |
>+75 dB, 20 Hz to 20 kHz |
|
Audio input — audio BME |
|
Number/signal
type |
(8 to 64) (in increments
of 8) mono or stereo,
balanced/unbalanced |
|
Connectors |
(8 to 64) 3.5 mm captive
screw connector, 5 pole
(stereo) or 3 pole
(mono) |
|
Impedance |
>10k ohms
unbalanced/balanced, DC
coupled |
|
Nominal level |
-10 dBV (316 mV) |
|
Maximum level |
+21.5 dBu, (balanced or
unbalanced) at 1%THD+N |
|
Input gain
adjustment |
-15 dB to +9 dB,
adjustable per input via
RS-232 control or front
panel |
|
NOTE |
0 dBu = 0.775
Vrms, 0 dBV = 1
Vrms, 0 dBV ≈ 2
dBu
|
|
|
Audio output — audio BME |
|
Number/signal
type |
Up to 64 (in increments
of 8) mono or stereo,
balanced/unbalanced |
|
Connectors |
3.5 mm captive screw
connectors, 5 pole
(stereo) or 3 pole
(mono) (quantity varies
with configuration) |
|
Impedance |
50 ohms unbalanced, 100
ohms balanced |
|
Gain error |
±0.1 dB channel to
channel |
|
Maximum level
(Hi-Z) |
>+26.0 dBu, balanced at
1%THD+N |
|
Maximum level
(600 ohm) |
>+24.0 dBm, balanced at
1%THD+N |
|
Control/remote —
switcher |
|
Serial control
port |
RS-232 or RS-422, Female
9-pin D connector |
|
Baud rate and
protocol |
9600 baud, 8 data bits,
1 stop bit, no parity |
|
Serial control
pin configurations |
2 = TX, 3 = RX, 5 = GND |
|
System
intercommunications |
2 RJ-11 connectors |
|
Remote key pad
control |
(2) 5 mm, 5-pole captive
screw connectors |
|
Program
control |
Extron
control/configuration
program for Windows®
Extron Simple
Instruction Set (SIS™) |
|
General |
|
Power* |
100 VAC to 240 VAC,
50-60 Hz; internal
Matrix 6400
wideband............ 110
watts at 115 VAC, 60 Hz
Matrix 3200
wideband............ 50
watts at 115 VAC, 60 Hz
Matrix 6400
video....................
90 watts at 115 VAC, 60
Hz
Matrix 3200
video....................
40 watts at 115 VAC, 60
Hz
Matrix 6400
sync......................
65 watts at 115 VAC, 60
Hz
Matrix 3200
sync......................
35 watts at 115 VAC, 60
Hz
Matrix 6400
audio....................
195 watts at 115 VAC, 60
Hz
*A redundant power
supply is available. |
|
Temperature/humidity |
Storage: -40 to +158 °F
(-40 to +70 °C) / 10% to
90%, noncondensing
Operating: +32 to +122
°F (0 to +50 °C) / 10%
to 90%, noncondensing |
|
Cooling |
Fan, left to right as
viewed from front panel |
|
Mounting |
|
Rack mount |
Yes |
|
Enclosure type |
Metal |
|
5U dimensions |
8.75" H x 17.0" W x
14.1" D (5U high, full
rack wide)
22.2 cm H x 43.2 cm W x
35.8 cm D
(Depth excludes
connectors. Width
excludes rack ears.) |
|
7U dimensions |
12.25" H x 17.0" W x
14.1" D (7U high, full
rack wide)
31.1 cm H x 43.2 cm W x
35.8 cm D
(Depth excludes
connectors. Width
excludes rack ears.) |
|
Shipping/product
weight, rack height |
Matrix 6400 wideband...
42 lbs (20 kg)/29.1 lbs
(13.2 kg), 7U
Matrix 3200 wideband...
30 lbs (14 kg)/22.2 lbs
(10.1 kg), 5U
Matrix 6400
video.......... 33 lbs
(15 kg)/25.3 lbs (11.5
kg), 5U
Matrix 3200
video.......... 30 lbs
(14 kg)/22.4 lbs (10.2
kg), 5U
Matrix 6400
sync........... 44 lbs
(20 kg)/31.4 lbs (14.2
kg), 7U
Matrix 3200
sync........... 29 lbs
(14 kg)/21.0 lbs (9.5
kg), 5U
Matrix 6400
audio......... 38 lbs
(18 kg)/28.4 lbs (12.9
kg), 5U |
|
DIM weight,
international |
44 lbs (20 kg) |
|
Vibration |
ISTA 1A in carton
(International Safe
Transit Association) |
|
Regulatory
compliance |
|
Safety |
CE, c-UL, UL |
|
EMI/EMC |
CE, FCC Class A |
|
Warranty |
3 years parts and labor |
|
| |
|
|
