The TallyPlus is device which displays both the
camera number (0-9) and the camera tally state (live, standby).
Large, clear, illuminated numbers gives instant at-a-glance information on all
cameras to the talent.
When used in partnership with Autoscript�s LED8-LED19 monitors the TallyPlus is
mounted to the front of the monitor over the existing tally light. The built in
opto sensor on the rear of the TallyPlus can then capture and replicate the
status of the hidden tally light.
Where a ClockPlus unit is also used the TallyPlus can be mounted above the
teleprompter hood (MH-S, MH-W only) and using the supplied cables will also
tally in tandem with the ClockPlus. |
Product code: TALLYPLUS
|
|
Specifications
Physical Data:
Width: 60 mm (2.4 in)*
Height: 82 mm (3.2 in)*
Depth: 31 mm (1.2 in)*
Weight: 0.15 kg (0.33 lb)*
Excludes controls/connectors
Environmental Data:
Operating temperature range: 5�C to +40�C (41�F to +104�F) Storage temperature
range: -20�C to +60�C (-4�F to +140�F)
Electrical Data:
Supply voltage: 12VDC
Current (max) 0.22A
Display Data: Format:
Seven segment LED display digit (0-9)
Size: 57.1 mm (2.25 in)
Opto Sensor Data:
Sensor Light dependent resistor, 20k Ω at 10 Lux, 5K Ω at 100 lux
High illumination: Red tally indication
Low illumination: Green tally indication
Connections Data:
TallyPlus DC Power Socket: Connector type: 2.1 mm DC socket.
TallyPlus Alternative DC Power Socket: Connector type: 3.5 mm mono jack socket.
TallyPlus Opto Sensor Socket: Connector type: 3.5 mm mono jack socket.
|
|
|
|
