| |
4098H Hanging
Supercardioid Microphone
|
| |
Product
Code:4098Hmini
|
Model:4098H
Miniature
Microphone
Dedicated to hanging
applications like churches, performing arts centers, orchestra
pits, theatres and TV studios, the 4098H delivers sparkling clear
and distinct natural sound for both recording and sound
reinforcement of choirs, instrumental or vocal groups, speech or
live audiences.
|
|
| |
|
|
| |
|
| |
|
4098H Hanging
Supercardioid Microphone
-
Accurate, natural sound
with superior gain before feedback
-
Minimal visual impact,
available in black and white
-
Exceptional RF
interference rejection
Dedicated to hanging
applications like churches, performing arts centers, orchestra
pits, theatres and TV studios, the 4098H delivers sparkling clear
and distinct natural sound for both recording and sound
reinforcement of choirs, instrumental or vocal groups, speech or
live audiences.
The 4098H represents a breakthrough in discreet, elegant and
lightweight design. Extremely low in profile, the integrated
gooseneck provides the ability to easily aim the mics, ensuring
perfect positioning with minimal visual impact since the cables are
very slim and nearly invisible.
These microphones live up to their pedigree with sound as accurate
as DPA’s other world-class microphones with clear and natural
sound, flat response and uniform off-axis sound combined with
excellent gain-before-feedback characteristics for live sound. The
4098H has extremely high rejection of RF interference post the
signal balanced XLR connector which offers more than 60 dB common
mode rejection.
With its easy to hang and aim design along with its extremely
natural sound, the 4098H is truly a hanging microphone without
equal that continues the heritage of sonic excellence from DPA
Microphones.
|
|
General
Specifications |
| Directional
characteristics: |
Supercardioid |
| Principle of
operation: |
Pressure
gradient |
| Cartridge type: |
Pre-polarized
condenser |
| Frequency
range: |
20Hz to 20kHz |
| Frequency range, ± 2 dB,
20 cm (7.9 in) distance: |
80 Hz to 15 kHz with 3 dB diffuse field boost at
8 to 15 kHz |
| Sensitivity,
nominal, ±3 dB at 1 kHz: |
20 mV/Pa; -34 dB re. 1
V/Pa |
| Equivalent noise level
A-weighted: |
Typ. 23 dB(A) re. 20 µPa
(max. 26 dB) |
| Equivalent
noise level, ITU-R BS.468-4: |
Typ. 35 dB (max. 38
dB) |
| S/N ratio (A-weighted), re. 1
kHz at 1 Pa (94 dB SPL): |
71 dB(A) |
| Total
harmonic distortion (THD): |
< 1 % up to 123 dB SPL peak,
< 1 % up to 120 dB SPL RMS sine |
| Dynamic range: |
Typ. 100 dB |
| Max. SPL,
peak before clipping: |
134 dB |
| Output impedance: |
From MicroDot: 30 to 40 ohm; from DAD6001-BC:
100 ohm |
| Cable drive capability: |
Up to 300 m (984 ft)
with DAD6001 XLR adapter |
| Output balance
principle: |
Signal balanced with DAD6001-BC
XLR adapter |
| Common Mode
Rejection Ration (CMRR): |
> 60 dB at 50 Hz to 15 kHz
with DAD6001-BC XLR adapter |
| Power supply (for full
performance): |
For wireless systems: Min. 5 V – max. 50 V
through DPA adapter; with DAD6001: 48 V phantom power ±4
V |
| Current
consumption: |
1.5 mA (microphone); 3.5 mA with
DAD6001-BC XLR adapter |
| Connector: |
MicroDot; 3 pin XLR-M from
DAD6001 XLR adapter |
| Color: |
Black (4098HB) or white
(4098HW) |
| Microphone Weight: |
5 g (0.18 oz) |
| Microphone
diameter: |
10 mm (0.39
in) |
| Capsule diameter: |
5.4 mm (0.2 in) |
| Microphone
length: |
154 mm (6.1
in) |
| Polarity: |
Positively increasing sound
pressure produces positive going voltage on MicroDot pin (and pin 2
on DAD6001-BC XLR adapter) |
| Temperature
Range: |
-40 °C to 45 °C (-40
°F to 113 °F) |
| Relative humidity: |
Up to 90 % |
| Gooseneck
length: |
95 mm (3.7
in) |
|
| |
|
|
|
|
|
