|
HMA5000 High-Voltage
Microphone Amplifier, 2-channel
With the HMA5000 and
one of our hi-voltage microphones, you have the most serious signal
path from sound source directly to track. With an impressive
frequency range from 10 Hz to 100 kHz (+0 dB/-1 dB) and an
extremely wide dynamic range of 140 dB, the HMA5000 carries the
clean and undistorted microphone pickup through the amplification
link without any disturbance - the finest challenge for a mic
amp.
The HMA5000 is designed for use close to the microphones to keep
microphone cables as short as possible, it therefore has an
extremely compact, simple and rugged chassis design.
Besides being a microphone amplifier with unsurpassed specs,
HMA5000 is an extremely comprehensive microphone power supply unit
with 130 V for the hi-voltage microphone preamplifiers, 190 V for
capsule polarisation and 6 V for heater voltage in the 4041-T tube
microphone. The gain range is from -20 dB to +30 dB by individual
switches per channel. Also the phase can be reversed on both
channels individually.
With the HTP4000 adaptor, the HMA5000 can be used with ordinary 48
V phantom powered microphones.
Armed with this, you give your DPA mics the amp they
deserve!
|
|
General
Specifications |
Frequency range, ± 2 dB: |
10 Hz - 100 kHz +0 dB / -1 dB
(Resistive Load) |
Gain: |
+30 dB, +20 dB, +10
dB, 0 dB, -10 dB, -20 dB (± 0,5 dB) |
Total harmonic
distortion (THD): |
<0,009% (30 Hz – 30
kHz) |
Crosstalk: |
>90 dB (20 Hz
– 20 kHz) |
Maximum output
DC offset: |
±20 mV |
Maximum output voltage: |
32 V
peak |
Input
impedance: |
30 kOhm (with HTP4000: 5
kOhm) |
Output impedance: |
40 Ohm eachoutput (80
Ohm balanced) |
Output
connector: |
Standard 3-pin male XLR
connector |
Input connector: |
Modified 7-pin female
XLR connector |
Power
consumption: |
Max. 15 W |
Color: |
Black |
Weight: |
1.85 kg (4
lb) |
Dimensions: |
200 x 133 x 52
mm |
Number of
channels: |
2 |
Operating temperature range: |
-10° C –
+55° C |
|
|
|
|
|