Panasonic AJ-HD130DC |
||||
|
|
|
AJ-HD130DC Specifications |
General | |
Power Supply: | AC120V ±10%, 50
to 60 Hz DC12V (6.1A) |
Power Consumption: | 97W |
Operating Temperature: | 41°F to 104°F (5°C to 40°C) |
Operating Humidity: | 10% to 85% (non dew) |
Weight: | 19.84 lbs (9 kg) |
Dimensions (WxHxD): | 8-7/16” x 5-1/4” x 16-15/16” (214 x 132 x 430 mm) |
Recording Format: | DVCPRO HD (1080i/59.94Hz, 720p/59.94Hz switchable ) |
Recording Track: | Digital
Video/Audio:Herical track TC:Subcode area Cue:1 longitudinal track CTL:1 longitudinal track |
Tape Speed: | 135.280mm/s |
Rec/Play Time: | Max. 46 minutes with AJ-HP46LP |
Tape: | 1/4” metal particle |
FF/REW Time: | Less than 4 minutes with AJ-HP46LP |
Video | |
Sampling Frequency: | Y; 74.25/1.001MHz, Pb/Pr; 37.125/1.001MHz |
Quantization: | 8 bits |
Error Correction: | Reed-solomon product code |
Compression Method: | DTC + variable length code |
Compression Ratio: | 6.7:1 |
Bit Rate: | 100 Mbps |
Digital Audio | |
Channel: | 8 channels |
Sampling Frequency: | 48kHz (synchronous with video) |
Quantization: | 16 bits |
Frequency Response: | 20Hz to 20kHz, ±1.0dB (reference level) |
Dynamic Range: | More than 85dB (1kHz, emphasis off, “A” weighted) |
Distortion: | within 0.1% (1kHz, emphasis off, reference level) |
Cross Talk: | Less than –80dB (1kHz, between any 2 channels) |
Wow & Flutter: | Below measurable limit |
Headroom: | 20 dB |
Video Input | |
HD SDI: | BNC x 1, SMPTE 292M/296M |
HD/SD Reference: | HD Tri-Level
SYNC (59.94 Hz) or Analog Composite BNC x 2 (loop-through), 75 On/Off |
Video Output | |
HD SDI: | BNC x 2, SMPTE 292M/296M |
SD SDI: | BNC x 1 (down-convert ), SMPTE 259M-C |
Analog Composite: | BNC x 2 (down-convert), super on/off |
Video Output Adjustment Range | |
HD SDI System Phase: | ±0.5H (±550 sample, 27ns step) |
SD SDI/Composite Video System Phase: | ±0.5H (±429 sample, 74ns step) |
SD SDI/Composite Video SC Phase: | ±180° |
Audio Input | |
Analog: | XLR x 4
(CH1/2/3/4), +4/0/–20/–60 dBu switchable, 600/high-impedance switchable (3K of –60 dBu) factory setting; high-impedance |
Serial Digital: | Embedded with HD SDI (SMPTE299M) |
Audio Output | |
Analog: | XLR x 4 (CH1/2/3/4),
+4/0/–20 dBu switchable, low-impedance, CH3/4 switchable for monitor out (L/R) |
Serial Digital: | Embedded with HD SDI
(SMPTE299M) Embedded with SD SDI (SMPTE272M-A) |
Headphones: | M3, variable level control, 8 |
Others | |
TC IN: | BNC x 1, 0.5 to 8.0 Vp-p, 10K |
TC OUT: | BNC x 1, low-impedance, 2.0±0.5 Vp-p |
RS-422A IN: | D-sub 9 pin RS-422A interface for AJ-A95 |
DC OUT: | 4-pin x 1, DC12V, 250 mA for AJ-A95 |
Weight and dimensions shown are approximate. Features and specifications are subject to change without notice. These products may be subject to export regulations. |
Check it out on our new Expandore web site