| SPECIFICATIONS |
| DFS-900M Processor
Unit |
| General |
| Power
requirements |
100 to 240 V AC,
50/60 Hz |
| Power
consumption |
400 W (when the
maximum number of optional boards are installed) |
| Operating
temperature |
5ºC to
40ºC (41ºF to 104ºF) |
| Dimensions
(W/H/D) |
440 × 132
× 445 mm ( 17 3/8 × 5 1/4 × 17 5/8
inches) |
| Mass |
17.3 kg (38 lb 2
oz) (not including any optional product) |
| Signal
processing |
| Television
system |
1080/59.94i,
1080/50i, 720/50p, 720/59.94p, 480/59.94i, 576/50i |
| Signal processing
system |
4:2:2:4 digital
component |
| Quantization
bits |
Y: 10 bits, C: 10
bits, KEY: 10 bits |
| Input/output
delay |
1 H (when the
frame synchronizer is OFF) |
| Inputs/Outputs |
| Video
input |
BNC (x8), 800
mVp-p, 75 Ω
HD-SDI: 1.485 Gbps or 1.485/1.001 Gbps
SD-SDI: 270 Mbps
The frame synchronizer function is built in for all the
inputs. |
| Reference
input |
BNC (x2), 75,
loop-through (An external 75-ohm terminator is required.)
BB: NTSC 0.429 Vp-p, PAL 0.45 Vp-p (Tri-level sync: ±0.3 Vp-p
is available
for HD mode.) |
| Video
output |
BNC (x4), 800
mVp-p, 75 Ω
HD-SDI: 1.485 Gbps or 1.485/1.001 Gbps
SD-SDI: 270 Mbps |
| Reference
output |
BNC (x1), 75
Ω
BB: NTSC 0.429 Vp-p, PAL 0.45 Vp-p (Tri-level sync: ±0.3 Vp-p
is available
for HD mode.) |
| Interfaces |
| REMOTE |
D-sub 9-pin (x3),
female |
| EDITOR |
D-sub 9-pin,
female |
| GPI
IN |
D-sub 25-pin,
female, 16 inputs |
| TALLY/GPI
OUT |
D-sub 37-pin,
female, 32 outputs |
| PANEL |
RJ-45
type |
| Supplied accessories |
| |
Control cable
(shielded cross cable complied with IEEE 802.3 Ethernet
100BASE-TX standards, for connection between the Processor Unit
and
Control Panel) (1)
Operating Instructions (1) |
| |
| BKDF-901 1M/E
Control Panel |
| General |
| Power
requirements |
100 to 240 V AC,
50/60 Hz |
| Power
consumption |
28
W |
| Operating
temperature |
5ºC to
40ºC (41ºF to 104ºF) |
| Dimensions
(W/H/D) |
430 × 110.1
× 221 mm (17 × 4 3/8 × 8 3/4 inches) |
| Mass |
4.4 kg (9 lb 11
oz) |
| Interface - Operating panel |
| USB
MEMORY |
High Speed USB
(USB2.0) Type-A |
| Interface - Rear panel |
| EXT
DISPLAY |
High Density D-sub
15-pin, female |
| DEVICE |
High Speed USB
(USB2.0) Type-A |
| PROCESSOR |
RJ-45 |
| |
| BKDF-902 1.5M/E Control Panel |
| General |
| Power
requirements |
100 to 240 V AC,
50/60 Hz |
| Power
consumption |
68W |
| Operating
temperature |
5ºC to
40ºC (41ºF to 104ºF) |
| Dimensions
(W/H/D) |
599 × 120.8
× 399 mm (23 5/8 × 4 7/8 × 15 3/4
inches) |
| Mass |
10.4kg (22 lb 15
oz) |
| Interface - Operating panel |
| USB
MEMORY |
High Speed USB
(USB2.0) Type-A |
| Interface - Rear panel |
| EXT
DISPLAY |
High Density D-sub
15-pin, female |
| DEVICE |
High Speed USB
(USB2.0) Type-A |
| PROCESSOR |
RJ-45 |
 |
