|
･ Wide range of image modes
(Select the ideal image mode based
on what you want to monitor and
where the camera is installed.)
・
Double Panorama Mode
When the
camera is installed on the ceiling,
the entire area under the camera is
displayed as two 180° panoramic
images.
・ Panorama Mode
When the camera is installed on a
wall, the 180° area in front of the
camera is displayed as a panoramic
image. Blind spots that occur at the
left and right sides of the image
when using a 104° horizontal
wide-angle camera (WV-SW155) are
captured clearly.
・ Quad PTZ
Mode
4 VGA size (640 x 480 dot)
images displayed on one screen.
Images in all four directions from
the camera installation location are
displayed on one screen.
You can
click on areas within images that
you want to see, display a 360°
fisheye image at the side of the
display, and move to positions that
you want to see simply by clicking.
・ Single PTZ Mode
Displays
one quad VGA size (1280 x 960 dot)
image. You change the display area
by clicking the area you want to see
in the image.
・ Fisheye Mode
Displays full 360° fisheye images,
enabling monitoring without blind
spots.
Shooting in all directions
means that the path of everyone
walking beneath the camera can be
monitored. Images can be displayed
in 3Mbps or 1.3 Mbps modes.
・
4 Stream Mode
Four VGA size (640
x 480 dot) images are transmitted.
The operator sets the orientation
beforehand
Privacy Mode
Privacy mode allows you to protect
your privacy by hiding the lens
inside the camera, preventing camera
images from being seen. When privacy
mode is activated:
– The live
image changes to a black display.
– JPEG images attached to “Alarm
image” transfers, “FTP img. trans.”
transfers, and “E-mail” transfers
change to black images.
The
privacy mode can be activated and
deactivated with 2 methods: using
the [Privacy] button in the setup
menu, and accessing the camera from
a cellular phone/mobile terminal as
the administrator.
|
