Single-ear Directional Headset

 DPA d:fine™ Single-ear Directional Headset Microphone

Home > DPA Pro Audio > d:fine Headsets  > Single Ear Directional Headset
 DPA d:fine™ Single-ear Directional Headset Microphone


DPA d:fine™ Single-ear Directional Headset Microphone

 

• Pristine audio quality
• Easy single-ear or dual-ear mounting
• Rejects background noise
• Adapts to all pro wireless systems

The DPA d:fine™ headset has the leading position when it comes to headworn microphones by combining absolute pristine audio quality with unique and simple mechanical solutions along side an extensive accessory line.

The d:fine™ has been ergonomically designed to fit easily and seamlessly. It will adjust to fit any ear size and head shape while mounting on either the left or right side of the head.

Just by rotating the boom, the microphone can be moved from left to right ear, or into the optimum position.

The d:fine™ directional rejects side and background noise while creating higher separation from nearby sound sources which improves the gain-to-feedback ratio and gives more channel control. Yet still, natural voice intelligibility is preserved along with its very high SPL capabilities one can both speak and sing with no hint of distortion. This is where the DPA d:fine™ is head and shoulders above its competition.

Just by rotating the boom, the microphone can be moved from left to right ear, or into the optimum position. The mic boom also comes in a short version.

Intensive protection against pop/wind noise is integrated in the microphone and windscreens are included. Also included is a capsule protection cap, a cable clip which anchors the cable to your clothing and a color coded cable clip offering easy recognition of a specific headset among many.

A service connector splits the cable from the microphone boom and allows for quick exchange of cable lengths/colors/connectors and is valuable for servicing broken cables.

Available in black, beige, brown, and lime green, the DPA d:fine is delivered in a neat, professional roadworthy box with extra room for accessories like transmitters, batteries and more.

The DPA accessory line includes windscreens, power supplies and adapters or cables with fixed connectors (MicroDot, 3-pin Lemo, TA4F mini XLR, Mini-jack).
• Microphone (boom, ear-hook, cable)
• Cable clip which anchors the cable to your clothing
• Make-up cover and moisture filter (DUA0523) pre-mounted on the mic
• Five identification rings and one make-up cover (DUA0585)
• Four windscreens (DUA0531)
 
 Directional characteristics:  Cardioid
 Principle of operation:  Pressure gradient
 Cartridge type:  Pre-polarized condenser
 Frequency range:  20 Hz - 20 kHz
 Frequency range, ± 2 dB, near field 2 to 3 cm (0.8 to 1.2 in):  100 Hz - 20 kHz with 3 dB soft boost at 8 - 20 kHz
 Sensitivity, nominal, ± 3 dB at 1 kHz:  6 mV/Pa; -44 dB re. 1 V/Pa
 Equivalent noise level, A-weighted:  Typ. 28 dB(A) re. 20 µPa (max. 30 dB(A)).
 Equivalent noise level, ITU-R BS.468-4:  Typ. 40 dB (max. 42 dB)
 S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL):  Typ. 66 dB(A).
 Total Harmonic Distortion (THD):  <1 % up to 123 dB SPL peak; <1 % up to 120 dB SPL RMS sine
 Dynamic range:  Typ. 95 dB
 Max. SPL, peak before clipping:  144 dB
 Output impedance:  From MicroDot: 30 - 40 ohm. From DAD6001-BC: 100 ohm.
 Cable drive capability:  Up to 300 m (984 ft) with DAD6001-BC XLR adapter
 Output balance principle:  Signal balanced with DAD6001-BC XLR adapter
 Common Mode Rejection Ratio (CMRR):  > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR adapter
 Power supply (for full performance):  Min. 5 V to max. 50 V through DPA adapter for wireless systems. 48 V phantom power ± 4 V with DAD6001-BC XLR adapter.
 Current consumption:  Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR adapter.
 Connector:  MicroDot
 Color:  Black, beige, brown, lime
 Weight:  Microphone boom: 0.8 g (0.03 oz); earhook: 1.1 g (0.04 oz); cable: 6.6 g (0.23 oz). Total: 8.5 g (0.30 oz).
 Microphone head size (h x w x d):  9.5 x 5.3 x 2.9 mm (0.37 x 0.21 x 0.11 in)
 Capsule diameter:  5.4 mm (0.2 in)
 Mic boom length:  120 mm (4.7 in)
 Cable length:  1.3 m (4.3 ft)
 Cable color:  Black, beige, brown
 Cable diameter:  1.6 mm (0.06 in)
 Polarity:  +V at MicroDot pin for positive sound pressure (and pin 2 on DAD6001-BC XLR adapter)
 Electro Magnetic Compatibility (EMC):  Fully compatible
 Temperature range:  -40 °C to 45 °C (-40 °F to 113 °F)
 Relative Humidity (RH):  Up to 90%
 

 

Products
d:fine Headsets
Single-ear Omni directional
66 Single-ear Omni directional
Single-ear Directional
88™ Single-ear Directional
Dual-ear Omni-directional
66 Dual-ear Omni-directional
4065 Omni-directional
4066 Omni-directional
4067 Omni-directional
Dual-ear Directional
88 Dual-ear Directional
4088 Dual-ear Directional
Headset Microphone, 5 pcs. Touring Kits
d:vote™ 4099
d:facto Vocal
d:screet™ Miniature
d:dicate™ Recording Mics
Adapters
Accessories

Read our blogs