|
|
ST4011A Stereo Pair with 4011A
Cardioid
|
|
Product
Code:ST4011A
|
Model:ST4011A Reference Standard
Microphone Kits
The DPA ST4011A is a complete DPA
4011A Stereo Pair with two carefully factory-matched first order
cardioid microphones.
|
|
|
|
|
|
|
|
ST4011A Stereo Pair
with 4011A Cardioid
-
World-wide cardioid
reference mic
-
Handles very high sound
pressure levels
-
Carefully matched
within ±1 dB
-
PeliTM Case
transportation and protection
4011A
cardioids are exceptionally linear in their frequency response
– also off axis, giving you the natural experience. They
handle extremely high SPL and will therefore allow for close
placement and are often used for piano recordings with a placement
closer to the hammers or as overheads for drums.
The DPA ST4011A is a complete DPA 4011A Stereo Pair with two
carefully factory-matched first order cardioid microphones. Even
though the standard tolerances on DPA Reference Standards are
extremely low, a stereo match is even closer.
The specially selected DPA 4011A microphones are matched within
±1 dB on both frequency response and sensitivity.
The foam design in the heavy-duty transportation box allows for
fast and easy exchange of microphone/accessory inlay.
Included in this kit
Two carefully matched 4011A cardioid microphones, sturdy PeliTM
case, holders, and windscreens.
Accessories
You may be interested in combining the ST4011A with:
SBS0400 Modular Stereo Boom w. Shock
Mounts
The lightweight SBS0400 stereo boom addresses the need for quick
and flexible ways to switch between stereo principles like AB, XY
and ORTF. A central base with rotary joint allows the microphones
to be angled equally. SBS0400 has hooks for suspending the boom in
wires. The standard length is 40 cm (1.3 ft) but the boom can be
further extended. Includes two SM1500 shock mounts (also available
as SB0400 without shock mounts).
UA0836 Stereo
Boom
The legendary, precision handcrafted DPA stereo boom for accurate
and repeatable positioning. Has distance markings in centimeters
and typical angle offset markings on holder bases. Can be stand
mounted or ceiling suspended. Length: 54 cm. Also available as
UA0837 without holders.
SM1500 Shock Mount,
Modular
The SM1500 is a modular double pole construction on an adjustable
mic stand base. Use this mount to decouple vibrations to your
microphone.
TIP: Combined with the
MB4000 Magnet Base, the SM1500 and 2006C
make a good solution for on-frame
mounting inside the piano with closed lid or on short stick for
high isolation.
|
General
Specifications |
-NiL-
|
|
|
|
|
|
|