|
|
ST2011C Stereo Pair with 2011C
Cardioid
|
|
Product
Code:ST2011C
|
Model:ST2011C Reference Standard
Microphone Kits
The DPA ST2011C is a complete DPA
2011C Stereo Pair with two handpicked cardioid microphones,
selected on sensitivity within ±1.5 dB making several stereo
principles like XY and ORTF easy to obtain.
|
|
|
|
|
|
|
|
ST2011C Stereo Pair
with 2011C Cardioid
-
Sensitivity selected
pair
-
Superb stage separation
and level control
-
All-round
workhorses
-
PeliTM Case
transportation and protection
The DPA ST2011C is a
complete DPA 2011C Stereo Pair with two handpicked cardioid
microphones, selected on sensitivity within ±1.5 dB making
several stereo principles like XY and ORTF easy to obtain.
Finding its use on numerous stages and recording sessions, the
ST2011C exhibits a previously unheard blend of clarity, richness
and dynamic range, the 2011Cs perform close to much more exclusive
microphone pairs.
The foam design in the heavy-duty transportation box allows for
fast and easy exchange of microphone/accessory inlays.
Included in this
kit
Two carefully matched 2011C cardioid microphones, sturdy PeliTM
case, holders, and windscreens.
Accessories
You may be interested in combining the ST2011C with:
SBS0400 Modular Stereo Boom w. Shock
Mounts
The lightweight SBS0400 stereo boom addresses the need for quick
and flexible ways to switch between stereo principles like AB, XY
and ORTF. A central base with rotary joint allows the microphones
to be angled equally. SBS0400 has hooks for suspending the boom in
wires. The standard length is 40 cm (1.3 ft) but the boom can be
further extended. Includes two SM1500 shock mounts (also available
as SB0400 without shock mounts).s
DAO4010 Cable with slim XLR
connector
Cable designed for suspension or minimal visual appearance using
Mogami cable and an ultra slim DPA XLR housing, adding only a few
millimeters extra length to the microphone.
UA0836 Stereo
Boom
The legendary, precision handcrafted DPA stereo boom for accurate
and repeatable positioning. Has distance markings in centimeters
and typical angle offset markings on holder bases. Can be stand
mounted or ceiling suspended. Length: 54 cm. Also available as
UA0837 without holders.
SM1500 Shock Mount,
Modular
The SM1500 is a modular double pole construction on an adjustable
mic stand base. Use this mount to decouple vibrations to your
microphone.
TIP: Combined with the
MB4000 Magnet Base, the SM1500 and
2006C make a good solution for on-frame mounting inside the piano
with closed lid or on short stick for high isolation.
|
General
Specifications |
-NiL-
|
|
|
|
|
|
|