| DPA d:dicate� 4041-SP Large Diaphragm Microphone, P48 |
|
Product Code:
4041SP
|
� Handles high sound pressure levels with no
distortion
� Natural and transparent sound
The 4041-SP is designed to work in a standard 48 V phantom power environment.
Since the capsule is the same as for the high voltage alternative 4041-S, the
4041-SP offers the same superior sound quality, with very slight changes in the
specifications.
The cartridge MMC4041 can be unscrewed from the preamplifier which allows for
the exchange of the preamplifier module. It is therefore always possible to
upgrade to the high voltage preamplifier, also using the DPA mic amp HMA5000.
The frequency response has a 4-6 dB soft lift around 8 kHz and matches the
response of the legendary 4040 Hybrid Microphone. This microphone offers a
totally transparent audio path with an exceptionally low noise floor of maximum
8 dB(A) and a SPL handling capability of 134 dB SPL peak. |
| Directional pattern: |
Omni |
| Principle of operation: |
Pressure |
| Cartridge Type: |
24 mm (1 in) condenser w. stainless
steel diaphragm |
| Frequency range, ± 2
dB: |
20 Hz - 20 kHz with 4 - 6 dB soft
boost at 8 kHz |
| Sensitivity, nominal, ± 2 dB: |
70
mV/Pa;-23.1 dB re. 1 V/Pa |
| Equivalent noise level,
A-weighted: |
Max. 8 dB(A) re. 20 �Pa |
| Equivalent noise level, ITU-R
BS.468-4: |
Max. 20 dB |
| S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): |
86 dB |
| Total Harmonic Distortion (THD): |
<0.5% THD up to 120 dB SPL peak, <1%
THD up to 126 dB SPL peak |
| Dynamic range: |
Typ. 118
dB |
| Max. SPL, peak before
clipping: |
134
dB |
| Output impedance: |
<200 Ohm |
| Cable drive
capability: |
Up to 100 m (328 ft) |
|
Current consumption: |
2.20 mA |
| Weight: |
190 g (6.7 oz) |
| Capsule diameter:
|
24 mm (1 in) |
| Connector: |
3-pin XLR-M (Standard P48) |
|
|
|
|
|
