| DPA d:dicate™ 2011F Table, Podium or Floor
Stand Microphone |
|
Product Code:
2011F
|
• All-round workhorse -
blends clarity, richness and dynamics
• Twin-Diaphragm capsule and interference tube
technologies
• Superb stage separation and level control
• Modular flexibility
Due to its modular nature, the MMC2011 cardioid capsule can be
combined with different lengths of podium boom poles - 15, 30 or 45
cm (6, 12 or 18 in). If longer booms are needed for floor stands
with visual elegance, our long booms at 75 or 120 cm (30 or 48 in)
makes a high-quality stage voice or instrument mic together with
our dedicated accessories.
2011 is primarily optimized for on-stage use and the technology
combines the new Twin Diaphragm Capsule and DPA's strong know-how
within interference tube technology. With our sleek floor stands it
is also a joy for the stage designer.
While 4011 has gained worldwide admiration for its total linearity
at all sound confrontations, the 2011 is purposely aimed
differently; the off-axis response is still linear but in a smaller
frequency bandwidth making stage separation and gain-to-feedback
higher and mic level easier to control. |
| Directional pattern: |
Cardioid |
| Principle of operation: |
Pressure gradient, with
interference tube |
| Cartridge Type: |
Pre-polarized condenser,
Twin Diaphragm Capsule |
| Frequency range: |
20 Hz to 20
kHz |
| Frequency range, ± 2 dB: |
50 Hz to 17 kHz with 3 dB
soft boost at 12 kHz |
| Sensitivity, nominal, ± 2 dB at 1 kHz: |
10 mV/Pa; -40 dB re. 1
V/Pa |
| Equivalent noise level, A-weighted: |
Typ. 20 dB(A) re. 20
µPa (max. 23 dB(A)) |
| Equivalent noise level, ITU-R BS.468-4: |
Typ. 33 dB (max. 36
dB) |
| S/N
ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): |
Typ. 74
dB(A) |
| Total Harmonic Distortion (THD) at 1 kHz: |
< 1 % up to 137 dB SPL
peak |
| Minimum load impedance: |
2 kohm |
| Dynamic range: |
Typ. 117
dB |
| Max. SPL, peak before clipping: |
144 dB |
| Output impedance: |
100 ohm |
| Cable drive capability: |
100 m (328
ft) |
| Output balance principle: |
Impedance
balancing |
| Common Mode Rejection Ratio (CMRR): |
> 40
dB |
| Power supply (for full specifications): |
48 V Phantom power (± 4
V) |
| Current consumption: |
3.5
mA |
| Connector: |
XLR-3M. Pin 1:
shield, Pin 2: signal + phase, Pin 3: - phase |
| Color: |
Matte
black |
| Weight: |
115 g (4
oz) |
| Diameter: |
19 mm (0.75
in) |
| Length: |
63 mm (2.48
in) |
| Output voltage, RMS: |
2.2V |
| Polarity: |
+V at Pin 2 for positive
sound pressure |
| Temperature range: |
-40 °C to 45
°C (-40 °F to 113 °F) |
|
Relative Humidity (RH): |
Up to 90% |
|
|
|
|
|
