| DPA d:screet™
Heavy Duty 4061 Omnidirectional Microphone,
Lo-Sens |
|
ProductCode:
HEAVYDUTY4061
|
The d:screet™ Heavy
Duty is DPA's toughest miniature microphone. Made for situations
where you require the maximum amount of security and where the
visual size is of less importance, the d:screet Heavy-duty which
features a stainless steel housing, a heavy-duty cable relief and a
thick 2.2 mm cable.
Originally designed for use with wireless systems in theater,
television and close-miked instrument applications, the
d:screet™ Heavy Duty 4061 Miniature Omnidirectional
Microphone exhibit an exceedingly accurate omnidirectional pattern
and therefore do not need to be aimed directly at the sound source
to achieve quality pickup.
The d:screet™ series of Miniature Omnidirectional Microphones
are the versatile workhorses that adapts to your needs. With
eminent sound quality, a large range of accessories, and adapters
available for all pro wireless systems, the d:screet Miniature Omni
Mics are the obvious choice for any application requiring a big
sound and a small footprint.
The d:screet Heavy Duty Omnidirectional Miniature Microphone comes
with either our 4060 high sensitivity or our 4061 low sensitivity
capsule and in either black or beige.
Features:
• Exceptional audio quality with low noise and high
sensitivity
• Stainless steel housing, heavy-duty cable relief and thick
2.2 mm cable for maximum durability
• Adapts to all pro wireless systems
• Large selection of accessories
|
| Directional
characteristics: |
Omnidirectional |
|
Principle of operation: |
Pressure |
|
Cartridge type: |
Pre-polarized condenser element with vertical
diaphragm |
|
Frequency range, ± 2 dB: |
20 Hz - 20 kHz. Soft boost gitter: 3 dB soft
boost ved 8 - 20 kHz. High boost gitter: 10 dB boost ved 12
kHz. |
|
Sensitivity, nominal, ±3 dB at 1
kHz: |
6 mV/Pa; -44.5 dB re. 1
V/Pa |
|
Equivalent noise level
A-weighted: |
Typ. 26 dB(A) re. 20 µPa (max. 28
dB(A)) |
|
Equiv. noise level ITU-R
BS.468-4: |
Typ. 38 dB (max. 40 dB) |
|
S/N ratio, re. 1 kHz at 1 Pa (94 dB
SPL): |
68 dB(A) |
|
Total harmonic distortion (THD): |
<1% up to 123 dB SPL
spidsværdi |
|
Dynamic range: |
Typ. 97 dB |
|
Max. SPL, peak before clipping: |
144 dB |
|
Output impedance: |
30 - 40
Ohm |
|
Cable drive capability: |
Up to 300 m (984 ft) |
|
Polarity: |
Positively increasing sound pressure produces
positive going voltage at pin 2 |
|
Power supply: |
For wireless For wireless systems: Min. 5 V
– max. 50 V through DPA adapter. With
DAD6001-BC/DAD6024/DAD4099: 48 V phantom power ±4 V for full
performance. |
|
Connector: |
MicroDot |
| Color: |
Black or beige |
|
Weight: |
13 g (0.46 oz)
incl. cable and MicroDot
connector |
| Microphone diameter: |
5.4 cm (0.2
in) |
|
Microphone
length: |
12,7 mm (0.5 in) |
| Cable
diameter: |
2.2 mm (0.09
in) |
|
Cable
length: |
1,8 m (6 ft) |
| Operating
temperature range: |
-40 °C to 45 °C (14 °F to 113
°F) |
|
Relative humidity
(RH): |
Up to 90 % |
|
|
|
|
|
