|
Gain |
Manual (0 to +18 dB 1 dB steps) |
|
External Trigger Input |
Pulse-edge detection mode Pulse-width
detection mode |
|
External Trigger Input Voltage |
Low : 0 to +0.5 V High : +4.5 V to +5 V |
|
Trigger Delay Function |
0 to 4 s 1 ms steps |
|
Hardware Look Up Table |
Gamma compensation Binarization
negative/positive reverse etc. |
|
Lens Mount |
C-mount |
|
Image Device |
1/2-type PS IT Monochrome CCD |
|
Effective Resolution |
1280 x 1024 (SXGA) |
|
Cell Size |
4.65 x 4.65 μm |
|
Frame Rate |
15 fps (SXGA) |
|
Binning |
Vertical / Horizontal binning |
|
Vertical Random Scanning |
32 to 1024 lines 32 line steps |
|
Horizontal Random Scanning |
384 to 1280 pixels 128 pixel steps |
|
Typical Frame Rate |
34 fps (VGA) 21 fps (XGA) |
|
Weight |
14 oz (400 g) |
|
Power Requirements |
10.5 to 26.4 V |
|
Dimensions (W x H x D) |
2 1/4 x 2 1/4 x 4 3/8 inches (55 x 55 x 110
mm) |
|
Power Consumption |
7.8 W |
|
Operating Temperature |
23 to 113 °F (-5 to +45 °C) |
|
Storage Temperature |
-22 to +140 °F (-30 to +60 °C) |
|
Operating Humidity |
20 to 80% non condensing |
|
Storage Humidity |
20 to 95% non condensing |
|
Vibration Resistance |
10 G (20 to 200 Hz) |
|
Shock Resistance |
70 G |
|
CPU |
x 86 AMD Geode GX533 400 MHz |
|
Memory |
256 MB DDR-SDRAM 128 MB Compact Flash |
|
CPU Value |
400 MHz |
|
Operating System |
Monta Vista Linux Professional edition 3.0 |
|
Network |
100Base-TX/10Base-T (Network protocols:
TCP/IP (IPv4) HTTP FTP) |
|
Digital I/Os |
TTL IN/OUT, Isolated IN/OUT, Trigger IN,
Exposure OUT |
|
Monitor Output |
D-sub 15pin for multi scan monitor |
|
USB Port |
Version 1.1 |
|
Serial Interface |
RS-232C |
|
|
|
|
|
|
|
|