| Model |
DT-V24L1D |
DT-V20L1D |
DT-V17L2D |
DT-V9L1D |
| Type |
Multi-format HDTV/SDTV LCD Display Monitor |
| Screen
Size |
Type 24 Wide
Format |
Type 20 Wide
Format |
Type 17 Wide
Format |
Type 9 Wide
Format |
| Aspect
Ratio |
16:10 |
15:9 |
| LCD
Panel |
24" wide, active matrix
TFT |
20" wide, active matrix
TFT |
17" wide, active matrix
TFT |
9" wide, active matrix
TFT |
| Effective Screen Size |
51.84 x
32.4cm |
43.34 x 27.09
cm |
36.72 x 22.95
cm |
19.5 x 11.7
cm |
| Pixels |
1920 x 1200
(W-UXGA) |
1680 x 1050
(W-SXGA+) |
1440 x 900
(W-SXGA+) |
800 x 480
(WVGA) |
| Display
Colours |
16.7
million |
approx. 16.2
million |
| Viewing
Angle |
Horizontal |
176° |
170° |
140° |
170° |
|
Vertical |
176° |
170° |
120° |
170° |
| Brightness |
400
cd/m2 |
350
cd/m2 |
|
Contrast Ratio
|
1000:1 |
800:1 |
600:1 |
400:1 |
| Horizontal/Vertical
Frequency (PC Signals) |
Horizontal |
31.469 kHz to 75.000
kHz |
- |
|
Vertical |
60 Hz ± 5
Hz |
- |
|
|
Depending on the
signal within the range of these frequencies, some signals may not
be displayable, in which case, "Out of range" is
shown. |
|
Applicable Standard
|
HD SDI: BTA S-004B, SMPTE292M
SD SDI: ITU-R BT.656: 525/625, SMPTE259M: 525
EMBEDDED AUDIO: SMPTE299M, SMPTE272M
|
|
Audio Output
|
Internal: 1.0 W + 1.0
W (L/R) |
1 W
(Mono) |
|
Environmental Conditions
|
Operating temperature
|
5°C to
35°C |
0°C to
40°C |
|
Operating humidity
|
20% to 80% (non
condensing) |
|
Power Requirements
|
AC 120/220-240 V,
50/60 Hz |
AC 120/220-240 V,
50/60 Hz/DC 12 V
|
|
Rated Current
|
0.67 A |
0.60 A |
0.36 A (AC 220-240
V),3.0 A (DC 12 V) |
0.25 A (AC 220-240V),1.7
A (DC 12 V) |
|
Dimensions (WxHxD) excluding
protrusions)
|
With
desktop stand
|
564 x 448.6 x 243
mm |
477 x 394.6 x 243
mm |
395 x 344.6 x 243
mm |
222.4 x 180.5 (Low) x
202 (Low) mm |
|
Without stand
|
564 x 408 x 99
mm
|
564 x 408 x 99
mm |
395 x 304 x 86
mm |
222.4 x 176 x 116
mm |
|
Weight
|
Excluding stand
|
8.7 kg |
7.4 kg |
5.3 kg |
2.6 kg |
|
Including stand
|
11.6 kg |
10.3 kg |
8.2 kg |
3.5 kg |
|
Provided Accessories
|
AC power cord, power
cord holder, screw x 2 (for power cord holder) |
Protective screen x1, screw x4
AC power cord, power cord holder, screw x 2
(for power cord holder)
(for protective screen), AC
power
cord, power cord holder, screw
x 2 (for power cord holder)
|
|
Options
|
Protective
screen |
Protective
screen/rack mount adapter |
Rack mount
adapter |
|
|
|
Input/Output Terminals
|
|
|
|
|
|
Video
|
VIDEO 1
|
Composite video
signal input/output: 1 line, BNC x 2, 1 V (p-p), 75 ohms *1
(IN and OUT are connected with a bridge connection) (auto
termination) |
|
VIDEO 2
|
Composite video
signal input/output: 1 line, BNC x 2, 1 V (p-p), 75 ohms *1
(IN and OUT are connected with a bridge connection) (auto
termination) |
- |
- |
|
DVI-D (HDCP)
|
DVI-D signal input
(compatible with HDCP): DVI-D connector x 1 (compatible with
DDC2B) |
|
|
COMPO./RGB*2
(G/Y, B/Pb/B-Y, R/Pr/R-Y)
|
Analogue component
signal/analogue RGB signal input/output: 1 line, BNC x 6
Video signal: G/Y: 1 V (p-p), 75 ohms (sync signal included),
B/Pb/B-Y, R/Pr/R-Y: 0.7 V (p-p), 75 ohms
(IN and OUT are connected with a bridge connection) (auto
termination) |
|
EXT.
SYNC (CS
|
Composite sync signal
input/output: 1 line, BNC x 2, 0.3 V (p-p) to 4 V (p-p), 75 ohms
(bipolar tri-signal, negative pole binary signals, BB) (video
signals excluded) (IN and OUT are connected with a bridge
connection) (auto termination) |
- |
- |
|
HD/SD SDI (IN 1)
|
Digital signal input
(compatible with EMBEDDED AUDIO): Auto detection, 1 line, BNC x
1 |
|
HD/SD SDI (IN 2)
|
Digital signal input
(compatible with EMBEDDED AUDIO): Auto detection, 1 line, BNC x
1 |
- |
|
HD/SD SDI (OUT)
|
Digital signal output
(compatible with EMBEDDED AUDIO): 1 line (switched out), BNC x
1 |
Digital signal
output (compatible with EMBEDDED AUDIO):1 line, BNC x
1
|
|
Audio
|
AUDIO ASSIGN (IN 1)
|
Analogue
audio signal input: 1 line, RCA x 2, 500 mV (rms), high
impedance |
Analogue audio signal
input: 1 line, RCA x 2, 500 mV (rms), high
impedance |
Analogue audio signal
input: 1 line, RCA x 1, 500 mV (rms), high
impedance |
|
AUDIO ASSIGN (IN 2)
|
- |
- |
|
AUDIO ASSIGN (MONITOR OUT)
|
Analogue audio signal
output: 1 line, RCA x 2, 500 mV (rms) |
Analogue audio
signal output: 1 line, RCA x 1, 500 mV (rms)
|
|
External Control
|
MAKE/TRIGGER
|
RJ-45 x 1
(8-pin) |
|
RS-485
|
RJ-45 x 2 (IN/OUT)
(8-pin) |
- |
|
RS-232C
|
D-sub (9-pin) x
1 |
|
*1: DT-V9L1D; Component (common use) *2: DT-V17L2D;
Component only, DT-V9L1D; Component (IN only)
|
|
Carrying Case For JVC
DT-V9L1D
|
 |
Hard carrying case PC-4643N
Interior dimension in mm
L X W X H (mm)
421 X 303 X
430 |
 |
|
 |
