-
-
Clear-Com FreeSpeak II-BaseDigital Wireless Base Station |
-
Clear-Com FreeSpeak II Base Digital Wireless Base Station |
| Home > Clear-Com > Wireless >
FreeSpeak II > FreeSpeak II-Base |
-
Product Code: FREESPEAKIIBASE
 |
|
-
|
| Clear-Com FreeSpeak II Base: Overview |
The FreeSpeak II digital wireless base station serves as the heart of the wireless communication system for all FreeSpeak II digital wireless beltpack
users. All wired and wireless communications flow through the base station. Each wireless beltpack and wired intercom connection on the rear panel has its own
full-duplex port, and the voice communication from each is sampled, mixed, and re-routed throughout the system as desired.
The base station provides a front-panel vacuum fluorescent display showing
status and battery information. Each beltpack has its own timeslot and can be individually addressed by the base, allowing multiple combinations of
beltpack-to-beltpack and small-group conversations to happen simultaneously. The base station has connections for two Partylines and five 4-wires including a
dedicated SA output and Program audio input.
FreeSpeak II can operate as a standalone system, with up to 20 full-duplex wireless beltpacks connected to one base station. As an integrated solution
where beltpacks are seamlessly connected to a Matrix frame (via the E-Que-HX card), up to 50 user connections can be achieved (25 in the US). Active
Tranceiver Antennas can enable beltpack-to-base station distance range up to 3,200ft (1,000m). The system has 4-wire and partyline intercom connectivity,
program feed input, stage announce, IFB, up to 5 wireless partyline groups and partyline call alert functionality.
The FreeSpeak II base station can now intelligently mix 1.9GHz and 2.4GHz system
components such as the wireless beltpack and tranceiver antennas in the same system.
|
| Specifications |
| Base-to-Beltpack Frequency Response: |
100 Hz - 7.1 kHz. |
| No. of Beltpacks per Base Station: |
20 |
| No. of Transceiver/ Antennas Supported by Base, Basic Base: |
10 |
| No. of Active Antenna Ports: |
2 |
| PC Programming Port: |
DB9 |
| Relay Port: |
DB9 |
| Partyline Intercom A and Intercom B (each): |
XLR-3F with XLR-3M loop through, on/off termination switch (via software) |
| Four-Wire/Matrix Connection: |
4 RJ-45 (Intercom 3 - 6) |
| Program Input: |
XLR-3F, transformer isolated, line-level input |
| Stage Announce Output: |
XLR-3M, transformer isolated, line-level output |
| Front-Panel Headset: |
4-pin male connector with 2-channel capability and individual talks and listens |
| Front-Panel Display: |
254 x 32 dot-graphic VFD |
| Front-Panel Indicators: |
2 Talk LEDs for frontpanel headset, CH A and CH B partyline enable LEDs, Program Input enable LED, 10
individual antenna LEDs |
| Base-Station Programming/Editing: |
Push-to-enter rotary encoder |
| Dimensions: |
1RU unit, 1.75 x 19.0 x 12.5 in (44 x 483 x 312 mm) (HxWxD) |
| Weight : |
10.8 lbs (4.9 kg) |
|
| |
| Related Products |
|
|
| Clear-Com FreeSpeak II-Base Review |
|
Perfect Solution
By Lau on15 /2/2016
Freespeak II Base Station is able to connect to Motorola walkie-talkie with the help of TW-47 Two-Way Radio Interface. However, do note that original Motorola audio adapter and connectors are required for this solution to work perfectly.
|
|
|
Read our blogs
|
